Mini Compressor AIO 2021

[Carldric Clement]

Originally Posted by kj911

ISDone: Tested one/two languages configures INNO setups, and dont work. ISDOne, dont read the modified translated langfile, from during decompression process. Tested two <langname>.ini file, tested one langfile and without *.ini files, no more effect the ISDone messages. Any idea?

Hungarian translated ini file attached from testing.

Processing to updating MC. adding some language for Inno Maker.

[CustomMessages]
Language=ENG
MB= MB 
GB= GB 
TB= TB 
Hour=hour
Hours=hours
Minute=minute
Minutes=minutes
Second=second
Seconds=seconds
SystemCheckNavigation=Check if PC supports this app
InstalltionNavigation=Start Installation
TipsCaption=TIPS
Extracted=Extracting
FreeSpace=Free Space
NeedSpace=Needed Space
Progress=Completed: <Progress>
SpaceLeft=<FreeSpace> Disk Free Space
MemoryLeft=<MemoryLeft> Memory Free
LanguageChange=Change Language
;Btn Caption
ProceedBtn=Proceed
InstalBtn=Install
CancelBtn=Cancel
FinshBtn=Finish
BrowseBtn=Change

YesBtn=Yes
NoBtn=No
OkBtn=Ok

DialogMessage1=Notification
DialogMessage2=RESPONSE
DialogMessage3=MESSAGE
SetupExit=Setup is not complete. If you exit now, the program will not be installed.%nExit Setup?
FileNotInDir=The file "<FileName>" could not be located in the specified directory. Please select another folder.Want to Browse?

;Side Panel captions 
HomeLabel=Home
Infolabel=Information
SystemLabel=System Check
ConfigLabel=Configuration
ReadySideLabel=Logs
InstallSideLabel=Installation
FinishSideLabel=Finalization

;Welcome Page Captions
WelcomePageTitle=Home
WelcomeTitle=WELCOME
WelcomeCaption=Welcome to <AppName> setup wizard %nThis will install <AppName> on your computer
GuideTitle=GUIDE FOR INSTALLATION
GuideCaption=Follow these guides to help installation run smoothly
NavigationTitle=NAVIGATION
NavigationCaption=Use the sidebar on the left
More=MORE
Guide=Please turn off antivirus software during installation%nIf this is an online installation, please make sure you have internet

;Information Page Captions
InfoPageTitle=Information
InfoTitle=<AppName>
PackageTitle=PACKAGE
PackageDescription=<PACKAGEDESCRIPTION>
Other=OTHER
OtherPackageDescription=Genre: <GameGenre> %nRating: <GameRating> 

;Config Page
ConfigPageTitle=Configuration
DirPath=INSTALLATION PATH
SelectDirlabel=<AppName> will be installed in:
PathDetails=SELECTED PATH DETAILS
DirTip=Make sure you have enough space
FreeSpace=Free Space
NeedSpace=Needed Space
AfterSpace=Space After Installation
TotalSpace=Total Space

;System Page
RequiredLabel=REQUIRED
YourSystemLabel=YOUR SYSTEM
MoreLabel=MORE
VerdictLabel=VERDICT
OtherComponentlabel=OTHER COMPONENT
ProcessorPagelabel=System requirements | Processor
MemoryPageLabel=System requirements | Memory
GraphicPageLabel=System requirements | Graphics
WindowPageLabel=System requirements | Windows
Processor=Processor
Memory=Memory
Graphics=Graphics
Windows=Windows

;Ready Page
ReadyPageLabel=Review
sysReviewLabel=SYSTEM COMPONENTS
DirPathReviewTitle=INSTALLATION LOCATION
CheckBtnLabel=Check

;Installation Page
Installation=Installation
InstallPageLabel=Installation
ProgressLabel=PROGRESS
StatsLabel=STATISTICS
InstallationTip=Please wait while app is installed
ElapsedTime=Elapsed time
EstimatedTime=Estimated Time
RemainingTime=Remaining Time
TransferRate=Transfer Rate
CurrFile=File

;Finish Page
FinishPageLabel=Finish
FinishHeadingLabel=COMPLETING SETUP
FinishedLabel=<AppName> has been installed successfully%nClick Finish to close setup wizard
FinishGuideHeading=GUIDE FOR APPLICATION
FinishGuideHint=Follow these guides to help run <AppName>
FinishedGuideLabel=You can now launch the application from your desktop%nYou can find another launcher under your startmenu%nUse control panel programs and features to uninstall the application

EDIT: This is old... Were going to use new version later.

[Carldric Clement]

Mini Compressor AIO v21.4e - Stable Released

Changelog: here

Source code is updated on github. here

Go check it out.

[kj911]

How to resolve the kill idle xtool.exe process properly, after press Cancel button from during installation??

@Gehrman, posted the problems: https://fileforums.com/showpost.php?...&postcount=118

[Carldric Clement]

Originally Posted by kj911

How to resolve the kill idle xtool.exe process properly, after press Cancel button from during installation??

@Gehrman, posted the problems: https://fileforums.com/showpost.php?...&postcount=118

What I've seen here the installer might be didn't pause when pressing the Cancel button was not insert a code. When I check it back on my installer, nothing happens when I see it.

EDIT: Ask Cesar82 to solve that problem xtool.exe process to pause it when pressing the Cancel button.

[NouZ-Bi]

Hello, thanks you for this awesome tool.

I have a failure, when i try to compress using the insane parameter i have this error :

"Arc.exe: user error (Unsupported compression method or error in parameters: tor/$photo=lepton/$wavz=tta/$void=srep)"


Can you help me to fix it please ?

[fabrieunko]

Originally Posted by Carldric Clement

Processing to updating MC. adding some language for Inno Maker.
[CODE][CustomMessages]
Language=FR
MB= MB
GB= GB
TB= TB
Hour=Heure
Hours=Heures
Minute=minute
Minutes=minutes
Second=seconde
Seconds=secondes
SystemCheckNavigation=Vérifier si le PC prend en charge cette application
InstalltionNavigation=Démarrer l'installation
TipsCaption=TIPS
Extracted=Extraction
FreeSpace=Espace libre
NeedSpace=Espace nécessaire
Progress=Terminé : <Progress>
SpaceLeft=<FreeSpace> Espace libre sur le disque
MemoryLeft=<MemoryLeft> Mémoire libre
LanguageChange=Changer la langue
;Btn Caption
ProceedBtn=Procéder
InstalBtn=Installer
CancelBtn=Annuler
FinshBtn=Terminer
BrowseBtn=Modifier

YesBtn=Oui
NoBtn=Non
OkBtn=Ok

DialogMessage1=Notification
DialogMessage2=RÉPONSE
DialogMessage3=MESSAGE
SetupExit=La configuration n'est pas terminée. Si vous quittez maintenant, le programme ne sera pas installé.%nQuitter l'installation ?
FileNotInDir=Le fichier "<FileName>" n'a pas pu être localisé dans le répertoire spécifié. Veuillez sélectionner un autre dossier. Voulez-vous parcourir ?

;Side Panel captions
HomeLabel=Accueil
Infolabel=Informations
SystemLabel=Vérification du système
ConfigLabel=Configuration
ReadySideLabel=Journaux
InstallSideLabel=Installation
FinishSideLabel=Finalisation

;Welcome Page Captions
WelcomePageTitle=Accueil
WelcomeTitle=BIENVENUE
WelcomeCaption=Bienvenue dans l'assistant d'installation de <AppName> %nCela installera <AppName> sur votre ordinateur
GuideTitle=GUIDE POUR L'INSTALLATION
GuideCaption=Suivez ces guides pour faciliter l'installation
NavigationTitle=NAVIGATION
NavigationCaption=Utiliser la barre latérale sur la gauche
More=PLUS
Guide=Veuillez désactiver le logiciel antivirus pendant l'installation%nS'il s'agit d'une installation en ligne, assurez-vous d'avoir Internet

;Information Page Captions
InfoPageTitle=Information
InfoTitle=<AppName>
PackageTitle=PACKAGE
PackageDescription=<PACKAGEDESCRIPTION>
Other=AUTRE
OtherPackageDescription=Genre: <GameGenre> %nRating: <GameRating>

;Config Page
ConfigPageTitle=Configuration
DirPath=CHEMIN D'INSTALLATION
SelectDirlabel=<AppName> sera installé dans:
PathDetails=DÉTAILS DU CHEMIN SÉLECTIONNÉ
DirTip=Assurez-vous d'avoir suffisamment d'espace
FreeSpace=Espace libre
NeedSpace=Espace nécessaire
AfterSpace=Espace après l'installation
EspaceTotal=Espace Total

;System Page
RequiredLabel=REQUIS
YourSystemLabel=VOTRE SYSTÈME
MoreLabel=PLUS
VerdictLabel=VERDICT
OtherComponentlabel=AUTRE COMPOSANT
ProcessorPagelabel=Configuration requise | Processeur
MemoryPageLabel=Configuration requise | Mémoire
GraphicPageLabel=Configuration requise | Graphique
WindowPageLabel=Configuration requise | les fenêtres
Processor=Processeur
Memory=Mémoire
Graphics=Graphique
Windows=Windows

;Ready Page
ReadyPageLabel=Réviser
sysReviewLabel=COMPOSANTS DU SYSTÈME
DirPathReviewTitle=EMPLACEMENT D'INSTALLATION
CheckBtnLabel=Vérifier

;Installation Page
Installation=Installation
InstallPageLabel=Installation
ProgressLabel=PROGRES
StatsLabel=STATISTIQUES
InstallationTip=Veuillez patienter pendant que l'application est installée
ElapsedTime=Temps écoulé
EstimatedTime=Temps estimé
RemainingTime=Temps restant
TransferRate=Taux de transfert
CurrFile=Fichier

;Finish Page
FinishPageLabel=Terminer
FinishHeadingLabel=CONFIGURATION TERMINER
FinishedLabel=<AppName> a été installé avec succès%nCliquez sur Terminer pour fermer l'assistant d'installation
FinishGuideHeading=GUIDE POUR L'APPLICATION
FinishGuideHint=Suivez ces guides pour vous aider à exécuter <AppName>
FinishedGuideLabel=Vous pouvez maintenant lancer l'application depuis votre bureau%nVous pouvez trouver un autre lanceur dans votre menu Démarrer%nUtilisez les programmes et fonctionnalités du panneau de configuration pour désinstaller l'application

.

French

[Carldric Clement]

Originally Posted by NouZ-Bi

Hello, thanks you for this awesome tool.

I have a failure, when i try to compress using the insane parameter i have this error :

"Arc.exe: user error (Unsupported compression method or error in parameters: tor/$photo=lepton/$wavz=tta/$void=srep)"


Can you help me to fix it please ?

Lepton was not available. Use packjpg.

EDIT: use the given mc method like mcx or mcs. Mostly was done to solution.

[Shaer]

Hi there !
i'v compressed some data with Mini Compressor v21.4e Stable with msx method. Now i need to decompress it using cmd command. but every attempt i try resulting with some errors. Can u please tell me which files r needed to present in that directoty where i want to decompress with cmd command?
Thanks

[Carldric Clement]

Originally Posted by Shaer

Hi there !
i'v compressed some data with Mini Compressor v21.4e Stable with msx method. Now i need to decompress it using cmd command. but every attempt i try resulting with some errors. Can u please tell me which files r needed to present in that directoty where i want to decompress with cmd command?
Thanks

Unfortunately, some other precompressor wasn't able to fix that with cmd. Use Self-Extract on Mini Compressor itself.

[allgravy]

Thank you

[Carldric Clement]

Originally Posted by allgravy

Thank you

Okay?

[Carldric Clement]

Mini Compressor AIO v21.5f - Stable Released

Changelog: here

Source code is updated on github. here

Go check it out.

[Carldric Clement]

Mini Compressor AIO v21.6g - Stable Released

Changelog: here

Source code is updated on github. here

Go check it out.

[animussavior]

i use this settings with Mini Compressor AIO
lolz:dmo0:dto0:mc32:mtb16m:mt4:mtt1:tt1:fba4096

and using Windows Phone Script
but the installer giving me archive header is corrupt unarc.dll returned an error code 14
Error: archive structure corrupted (descriptor failed CRC check
is there any solution ?

[Carldric Clement]

Originally Posted by animussavior

i use this settings with Mini Compressor AIO
lolz:dmo0:dto0:mc32:mtb16m:mt4:mtt1:tt1:fba4096

and using Windows Phone Script
but the installer giving me archive header is corrupt unarc.dll returned an error code 14
Error: archive structure corrupted (descriptor failed CRC check
is there any solution ?

check the cls_lolz.dll and cls-lolz_x64.exe file if there exist.
if not copy from Mini Compressor > Resources > ISDone_resource
and paste to your ISDone from Windows Phone Script.

Also ask here to get how to add line to make support with lolz.