I think i killed my xbox and my xbit

[Copesnuffdss]

Try puting you chip on flash mode and then us Slayer,s auto installer it will flash chip with right bios and install evox

[Jay_83]

Turn the dipswitches to the same ones you flashed

ie if you flashed the chip "on off off off on" Thats the bank you've flashed. So you need to leave it on that!

[djgarf]

the dip switches can be set anyway u want when u flash it
it depends on how u format it and where u flash the bios as to where u set the dip switches

[Jay_83]

But if you flash bank 1 then change the dip switches to bank 2 it won't work.

Which ever bank you flash, you have to keep the dip switches on. Unless of course you use multiple bios's

[robpury]

There are a few things everyone should know about the x-bit 1.5......
1st: Use the 1.5 flash software when flashing a 1.5 chip, DUH. The old 1.0 software will not work and you will have errors. Download from http://www.dms3.com/
2nd: Unplug all USB devices (even keyboard and mouse; use ps/2 connections) This avoids no connection issues and random errors while flashing
3rd: Clean/scrape off the d0 points with a very small tipped screwdriver, nail, or thumbtack.

Besides the obvious dip switch settings, wire hookups, and the right .bin file/size(I'm using evox m8plus.bin) these three tips are by far the most important to remember when flashing and installing an x-bit 1.5. This chip will work on all 1.0-1.5 XBOX models solderlessly and the 1.6 with an adapter.