final fantasy 10, neo 2.2, dvd region x???

urziaz san · #1 28-10-2001, 13:50

hi evry1, i hav just brought the import version of final fantasy 10 from america and i hav also just brought the neo 2.2 modchip, the question i would like answering is how do i get ffx working, can i use dvd region x, action replay 2, this is on a uk ps2, and i know i hav to use a backup?.

has ne 1 out there got it to work?, if so plz tell me how.

thanx

#2 28-10-2001, 14:10

I rather think you ideally need the Origachip rather than Neo2.2 to play import originals such as FF X.

Your only hope for using NEO2.2 is to have the DVD copied on a Pioneer A03 using Veritas PrimoDVD software. You'll have to find someone who can do this. The use the DVD Boot method (involving a DVD with a larger TOC than FF X) posted in Sgt-Dan and other places. Whilst you're on the AO3, find out what size the TOC is in FF X.

Let us know how you get on.

urziaz san · #3 28-10-2001, 14:19

thx 4 the info, but assuming the copy works, wot software do i use to get it working, dvd region x, AR2, game shark?

#4 28-10-2001, 15:45

The below instructions are from www.ps2ownz.com

To create your working DVD-R back-ups, you may wish to use PrimoDVD software which is made by Prassi. In addition, a Pioneer DVR-A03 or comparable DVD burner is recommended! For step-by-step PS2 DVD-R burning instructions click HERE.

--------------------------------------------------------------------------------

HOW TO "DOUBLE SWAP" AN ORIGINAL PS2 DVD WITH YOUR DVD-R BACK-UP:

Procedure: This method requires you to use an original PS2 ORIGINAL DVD and also AR2 v1.7 CD:
1) Turn on the ps2 with GS2 v1.9 / AR2 v1.7 (holding down the ON/RESET).

2) Select Start Game (Still Holding ON/Reset).

3) Press EJECT (while still holding the ON/RESET button) and swap GS2 v1.9 / AR2 v1.7 with PS2 ORIGINAL DVD.

4) Press EJECT to close (Wait 10 seconds).

5) Then select WITHOUT CODES. Wait until disc stops.

6) Now let go of reset and the tray comes out, swap PS2 ORIGINAL DVD for a back-up DVD-R and press X just as the tray starts to go back in (IMPORTANT)!

NOTE: An 8-wire mod-chip is REQUIRED to do this (using it's "tray opener" function described above) and also please be aware that the DVD ORIGINAL DVD MUST have a bigger TOC than your back-up DVD-R!