[spooky]

I downloaded the diags from these guys for the ###ne and found that they would'nt work with the hex i had, took me a while to find the correct hex and diag but i didnt have the same "insert PSX format disc" after removing the chip.

In the past i have highly recommemded this site as the diags and hex have been spot on.

It is possible that you have knackered it, but first check the motherboard for any shorts caused by small amounts of solder left behind when the chip was removed and also check that the laser wafer cable is re-inserted correctly.

If you have no joy then drop them an email as they are usualy very reliable.

Hope you get it sorted.