DVD'r Booting method for AR2v.2.12

[teo_hatz]

Hi all,

I have a scph 30003R ps2, a usb neokey s-box chip + a pnp stealth no solder v5/v6 with AR2 v2.12.

I had problems loading dvd'r. But I managed to load dvd backup using the following Method and works fine:

• Boot AR2 v.2.12 disc 1.
• At the main screen, press the EJECT button to eject the CD tray.
• Replace the AR2 disc with an original PS2 DVD game, such as Devil May Cry.
• Close the CD tray (press EJECT again) and wait for about 30 seconds.
• Select AR2 CODES
• Tongle on or off any code and then press START.
* Select START GAME
*Select WITHOUT CODES.
* Once the AR2 is asking to change the game disc, press the EJECT button and X (At the same time) till the light changes from green to orange.
• The CD tray will now open and you can replace the DVD game with your backup copy.
• The CD tray will automatically close after about 5 seconds.
• Wait till the the power LED changes from orange to green again and game will load.

I hope this will help

Teo_hatz
- scph 30003R ps2,
- a usb neokey s-box chip + a pnp stealth no solder v5/v6
- AR2 v2.12.

[bighap]

This is for GS 2.01 and above but it might work.
• Boot GS2 disc 1.
• At the main screen, press the EJECT button to eject the CD tray.
• Replace the GS2 disc with an original PS2 DVD game.
• Close the CD tray (press EJECT again) and wait for 15 seconds.
• Select gameshark codes and turn on or off any code on any game.
• Press start, select with codes and press x to load game.
• A black screen will appear saying "updating codes please wait"
• Do the R-mod swap by pressing and holding eject, swap with backup, tray will close and game will load.

• NOTE: The swap must be performed within the time you see the black screen.