Even has the same type of boot procedure and PAL V7 limitations:
Operations Procedures:
- Direct boot all PS2 Media (CD/CD-R/DVD/DVD-R/DVD Silver/ Import Original) except for PAL V7 (see below).
- There is a restriction on the Magic 2 v7 applicable to PAL PS2s whereby it can only play PS1 games from the same region as the PS2. So a PAL v7 can only play PAL PS1 games (30002/3/4 are interchangeable in this regard).
With the disk assumed in the tray and the tray closed:
- For PS2 games, power up normally from STANDBY with RESET button. A single tap is required.
- For PS1 games & DVD Movies, power up from STANDBY with RESET button held until the blue EJECT light comes on; then release RESET and the disk will boot.
- Please turn off the PS2 (to standby) before changing Mode (PS1/PS2/DVD)
- For soldering the power and ground wires, please use a thicker cable (22awg=21swg)
- For soldering to the other points, please use 32awg=34swg cable
Everybody check out the website: China-Matrix.com
__________________
[COLOR=blue][B]**V5 PAL** SCPH-30004 R W/[/COLOR][COLOR=red]Messiah[/B][/COLOR][b][color=blue][/b][/color]
[color=blue][b]**V7 NTSC** SCPH-39001 W/ [/color][color=red] Messiah 2 [/color][color=blue](Installed by My M8: [/color][color=red]Dust2Dust[/color][color=blue])[/color][/b] :)
[COLOR=blue][B]Pioneer DVR-A05 [/color][color=red] (FW 1.30) w/2X Ritek hack![/color][/b] :D
[b][color=blue]Lite-On LTD-166S DVD-Rom W/[/color][color=red]Smart-X[/color][/b]
[COLOR=blue][B]LG GCE-8320B W/[/color][color=red]8MB Buffer[/COLOR][/B]
Last edited by BG; 22-09-2002 at 19:24.
|