ASIS: Advanced Simple Installer Script

[KaktoR]

New version added

v7.1.1a
_____________________________________________________
- Removed ISUtils.dll
- Added green indicator if Hardware match the requirement
- Updated BASS Audio Library to v2.4.14.0
- Added some help to Settings.ini

[kocchi96x]

This happens if you partially meet the requirements.

the bottom one i edited the placement just so no overlapping.
also since 7.1.1beta System has been red for anything other then 1000 for windows 10 below versions will show in red and didn't happen in 7.1.0.

Edit: also i had to go to post 468 with your fix their to get CustomMessages.iss, and that one was no different with the image.
also did have another problem for when it was done the finish button wouldn't show and the pause button was more into the picture on finish page, but so far i haven't seen it with the 7.1.1a as of yet.

[KaktoR]

Thanks for info. I will correct this in a hotfix.

Additionaly I will add text if not all requirements are green.

For example if only cpu mhz is below requirement and all other are OK, text says "Your system does partially meet the hardware reuirements" or something like that. Will test something out.

[kocchi96x]

just found out with the new bass.dll im not able to turn the music back on if i turn it off, when i hit the button for "Music: ON" it stays instead of going to "Music: OFF". I put the old dll back in and im able to turn it back on.

[Titeuf]

Hello,
I just applied the fix 7.1.1.a and I have this error message see my picture.
thank you

[kocchi96x]

Originally Posted by Titeuf

Hello,
I just applied the fix 7.1.1.a and I have this error message see my picture.
thank you

download file from Here and get the CustomMessages.iss and copy it over.

[Titeuf]

Originally Posted by kocchi96x

download file from Here and get the CustomMessages.iss and copy it over.

Hello Kocchi96x,
thank you very much

[Kamalxhero]

I have found two problem..
1 system requirement OS Check!
2 Diskpan Not Supported!

1] i change OS to *OS=611 or 621/631
then system check:os Line go to red in windows 10,
but it should be green, right?
cause windows 10 can handle all Previous Os,
To work i have to change
OS=1000 then its OK,
please check that

2] can't Decompress Diskpan Data.bin.001 *** files...
Only Data.Arc can.. can you add Diskpan compatible?

i have setup.bin. 001 files created by Diskpan,
but can't unpack them with ASIS.

It will really helps
if you could do this
If it's possible please add thia option.

Inside:
Settings.ini
[ExtractSettings]

UltraARC=0 (0 off / 1 on)
UAName=Data1.Arc
UASecond=Update1.2.0.arc
UAThird=DLC Pack.arc

Diskspan=1
DPArchName=setup.bin.001
DPSecd=Update6.bin.001
DPThird=Dlc.bin.001

second, third archives is very helpful
If it's possible. pls add those options..

[KaktoR]

For diskspan:
You have to edit Records.ini file

[Record1]
Type=Freearc_Original
Source={src}\Data1.bin.001
Output={app}
Disk=1

Make records.ini internal if you wish to not use it alongside Setup.exe (it will be extracted to %temp% folder then).

For the hardware issue:
I'm about to fix this. Have some brain breaks atm

[Kamalxhero]

Originally Posted by KaktoR

For diskspan:
You have to edit Records.ini file

[Record1]
Type=Freearc_Original
Source={src}\Data1.bin.001
Output={app}
Disk=1

Make records.ini internal if you wish to not use it alongside Setup.exe (it will be extracted to %temp% folder then).

For the hardware issue:
I'm about to fix this. Have some brain breaks atm

brain breaks?
Thanks... for doing this.
it's pretty good.

[Titeuf]

Originally Posted by KaktoR

For diskspan:
You have to edit Records.ini file

[Record1]
Type=Freearc_Original
Source={src}\Data1.bin.001
Output={app}
Disk=1

Make records.ini internal if you wish to not use it alongside Setup.exe (it will be extracted to %temp% folder then).

For the hardware issue:
I'm about to fix this. Have some brain breaks atm

Hello KaktoR,
For this :

Make records.ini internal if you want to use it alongside Setup.exe (it will be extracted to% temp% folder then).

How should I do, please?
thank you

[Kamalxhero]

Originally Posted by Titeuf

Hello KaktoR,
For this :


How should I do, please?
thank you

Simple

Open Settings.ini
Change 0 to 1

[ExtractSettings]
InternalRecords=1

Make sure,
you have configure records.ini
and DefaultinstallDir

[Kamalxhero]

Another Bug!

set this and run test you will see!

[Background]
Enable = 0

then while installing,
try music off and on not working properly.

When installed finish
there's no Finish button available.
Only Pause Button available,
but it's in middle not in the right place.
and music button in right place..

No Finish button!

Finish button is nowhere to be found
and please hide that Pause/Resume button on Finish Page.

add ztool Decompress missing dlls Hif2raw and raw2hif
otherwise it won't work properly...

[KaktoR]

I will see if it's possible

[KaktoR]

Yes it's possible:


HW detection is now fixed too!

v7.1.1b
_____________________________________________________
-Fixed Music Button
-Fixed Hardware detection (thanks to peterf1999 for the help)
-Fixed Finish Button if CRC Check is not used
-Fixed some other bugs
-Website Button is now not visible on Installing Page
-Added Background ON/OFF button on Installing Page
  > With this button you can toggle install background on/off