Oh no! I've understood just now, that I have to use a CD-RW and not a CD-R. So it couldn't have worked, also if the values were right
*edit*
hmm... I've found a german tutorial, but I get the same solution (the 533MB image
)
Maybe that will help you to help me
:
That are the steps after which I worked:
1. burn the image (8x, RAW/DAO)
2. execute the *.bat file:
sfcdvd.exe //./F: trackmaniager.txt s24 t5 m0 v0 > track_log.txt
3. I got the track_log.txt:
Phase2: RPM 1472.001 = 40.761 ms (deviation 0.012 ms)
Phase2: SPR 18.426 = 19-3.02%
Phase4: RPM 1285.052 = 46.691 ms (deviation 0.051 ms)
Phase4: SPR 21.290 = 22-3.23%
Phase3: RPM changed by -13.56%
Phase3: Sector shift used: 0 0 0 0 0 0
Phase3: Step 1: Angle 114 degree = 265-151 (SPR 18.9 = 19.0 deg/sector)
Phase3: Step 2: Angle 333 degree = 350-17 (SPR 19.4 = 18.5 deg/sector)
Phase3: Step 3: Angle 253 degree = 95+158 (SPR 19.9 = 18.1 deg/sector)
Phase3: Step 4: Angle 26 degree = 75-49 (SPR 20.4 = 17.7 deg/sector)
Phase3: Step 5: Angle 183 degree = 235-52 (SPR 20.8 = 17.3 deg/sector)
Phase3: Step 6: Angle 338 degree = 120-142 (SPR 21.3 = 16.9 deg/sector)
Phase3: Sector shift recommended: 8 1 11 3 4 9
4. I used the "recommended Sector shift" and got these Angle Values:
Phase2: RPM 1471.946 = 40.762 ms (deviation 0.013 ms)
Phase2: SPR 18.421 = 19-3.05%
Phase4: RPM 1290.233 = 46.503 ms (deviation 0.089 ms)
Phase4: SPR 21.384 = 22-2.80%
Phase3: RPM changed by -13.16%
Phase3: Sector shift used: 8 1 11 3 4 9
Phase3: Step 1: Angle 278 degree = 265+13 (SPR 18.9 = 19.0 deg/sector)
Phase3: Step 2: Angle 346 degree = 350-4 (SPR 19.5 = 18.5 deg/sector)
Phase3: Step 3: Angle 92 degree = 95-3 (SPR 20.0 = 18.0 deg/sector)
Phase3: Step 4: Angle 77 degree = 75+2 (SPR 20.4 = 17.6 deg/sector)
Phase3: Step 5: Angle 227 degree = 235-8 (SPR 20.9 = 17.2 deg/sector)
Phase3: Step 6: Angle 128 degree = 120+8 (SPR 21.4 = 16.8 deg/sector)
Phase3: Sector shift recommended: 7 1 11 3 4 9
5. The differences are under 15 degrees, so patched the image
6. I patch it and get the 533MB image
