|
There are three common reasons for this and Backitup got one of them, you could try changing the disc over a little faster (within 5 sec) as stealth code has a 5 second timeout when the cd lid is first opened. You have 5 seconds to change to the second disc and close the lid before the mod chip powers down.
The other two reasons are a little more difficult to sort out and both involve a re installing your mod chip or installing a new one.
1, The mod chip you have installed has stealth code but is installed incorrectly (The wrong diagram has been used or not enough wires connected).
Solution: Re install the mod chip using a different diagram
2, The mod chip itself has an early version of the stealth code where the 5 second timeout didnt actually work, therefore the chip was only active during the first boot after powerup and then turns off. The only way to reactivate the chip was to switch off and on the unit again (no good for double disc games).
Solution: Unfortunately you need a new mod chip installed to correct this one.
Trying to decide whether its due to an incorrect install or duff code in the chip is not easy, and you may be better off just having your PSX re moded.
Sorry for the bad new's but i personnaly think your trouble is due to one or both of the above.
Please check my profile and email me if you need any further help, i would need to know your psx model number.
__________________
WinOrBin... Together we will WIN.....
Chat I.D. : ngen69uk
|