Problem With my Ps2

[charlie_ps2]

You wouldn't have to select the game in GS2 unless you needed the codes.

Do try it without codes and it should work if ewverything else is OK.

Remember also that EA games need a special boot method. The modchip.com instructions are reproduced below and they make no mention of selecting the game on the GS2.

PS2 ModChip Usage:

PS2 Originals and PSX Originals:
Turn on normal (press Reset less than 0.5 seconds)

PS2 Backups:
Method 1: (for all Games including patched EA Backups)
1. Insert GameShark 2 / ActionReplay 2 CD1
2. Power Off the PS2 for 5 seconds
3. When you turn on your PS2 press Reset for 2-4 seconds (but not longer than 5 seconds) to activate the Chip - The PS2 will boot to the GS2 /AR2 Main Menu
4. Select START GAME
5. Select WITHOUT CODES
6. Press Eject when prompted
7. Swap GS2 / AR2 CD with your PS2 Backup
8. Press Eject to close Tray
9. Press X AS SOON as Tray closes
10. The game will load now

Method 2: (for all Games including EA Games)
1. Insert GameShark 2 / ActionReplay 2 CD1
2. Power Off the PS2 for 5 seconds
3. When you turn on your PS2 keep pressing Reset - The PS2 will boot to the GS2 / AR2 Main Menu
4. Select START GAME (Still pressing Reset)
5. Select WITHOUT CODES (Still pressing Reset)
6. Let go of the Reset Button and the Tray will open
7. You have 5 seconds to swap the GS2 / AR2 CD with your Backup
8. The Tray closes automatically after 5 seconds.
9. Press X as soon as the Tray closes (For GS2 / AR2 1.4 and above you need to press O + R1 until "Loading" appears instead of X)
10. The game will load now

PSX Backups:
1. When you turn on your PS2 press Reset for 2-4 seconds (but not longer than 5 seconds) to activate the Chip
2. Insert PSX Backup
3. Your PSX Backup will boot.