DTM Race Driver 2 Crack working???

[frisk eucalyptus]

I confirm that the race driver 2 crack is working , but the colin 2005 is not : black screen, the error report...

[Sidney]

It doesn't work!
For some odd reason it wants daemon tools to be installed, that is not a crack.

[Bebu]

Originally Posted by Sidney

It doesn't work!
For some odd reason it wants daemon tools to be installed, that is not a crack.

and whats the problem for daemon tools


primary cause the crack works

[Fluffy88]

Did everthing according to discription but no success.
after starting patch daemon tools begin to work properly but a "disk not found" message from the game follows.

what´s the reason?
thnx for advice.

[Bebu]

Originally Posted by Fluffy88

Did everthing according to discription but no success.
after starting patch daemon tools begin to work properly but a "disk not found" message from the game follows.

what´s the reason?
thnx for advice.

have you reset the Starforce drivers by the crack thats very importent

[dede]

OK, this crack is a game loader, it's not multilingual because this mount automatic an GERMAN miniimage on demon tools,(you need demon tools on computer installed) after this crack Hide your IDE2, the crack enter a new GERMAN serial in the game registry folder and launch the game. Now i have French euro Multilingual game and the crack dosn't work because mini mountet image by SCRYSO's Crack is GERMAN. I use Alcohol 120% with my own euro mini image mountet + this crack only for Hide IDE2 work fine with this methode and no unplugin is needet. Sorry for bad english.

The same in french:
Ce crack vas monter une mini image ALLEMANDE sur le lecteur virtuel de demon tools, cacher l'IDE 2, entrer un serial allemand dans la clé du registre du jeu et lancer le jeu.

Comme notre jeu est une version euro multilingual Francais, cela ne marche pas et il faut en plus, monter une image EURO sur le lecteur virtuel d'alcohol 120%.

Comment utiliser:
Installer le jeu, Installation complete!
Faire la mise à jour 1.2,
Renomer rd2.exe du dossier principal du jeu en RD2_new.exe
Copier (CRACKFIX) RD2.EXE dans le dossier du jeu
Refaire un raccourcis vers le bureau de (CRACKFIX) RD2.EXE
Monter une mini image EURO sur le lecteur virtuel de Alcohol 120%
lancer RD2.EXE jouer.


The same in GERMAN

Einfach:

Daemon tools 3.47 installieren
Spiel komplet Installieren!
Das Update 1.2 Installieren!,
Rename “rd2.exe” der Hauptakte des Spiels in “rd2_new.exe”
(CRACKFIX) RD2.EXE in die Akte des Spiels kopieren
Eine neue verknüpfung zum Büro von (CRACKFIX) “RD2.EXE” machen.
RD2.EXE verknüpfung zum Spiel ausstoßen.
Schöhnen gruss auss Frankreich
Vielen dank an NCRYSO

Have Fun
If you found this is to complicate, use your original euro DVD to play.

[Brainman2k]

sorry, but imo thats no crack. a crack is a standalone file, that replaces the game-exe and/or some other files.
this sounds like some kind of shortcut to deamon-tools. maybe i'll give it a try, tho.

[Gaut]

Dede rep stp le crack il marche ou pas (ou est ce qu'il y a un moyen de le faire marcher) pour les francais?
Merci bc^p

[cursed-me]

Originally Posted by dede

OK, this crack is a game loader, it's not multilingual because this mount automatic an GERMAN miniimage on demon tools,(you need demon tools on computer installed) after this crack Hide your IDE2, the crack enter a new GERMAN serial in the game registry folder and launch the game. Now i have French euro Multilingual game and the crack dosn't work because mini mountet image by SCRYSO's Crack is GERMAN. I use Alcohol 120% with my own euro mini image mountet + this crack only for Hide IDE2 work fine with this methode and no unplugin is needet. Sorry for bad english.

The same in french:
Ce crack vas monter une mini image ALLEMANDE sur le lecteur virtuel de demon tools, cacher l'IDE 2, entrer un serial allemand dans la clé du registre du jeu et lancer le jeu.

Comme notre jeu est une version euro multilingual Francais, cela ne marche pas et il faut en plus, monter une image EURO sur le lecteur virtuel d'alcohol 120%.

Comment utiliser:
Installer le jeu, Installation complete!
Faire la mise à jour 1.2,
Renomer rd2.exe du dossier principal du jeu en RD2_new.exe
Copier (CRACKFIX) RD2.EXE dans le dossier du jeu
Refaire un raccourcis vers le bureau de (CRACKFIX) RD2.EXE
Monter une mini image EURO sur le lecteur virtuel de Alcohol 120%
lancer RD2.EXE jouer.


The same in GERMAN

Einfach:

Daemon tools 3.47 installieren
Spiel komplet Installieren!
Das Update 1.2 Installieren!,
Rename “rd2.exe” der Hauptakte des Spiels in “rd2_new.exe”
(CRACKFIX) RD2.EXE in die Akte des Spiels kopieren
Eine neue verknüpfung zum Büro von (CRACKFIX) “RD2.EXE” machen.
RD2.EXE verknüpfung zum Spiel ausstoßen.
Schöhnen gruss auss Frankreich
Vielen dank an NCRYSO

Have Fun
If you found this is to complicate, use your original euro DVD to play.

Thanks bur ı do all of this
and run game but alert again
dics read error when checking disc.
make sure a licensed disx is in the drive , the disc is nor damaged and the valid key is entered
U think what is the prob?????

[laS]

sorry for my bad english

i have so this game works on my machine

1. install demontools 3.47
2. game installation completely and install updatepatch 1.2
3. make backup of your original rd2.exe. than with the cracked rd2.exe (TOCA/DTM Race Driver 2 v1.0 [MULTI] Fixed EXE) from NCRYSO (4.3MB) reseting the Drivers and restart your machine
4. after restart start cracked rd2.exe and klick on "start" to reload the drivers, and restart machine again
5. after restart run starf***k to deactivate the drives
6. then in demontools create a virtual drive and mount the image (DTM Race Driver 2 v1.2 [GERMAN] No-DVD/Fixed Image #1) from gamecopyworld @ 15.10.04 (97KB) (not the #2 image)
7. !!! now start the game with the original rd2.exe . the cracked rd2.exe will not longer required

so, if after restart of your machine this game doesn´t works, you must in demontools unmount the image and disable the drives. than activate and deactivate again in starf***k all drives. after it once again create virtual drive and mount image. you must in demontools -> "set the device paramaters" set a drive letter

isn´t necessary any other/special serial, you can use the serial from original game. they is the same on every gamecover


this is no fake/joke, i have tested for hours on my machine and friends with updateversion 1.2 and it works perfectly

..........................
auf deutsch nochmal

also ich habs bei mir so zum laufen bekommen:

1. demontools vor dem spiel installieren
2. spiel vollständig installieren und den updatepatch 1.2
3. backup von der originalen rd2.exe mahcen, dann die gecrackte rd2.exe ins verzeichnis kopieren (TOCA/DTM Race Driver 2 v1.0 [MULTI] Fixed EXE) von NCRYSO (4.3MB)
4. die gecrackte exe ausführen und auf "reset drivers" klicken und neustarten
5. danach nochmal die exe ausführen und auf start klicken un dann neustarten
6. nun braucht ihr die gecrackte exe nicht mehr und müsst die originale rd2.exe wieder richtig benennen
7. mit star**** die laufwerke deaktivieren
8. dann erst in demontools das image emulieren (DTM Race Driver 2 v1.2 [GERMAN] No-DVD/Fixed Image #1) von gamecopyworld @ 15.10.04 (97KB) (nciht das #2 image)
9. spiel mit der originalen rd2.exe starten

diese andere seriennummer braucht man also doch nicht, geht mit der originalen auch.
getestet wurde es mit dem update 1.2, andere updates bzw. original 1.0 habe ich nicht probiert.

!!! nach einem rechner neustart kann es sein das das spiel nicht mehr geht, dann muss man in demontools das image unmounten und das virtuelle laufwerk deaktivieren.
danach mit star**** die anderen laufwerke wieder aktivieren und danach wieder deaktivieren.
dann mit demontools wieder ein laufwerk erstellen und das image neu mounten. du musst aber noch bei "set device parameters" einen laufwerksbuchstaben einstellen eventuell, falls das virtuelle laufwerk nicht erkannt wird.
jetzt kann man Race Driver 2 wieder spielen.

also bei mir hat es so funktioniert ohne probleme

das ist kein fake oder verarsche, nach stundenlangem probieren hat es so bei mir funktioniert.

[Bfam4t6]

Ok you may go ahead and call me an idiot for not understaning how this works but I did not waste my time posting this to be called names so if you'd like to help me out I would GREATLY appreciate anyone who would take the time to consideratly do so. I have read every post in this thread and I still don't know what to do.
Okay....I cannot figure out how to get this NCRYSO crack to work. I have read and understand the .nfo, but it is not working as it says. Basically the crack does nothing. The instructions say to run "RESET DRIVES" if starforce protection complains about it's drivers. My first try I just hit start game asuming that if i needed to reset the drives i would get an error about some starforce drivers as it says. .......nothing happened. Below "Bootlog" it says

Start requested, setting up ...

writing game serial (refer to NFO)


that is all tha happens. The quick exit does nothing and neither does clicking the X or minimuze button. The only way to get rid of it is "alt-f4". Ok so I tried again....same thing. The next time I decided that although it said to hit "RESET DRIVERS" if I got a complaint, which i didn't, I decided to run it anyways. I get a message that says to reboot my computer, hit start game, and then reboot again. So I rebooted, hit start game and guess what.....NOTHING HAPPENED!!! I d/l starclean from gamecopyworld and clicked it....got another reboot message so i did. I also d/l starf****r from gcw and it was in german so it didn't do much good either. I just now hit start game while taking a pause in my typing and guess what.........NOTHING HAPPENED! The .NFO says

- unpack the archive, burn or mount the DVD image
- install the game choosing full installation
- put the RD2.exe located in \NCRYSO folder on the DVD into your
gamedir, replacing the old one
- start the game and play! (*)

When asked for a serial enter:
********************

If you follow the * it says

(*) It is absolutely significant to have Daemon-Tools installed
and at least one virtual device added and accessible!

-The archive IS unpacked and it is mounted as a DVD image (via alcohol 120%)
-The game IS installed choosing full installation
-I DID put the RD2.exe located in the \NCRYSO folder on the DVD into the game directoy replacing the old on
-I TRIED to start the game but guess what..........NOTHING HAPPENED

and btw
-I DO have daemon tools installed and a virtual drive IS accessible.

If i simply need to wait for more than an hour with my computer idle for the stupid crack to do anything then by all means call me an impatient dumbass and disregard everything mentioned. But, if you can find it in you to explain the solution in and easy to understand manor please do. Thank you in advance for anyone willing to do so.