One massive copy&paste from CDROM-GUIDE... assembled by MajinGoten

[Mozbius]

1.b)

You can also try to record the audio-track(s) with cdrecord:

cdrecord dev=x,x,x -speed=x -multi -audio -swab taudio01.raw ... taudioxx.raw

But you have to shorten every audio-track by 2 blocks(maybe with some burners you
don´t have to ?!)
When the first session is ready you may want to check the correct LBA(see 1.a))

If CDRECORD reports an error about the wrong lenght of the audio-track or something,
try to add the [-pad]-option...

IF THE LBA DOESN´T MATCH the LBA from CDI-RIP for the 2nd session (data track),
DON´T TRY TO BURN THE DATA TRACK, or you´ll produce a coaster, instead try method (D)

1.c) tip from berniew - thank you
***I never tried this***

Here's what he did:

-tried burning with DJ, buffer underrun. noticed on the back of the disc there was
a small thin ring a few mm from the center of the disc
-closed session with adaptec easy cd creator (3.01)
(first check if necessary-->(A1), if you get no error with cdrecord [-msinfo] you
don´t have to...)
finalizing with EZCDCreator : CD -> CD-Info -> finalize ´multisession´
-used the "cdrecord dev=0,1,0 -msinfo" command, and it gave back "0, 11700"
-used cdirip on the .cdi file
-used "cdrecord dev=0,1,0 -speed=1 -xa1 X.iso"
-worked for silent scope! gonna try doa2le

that means you could use DJ to get a "coaster" on purpose for step 1 and then
cdrecord the .iso, hehehe!


1.d) You can try any other program, that allows you to burn a audio-multisession...
(FireBurner etc)


2.)
*
DON`T CONTINUE IF CD´s LBA DOESN`T MATCH ´original´LBA, CDIRIP GAVE YOU->use method (D)
*
OK, now you still have the 2nd session to burn.
You have 3 ways to do this:

a)
Use CDRWin and follow the instructions in the CDI-RIP read-me(did not work for me...)


b)
Use WinonCD
When the wizard comes up selct:

OTHER - TRACK IMAGE

Now double click on ´Track-Image´. Choose the ISO-Image CDI-RIP created (turn on *.*)
Now make sure you choose these settings :

File-format: 2048 - Mode 1 or Mode 2 - Form 1 data
Track-format: CD-ROM Mode 2
everthing else remains unchanged.
Now choose DISC, this time:

Close the CD
write immediately,
track-at-once
click RECORD

Hope it´s not a coaster again...
you´ll sometimes discover some space of unburned data between the 1st and 2nd
session(you can see it with your eyes).
In most cases your CD doesn´t work, when this happens(I have one game that boots
with this space between the sessions)
I think the main reason for this is CHEAP MEDIA !!!
10 Verbatim CD´s --> not a single coaster !!!
10 no-name CD´s --> every selfboot-game failed to burn..(space between sessions bug)