Hi all, I've been lurking here for a few years and finally decided to post a tutorial using some freeware tools you all
probably are familiar with, ultraarc and such, but today i am posting a thread on a new technique i found.
unfortunately one of the tools i use you will have to find yourself as i cannot post an attachment as it is shareware
and you need the full copy to get the full effect of this tutorial. anyway the name of the tool is game extractor 2.0
by watto studios. its only 5 bucks for the paid version and it was worth every cent of it i paid. the tool is amazing.
you can extract and modify almost any game archive. myst mhk, syberia syb files, lotr battle for middle earth .big
files.. you name it it probably can do it. =3
ok anyway heres what you do. p.s. this tutorial is for the witcher enhanced edition dvd9 version.
1.get a copy of the tool, game extractor 2.0 - ps, i read somewhere the author posted the full LEGAL version of an
older version 1.5 on the mod the sims2 site but dont quote me on that.
2.get a LEGAL copy of the witcher enhanced edition.
3.copy all the files from disk 1 and 2 into a folder marked 'WitcherEE' and follow this tutorial - i will paste it for
those too lazy to look it up. lol.
4. The Witcher Enhanced Edition [English Only]
The Witcher Enhanced Edition ENGLISH Only DVD5
You need atleast 20GB of free space on harddrive (10GB for dvd content, 10GB for doing repacking of cabs)
1) Copy all files from DVD1 and DVD2 to SAME TEMP folder
2) Download needed files
twee-eng.zip
intro.7z 89.79 MB
outro.7z 38.17 MB
3) Extract intro.7z and outro.7z into TEMP folder
4) Extract twee-eng.zip into TEMP folder, overwrite when asked
5) Run batch files
1_remove_vo.bat
2_replace_biks.bat
3_clean_up.bat
6) Delete Docs* folders except DocsENG
7) Edit setup.ini and change EnableLangDlg=Y to EnableLangDlg=N
8) Add crack folder
9) Burn or make iso with label of your choice
NOTES
When installing you don't need to uncheck languages which was removed
Intro.bik and outro.bik is replaced with highly compressed biks.
Intro.bik Original 1280x720 Avg Data Rate: 1,128,090 / Compressed 640x360 Avg Data Rate: 213,989 (Compressed to 20% of
the original)
Outro.bik Original 1280x720 Avg Data Rate: 1,200,124 / Compressed 640x360 Avg Data Rate: 240,556 (Compressed to 20% of
the original)
Videos are still very watchable when scaled, some blockiness and just not sharp as original.
5.once thats done, download the ultraarc_mods.7z from this forum and the script of your choice depending on your
preferred repack tool.
6.extract it to your hard drive or thumb drive, but make sure you have at least 20 gb of space - so i recommend your
hard drive or an external/and/or SSD hd. put ultraarc_mod - i used 2040 - along with ultraarc.ini in the folder with
your WitcherEE folders. i say folders because i forgot to mention you put the big files and folders in the first folder
WitcherEE_1 and the small files in the second. oh and if you havent figured it out already, you HAVE to install the
full game to your hard drive in order for this to work.
7.move all the files from the root directory of the game to WitcherEE_1 and the small files along with the remaining
folders into WitcherEE_2.
8.open ultraarc.ini in notepad and set the following -
====
[UltraARC]
Source=D:\TWEE-Disk1
FirstVolumeContent=
Output=WitcherEE_Out
[Options]
VolumePrefixName=WitcherEnhancedEdition_
CDImage=False
BinkIt=True
OggEncode=True
CrunchTexture=False
SelfExtractor=False
[Compressor]
Freearc=True
7-Zip=False
WinRAR=False
[Split]
FirstVolumeSize=2000
CustomVolumeSize=2800
ThresholdPercent=30
[Distribution]
ArchivePrefixName=Data
ArchiveExtension=bin
[Freearc]
Method=srep,lzma
PrecompVer=0.38
PrecompJPG=False
====
9. after you save the ultraarc.ini file in the TWEE_Disk1 folder you need to create beforehand,
open up ultraarc - remember to put it IN the folder with the two folders, not in each WitcherEE folder!
p.s. if you're wondering why i enabled oggencode and bink it in the options, the game install has ogg audio and bik
movie files.
10. set your output dir to the one specified in the above .ini, add X:\TWEE_Disk1 - x being your hd letter - as source,
leave firstvolumecontent alone and make sure everything is set correctly. then click 'export config' then 'start'.
The process will take about 30 minutes to an hour or more depending on your ram and cpu speed, so grab a sandwhich or a
beer or whatever and wait it out. it will go through the encoding process 4 times, running 2 cycles each time.
when its done, check your output folder and your jaw will drop to the floor. 9.2 gb compressed to 2.87 gb!!! no joke, i
will include a picture as proof, as well as an attachment with the proper file layout and my ultraarc.ini.
click the links below and you will have proof magic does exist in the computer world =D
Cheers!
Kitsune1982: )