|
hey guys, i figured out how to make an almost full screen setup wizard with CIU. just go into setup.ini and under 'Setup Interface' and 'Autorun Interface' change the 'width and height' to something like Width=1038 and Height=650
or if you want more room to position your button in, Width=1093 Height=750.
dont forget you will need to change the actual image sizes of your png autorun/installer1/installer2/installer3/etc pictures using a freeware or commercial image editor. I recommend irfanview for basic resizing but if you really want to get fancy, you can use photoshop. of course there are plenty of other freeware and payware image editors, i just find these two the easiest to use. also for the small installer, if you want a big small installer image, change 'Width and Height' under small installer to 630 x 330 respectively. Also keep in mind when you adjust the picture, you may also want to use razor12911's graphicstudio to adjust the left/top position of the buttons, but since there is no actual gui to do this, it will take trial and error. i am going to write a quick tutorial and attach it to the next post on how to do this.
paws out.
-Kitsune
Last edited by Kitsune1982; 12-09-2019 at 11:23.
|