[dunedog]

My PS2 was making the famous clicking noise, so I took it apart to dust it out and swab the laser lens. I've done this before and all worked ok afterwards. Now things are different.

It appears the laser mechanism is stiff to move. I have lubricated the rails. It moves a little easier, but still seems stiff and sometimes makes a clicking sound when moving it back and forth.

When turning it on the drive spins, but it appears the laser is not moving back and forth at all.

I do not get any erros on the screen. I just get the browser screen. I have the Matrix Infinity and I can disable it upon start up, but that does not do anything to solve the problem.

I've heard there is a gear of the laser, but I can't see it. I'm not sure how to further dismantle the unit. I see there is a tiny hex type of screw on one side of the laser mechanism. Is this for adjusting the resistance of the mechanism on the rails?

All I see is a ribbon cable plugging into the laser mechanism. Not sure what that ribbon cable plugs into on the other end.

I have tried turning and running the PS2 upside down, but that did not work either. I think that trick is only for laser lens problems. I think mine is with the whole mechanism not moving.