ASIS: Advanced Simple Installer Script

[LinkSystem]

My friends, I apologize in advance for my English ..
There is a problem - when installing the game there is an error in the console:
Found 0 files to register in RestartManager.
I've been suffering for 2 days, nothing comes out. tried everything. I looked through all the pages of the forum but the problem remained.

The installer doesn't see the unpack archives at all before unpacking my basket should start - this error comes up and the installer hangs completely until it detects the process manually (via the task manager). What could it be?

[ROKA1969]

How can I set two things?

1. I installed two games and made a collection out of them by throwing them into one folder. There are two separate folders with saves in the Documents folder. How do I set the Settings.ini file to uninstall both folders?

2. I added the Patch.bat file to the installer, it works properly, but after installing the game, it appears in the game folder. What should I do to make it not there? In previous updates, everything was fine.

Thank you for all suggestions.

[Bondpotter]

This is really cool and simple installer.

I want to know is there a way that if a game is already installed then installing it again will give the prompt to uninstall the game with message "game is already installed"?

Also is it possible to set game version?

[KaktoR]

From what I remember, it is not possible to rename the archives afterwards if you used diskspan method. If you checked the "Unlimited" tab in DSG or used the "Split mode", it should be possible though.

[Enluaphelis]

Originally Posted by KaktoR

From what I remember, it is not possible to rename the archives afterwards if you used diskspan method. If you checked the "Unlimited" tab in DSG or used the "Split mode", it should be possible though.

I got it, thx. But I still have an error after merging Setup.dll and Records.ini into one Setup.exe. Setup process simply crashes with that error: https://imgur.com/a/m1rzePe

This does not happen and installation works when Setup.dll and Records.ini being present. I want it to work with merged Setup.exe. Please help me

[KaktoR]

The folder structure has to look like this

https://i.imgur.com/NhRe98I.png

[Enluaphelis]

Originally Posted by KaktoR

The folder structure has to look like this

https://i.imgur.com/NhRe98I.png

Oh, so that is the reason why it did not work?
But DECOMPRESSOR folder in ASIS is empty. It was empty by default.

From where do I have to move this files into this folder?

And which ones do I have to move? For example in this repack I use msc+srep and srep+lolz

UPD: I threw everything in "Resources" folder of DiskSpan into DECOMPRESSOR folder and it still doesn't work, also tried with the same files on your screenshot

[KaktoR]

You have two choices:
1. Rename Setup.dll (which DSG creates) to Setup.arc and extract the file into DECOMPRESSOR folder with FreeArc.
2. In DiskSpan_GUI folder, go to "Resources\INSTALLER" and pick the files you need and copy them to DECOMPRESSOR folder.

For the second choice you have to pay attention to some things:
1. If you used precompressors like XTool, you have to create a folder with the same name in DECOMPRESSOR folder like the precompressor you used.
2. ARC_*.ini and CLS_*.ini are required in any case.

In your methods srep+msc and srep+lolz you have to copy the following files:
"Resources\INSTALLER\ARC\*" (all files here)
"Resources\INSTALLER\LOLZ\*" (all files)
"Resources\INSTALLER\MSC\CLS-MSC_TAK.dll"
"Resources\INSTALLER\SREP\CLS-SREP_NEW*.*"

However I recommend to follow the first choice, as it is the simpliest way.

[Enluaphelis]

Originally Posted by KaktoR

You have two choices:
1. Rename Setup.dll (which DSG creates) to Setup.arc and extract the file into DECOMPRESSOR folder with FreeArc.
2. In DiskSpan_GUI folder, go to "Resources\INSTALLER" and pick the files you need and copy them to DECOMPRESSOR folder.

For the second choice you have to pay attention to some things:
1. If you used precompressors like XTool, you have to create a folder with the same name in DECOMPRESSOR folder like the precompressor you used.
2. ARC_*.ini and CLS_*.ini are required in any case.

In your methods srep+msc and srep+lolz you have to copy the following files:
"Resources\INSTALLER\ARC\*" (all files here)
"Resources\INSTALLER\LOLZ\*" (all files)
"Resources\INSTALLER\MSC\CLS-MSC_TAK.dll"
"Resources\INSTALLER\SREP\CLS-SREP_NEW*.*"

However I recommend to follow the first choice, as it is the simpliest way.

I agree with the 1st choice, I renamed it to .arc but how do I extract it? How do I use FreeArc? When I open Arc.exe it just closes. Sorry for stupid questions, I'm a newbie

[Cesar82]

Originally Posted by Enluaphelis

I agree with the 1st choice, I renamed it to .arc but how do I extract it? How do I use FreeArc? When I open Arc.exe it just closes. Sorry for stupid questions, I'm a newbie

If you are using DiskSpan GUI to compress and want to create Setup.dll before compression you can use the TOOLS button, "Setup DLL" tab.
Choose the "MAKE" subtab and paste a method line on each line of the memo and click "Make DLL".
If you are in doubt about the method lines used, you can generate them by searching for the method in another instance of DiskSpan GUI or in DSG_Settings.ini in the "Resources" folder (if you have already configured your methods in Developer mode).

[Enluaphelis]

Originally Posted by Cesar82

If you are using DiskSpan GUI to compress and want to create Setup.dll before compression you can use the TOOLS button, "Setup DLL" tab.
Choose the "MAKE" subtab and paste a method line on each line of the memo and click "Make DLL".
If you are in doubt about the method lines used, you can generate them by searching for the method in another instance of DiskSpan GUI or in DSG_Settings.ini in the "Resources" folder (if you have already configured your methods in Developer mode).

It worked! Thank you!
So in this case I don't have to put stock Setup.dll from DSG into DECOMPRESSOR when doing final Setup.dll? Only put decompressed files from .dll and records.ini, right?

[Cesar82]

Originally Posted by Enluaphelis

It worked! Thank you!
So in this case I don't have to put stock Setup.dll from DSG into DECOMPRESSOR when doing final Setup.dll? Only put decompressed files from .dll and records.ini, right?

you will only need to merge records.ini.
For that you can use the "Records" tab in the same tool tab group as the DSG.

[Enluaphelis]

Any way I can change colors of the button hover, selection and progress bar?
https://imgur.com/a/73NZvTb

[KaktoR]

The color is part of the skin file. Unfortunatelly you cannot change it.

[LinkSystem]

Hello brothers! I want to apologize right away for English (I use Google translator). Please make someone an archive for an example - put all the necessary files (data-1.bin, data-2.bin ... + ready-made files setup.dll , Records.ini ...). I need this to understand how everything works in more detail using an example. To the archives of the game (data-1.bin, data-2.bin) you can put any small files, this is just for example. The main thing is that everything is installed from this archive, as if this is the game. Thank you in advance! Have a nice day!