|
|
|
#1
01-10-2002, 17:11
|
||||
|
||||
|
If the wires come off just by moving it......Its not the chips fault....Its your solderings fault....
I said if they ever get the CLIPS finalized....Not chips..... The CLIPS are supposed to make the mod chip almost like plug and play...You open up your PS2, unplug a ribbon, plug in the new ribbon to your chip and the board and your done...... Its a little more complicated than that, but you get the idea.... There has been talk, that when the CLIPS are done, it will only take about 10min to install a messiah...Of course that time doesn't include disassembly or reassembly..... Thats ALOT better than 3-4 hours of soldering..... 
__________________
[COLOR=blue][B]**V5 PAL** SCPH-30004 R W/[/COLOR][COLOR=red]Messiah[/B][/COLOR][b][color=blue][/b][/color] [color=blue][b]**V7 NTSC** SCPH-39001 W/ [/color][color=red] Messiah 2 [/color][color=blue](Installed by My M8: [/color][color=red]Dust2Dust[/color][color=blue])[/color][/b] :) [COLOR=blue][B]Pioneer DVR-A05 [/color][color=red] (FW 1.30) w/2X Ritek hack![/color][/b] :D [b][color=blue]Lite-On LTD-166S DVD-Rom W/[/color][color=red]Smart-X[/color][/b] [COLOR=blue][B]LG GCE-8320B W/[/color][color=red]8MB Buffer[/COLOR][/B] 
|
| Sponsored Links |
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
