|
Yeah the chip was stuck into the board using double sided tape, would that of been ok for static?
The gound point used was LPC pin 2, that point is connected to the screw ground point. Used a multimeter to check. I used the guides on xbox-scene to determine which version i had. It said that if LPC pin 2 was connected to the ground points that it would be v1.4. So instead to soldering to LPC pin 2 i could of soldered it to the screw hole but it would of be the same.
I will contact the dude i got the chip off and see what he recommends.
Thanks for your help.
Slats
__________________
[color=blue][b]SCPH-30002 R V5 PAL[/b][/color][color=blue] Messiah Clone[/color]
[color=blue][b]Xbox V1.4 w/ Apple X V Mod[/b][/color]
[color=blue][b]Pioneer A04 Firmware 1.33[/b][/color]
[color=blue][b]Plextor Premium[/b][/color]
|