|
|
|
#1
04-02-2003, 03:54
|
|||
|
|||
|
pc to xbox
when i try to connect via flash fxp all i get is "connection failed"i used the ip from the evox cd and password xbox but i can't get connected,could some one please help.
|
| Sponsored Links |
|
#2
04-02-2003, 05:55
|
||||
|
||||
|
If your going from your XBox to your PC and not using a hub, switch, or router you need a crossover cable.
If you have a hub, switch, or router then use two straight cables. XBox to hub, switch, or router. Then from the hub, switch, or router to your PC.
__________________
[SIZE=1]NTSC Ver1.0 XBox w/ [URL=http://www.gameshopusa.com/]X2.3 Lite[/URL] flashed with X2 4981.06 120GB WD 7200RPM 8mg cache Samsung SDG-605B * All stuffed in a beautiful translucent green case UK PAL Ver1.4 XBox ([i]not chipped yet[/i]) Stock 8gb WD Philips 6035/21 * All stuffed in a beautiful Crystal Clear case[/SIZE] [I]Having a BMW that says “Made in the USA” is like having a Rolls-Royce that says “Made in Japan”[/I]
|
|
#4
04-02-2003, 14:07
|
||||
|
||||
|
Trying pinging your XBox.
Start > Run > type command or cmd You should see a DOS window. Type ping 192.168.0.1 (Where 192.168.0.1 is the IP address of your XBox)) If you get a retrun try other FTP software, I use WAS_FTP Pro my self. If you dont get a retrun go back and check every thing.
__________________
[SIZE=1]NTSC Ver1.0 XBox w/ [URL=http://www.gameshopusa.com/]X2.3 Lite[/URL] flashed with X2 4981.06 120GB WD 7200RPM 8mg cache Samsung SDG-605B * All stuffed in a beautiful translucent green case UK PAL Ver1.4 XBox ([i]not chipped yet[/i]) Stock 8gb WD Philips 6035/21 * All stuffed in a beautiful Crystal Clear case[/SIZE] [I]Having a BMW that says “Made in the USA” is like having a Rolls-Royce that says “Made in Japan”[/I]
|
 |
|
|
Hybrid Mode
