|
1. DF: Landwarrior CD 1 for 1 copy
Delta Force: Land Warrior
CD COPY Instructions
(CloneCD Version 2.8.3.1)
(LG CD-RW CED9090B Hardware used)
1. Select "Copy CD"
2. "READ" file tab
- Select your burner as the reader
- Read Speed: set to Max
- Read SubChannel Data from Data Tracks checked
- Read SubChannel Data from Audio Tracks checked
- Fast Error Skip checked (with dialog box options set to their default)
- Intelligent Bad Sector Scanner checked
3. "WRITE" file tab
- Select your burner as the writer
- Write Speed: set to Max (unregistered CloneCD will burn at 2x)
- Don't Repair SubChannel Data unchecked (or shaded out)
- Simulate Writing unchecked
- Burn Proof/Just Link unchecked (or shaded out)
- Perform Laser Power Calibration unchecked
- Wait until Buffers are full unchecked
- Always close last Session checked
4. "GLOBAL" file tab
- File Buffer Settings set to Default
5. Select "Start Disk Copy"
6. When reading is done, eject disk and put in an 80 min CDR for writing
Comments:
You'll notice the progress bars will not load and no estimated time will
show. Time took approximately 2 hours.
|