FileForums - [hekp] in compressor of Razor

FileForums (https://fileforums.com/index.php)

- Conversion Tutorials (https://fileforums.com/forumdisplay.php?f=55)

- - [hekp] in compressor of Razor (https://fileforums.com/showthread.php?t=96302)

[hekp] in compressor of Razor

hi

i always face problems with the compressor of "Razor"

after the cmd window completed 100%

i found nothing in the output !!!

Code:

a -ep1 -r -ed -lc512 -ld512 -mt1 -msrep64+delta+lzma64:a1:mfbt4:d158m:fb273:mc1000:lc8 "Y:\test\setup-1.bin" "U:\Middle Earth Shadow of Mordor\*"

what is the problem ?

NOTE: my RDP is 32GB RAM and 2xE5620

Middle Earth Shadow of Mordor :D Test other methods of compression, change algorithm:)

i think you should not use 64bit compression......... and razor tool worked fine with me. :D
If the problem occurs then try manually using kurutcu compressor....
again if problem occurs.. use every thing manually,
process the file with arc -m0 , then with srep then with lzma..(in case of emergency)

thnx guyz for reply

but my RDP windows is x64 , so i use the x64 version

i'm now asking about the Compression Memory and precomp version

what should i type ?

some users say that i should type my computer memory (32 GB ) ???????

the max memory which can be typed in the pp is 4gb!

Quote:

Originally Posted by Alash Als (Post 434491)

If the problem occurs then try manually using kurutcu compressor....

can you please link me it ?

http://fileforums.com/showthread.php?t=94425

you will find kurutcu compresser in this script......

and i use srep+precomp+lzma:a1:mfbt4:d158m:fb273:mc1000:lc8

and memory is 1700mb and decompression is 1000mb

i also use 64bit operating system but 64bit compression is a bit messy...
so i use normal one and use precomp 0.42 as it has cls support or precomp inside support and also about precomp progress bar on compression you can use real packjpg.dll and for precomp 0.42 use {-intense0 -c-} in arc.ini

as i said before that some game does not support precomp so u have to use only srep+lzma and hope for best :)

Quote:

Gamer009

not all the donuts, they can with a hole :D

use SREP+lzma normal mode

-msrep+delta+lzma:a1:mfbt4:d158m:fb273:mc1000:lc8

Quote:

Originally Posted by Dante1995 (Post 434503)

not all the donuts, they can with a hole :D

use SREP+lzma normal mode

-msrep+delta+lzma:a1:mfbt4:d158m:fb273:mc1000:lc8

ok, gonna test , thnx a lot <3

Quote:

Originally Posted by Alash Als (Post 434500)

ok, mate thanks a lot for gr8 help

gonna test this compressor

i hope that i can use it properly, as i'm a bit noob :D

Quote:

Originally Posted by Alash Als (Post 434500)

thanks again, mate

but i have a problem now

in the archive.ini

i must type : ISPrecompExtract or ISArcExtract ?

i'm using this line in compressing :mprecomp+srep+delta+lzma:a1:mfbt4:d158m:fb273:mc1 000:lc8

(i think it's a precomp , i'm asking to check :D

also, there's another problem

[see the attachment]

Quote:

Originally Posted by Gamer009 (Post 434574)

You need to download here!

Code:

Inno Setup Enhanced Unicode v5

works , thnx a lot <3

but please the following question :)

--------------------------------------------

and what about this :

Quote:

in the archive.ini

i must type : ISPrecompExtract or ISArcExtract ?

i'm using this line in compressing :mprecomp+srep+delta+lzma:a1:mfbt4:d158m:fb273:mc1 000:lc8

(i think it's a precomp , i'm asking to check

btw, here's my archive.ini

Quote:

if not ISPrecompExtract ( 0, 50, ExpandConstant('{src}\Setup-1.bin'), ExpandConstant('{app}'), '', false, '', ExpandConstant('{tmp}\arc.ini'), ExpandConstant('{app}'), False) then break;
if not ShowChangeDiskWindow ('Please Insert Disk 2 To Continue..', ExpandConstant('{src}'),'Setup-2.bin') then break;
if not ISPrecompExtract ( 0, 50, ExpandConstant('{src}\Setup-2.bin'), ExpandConstant('{app}'), '', false, '', ExpandConstant('{tmp}\arc.ini'), ExpandConstant('{app}'), False) then break;

Quote:

Originally Posted by Gamer009 (Post 434584)

works , thnx a lot <3

but please the following question :)

--------------------------------------------

and what about this :

Code:

in the archive.ini



i must type : ISPrecompExtract or ISArcExtract ?



i'm using this line in compressing :mprecomp+srep+delta+lzma:a1:mfbt4:d158m:fb273:mc1 000:lc8



(i think it's a precomp , i'm asking to check

btw, here's my archive.ini

Code:

if not ISPrecompExtract ( 0, 50, ExpandConstant('{src}\Setup-1.bin'), ExpandConstant('{app}'), '', false, '', ExpandConstant('{tmp}\arc.ini'), ExpandConstant('{app}'), False) then break;

if not ShowChangeDiskWindow ('Please Insert Disk 2 To Continue..', ExpandConstant('{src}'),'Setup-2.bin') then break;

if not ISPrecompExtract ( 0, 50, ExpandConstant('{src}\Setup-2.bin'), ExpandConstant('{app}'), '', false, '', ExpandConstant('{tmp}\arc.ini'), ExpandConstant('{app}'), False) then break;

Answer About your Archive:

Code:

From Archive.ini



You must type: ISArcExtract! Not ISPrecompExtract!

(Precomp can't used extract about it! They will together from Arc it! I'm think...)

Can't used about it IsPrecompExtract it!

For Precomp used it:

Code:

if not ShowChangeDiskWindow ('Please Insert Disk To Continue...', ExpandConstant('{src}'),'Data_01.pcf') then break;

if not ISPrecompExtract( 0, 0, ExpandConstant('{src}\Data_01.pcf'),    ExpandConstant('{app}\Data_01.bin'), true) then break;

if not ShowChangeDiskWindow ('Please Insert Disk To Continue...', ExpandConstant('{src}'),'Data_02.pcf') then break;

if not ISPrecompExtract( 0, 0, ExpandConstant('{src}\Data_02.pcf'),    ExpandConstant('{app}\Data_02.bin'), true) then break;

For Arc used it:

Code:

if not ShowChangeDiskWindow ('Please Insert Disk To Continue...', ExpandConstant('{src}'),'Setup-1.bin') then break;

if not ISArcExtract     ( 0, 0, ExpandConstant('{src}\Setup-1.bin'),  ExpandConstant('{app}\'), '', false, '',    ExpandConstant('{tmp}\arc.ini'), ExpandConstant('{app}\'), notPCFonFLY{PCFonFLY}) then break;

if not ShowChangeDiskWindow ('Please Insert Disk To Continue...', ExpandConstant('{src}'),'Setup-2.bin') then break;

if not ISArcExtract     ( 0, 0, ExpandConstant('{src}\Setup-2.bin'),  ExpandConstant('{app}\'), '', false, '',    ExpandConstant('{tmp}\arc.ini'), ExpandConstant('{app}\'), notPCFonFLY{PCFonFLY}) then break;

This the answer!
PS:

Code:

Don't used about the Precomp it!

There have crash your installation's about it!

Quote:

Originally Posted by Carldric Clement (Post 434595)

Code:

Don't used about the Precomp it!

There have crash your installation's about it!

i'm now using the blackBox v1.8

i shouldn't use any compression methods which have "Precomp" ??

Quote:

Originally Posted by Alash Als (Post 434500)

you will find kurutcu compresser in this script......

and i use srep+precomp+lzma:a1:mfbt4:d158m:fb273:mc1000:lc8

and memory is 1700mb and decompression is 1000mb

can you please show me the "compress.bat" opened with notepad++

and how i can set a password for archives "bin" files

Quote:

Originally Posted by Gamer009 (Post 434644)

i'm now using the blackBox v1.8
i shouldn't use any compression methods which have "Precomp" ??

Yeap! They will got like Unsupported Version Precomp it!
Try to use the Srep it! I will helpfully!
:rolleyes::cool: