[dpaddict]

As for the cdrw, i only tested on that to make sure it would burn teh audio sessions and get a 45000lba.

Ok now im ready to bang my head against the wall, i just burnt a disc using the 45000lba method only for it to boot up to the dreamcast menu screen.
I did everything right i think, heres what i did:

1. Copy all the files off the cd to the \data directory.
2. Changed all the attributes of Read Only off.
3. Moved the ip.bin to the \Selfboot directory.
4. Created the two audio files using the command 'mktmp audio.raw 39332496' and 'mktmp audio.raw 39332496'
5. Burnt these files using the command 'cdrecord -dev=1,1,0 -multi -audio audio.raw audio2.raw speed=4
6. Checked that if was the correct lba with msinfo, it was
7. Created a 257mb dummy file called 00dummy.dat and placed it in the \data directory.
8. Made the ISO using the command 'mkisofs -C 0,45000 -V F355 -l -o data.iso data
9. After the ISO was created i used inpins.exe to insert the ip.bin into the ISO.
10. Used Cdrwin to burn the ISO image using CDROM-XA, Mode2, Finalize/Close Session - Yes, Write Postgap - Yes, Open new session - No.

Any ideas where im going wrong?