FileForums - ISO PSX and Breaker Pro

Hi at all,
I've a little question for all of you.

I've got an ISO of 007 Racing[PAL] SLES_03355.
This Iso works fine with ePSXe if you load it through File->Run ISO.
Instead, if you try to mount this image on a Virtual CD like Daemon Tools, and go to File->Run CDROM this game not work properly.

So, I have make some test. If you mount this image with Alcohol 120%, and then go to File->Run CDROM the game starts properly. So...

I see the Light!!!
I've mount this image with Alcohol 120%, then I've made the CloneCD image from this virtual unit.
Then I've mount the new image into Daemon Tools and I've start with ePSXe, using menu File-->Run CDROM. The game works fine.

The problem is with Breaker Pro. I usually use PCSX because it can show a Console Output (very useful).
When I start the 007 Game, even with the virtual unit of alcohol 120% or Daemon Tools, the game starts properly (with the function File->Run CD through BIOS). After reading the SYSTEM.CNF file, it starts the KERNEL SETUP!

With the Breaker Pro, the Kernel Setup starts with this CD. When I swap the CD, it freezes before KERNEL SETUP!

Above, I paste the console output to show you what I mean:

Code:

*PCSX*: CdromLabel: BREAKER PRO

*PCSX*: CdromId: BREAKER PRO



PS-X Realtime Kernel Ver.2.5

Copyright 1993,1994 (C) Sony Computer Entertainment Inc.

KERNEL SETUP!



Configuration : EvCB 0x10 TCB 0x04

System ROM Version 4.1 12/16/97 E

Copyright 1993-1997 (C) Sony Computer Entertainment Inc.

ResetCallback: _96_remove ..

*** Here shows the SONY Logo ***



System Controller ROM Version 98/06/10 c3

SetGraphDebug:level:1,type:0 reverse:0

*** Here shows the License PSX Logo ***



BOOTSTRAP LOADER Type C Ver 2.1 03-JUL-1994

Copyright 1993,1994 (C) Sony Computer Entertainment Inc.

setup file: cdrom:SYSTEM.CNF;1

TCB         00000004

EVENT        00000010

STACK        801FFF00

BOOT =         cdrom:\BREAKER.PRO;1

argument=

KERNEL SETUP!



Configuration : EvCB 0x10 TCB 0x04

boot file : cdrom:\BREAKER.PRO;1

EXEC:PC0(a0010000) T_ADDR(a0010000) T_SIZE(0000d000)

boot address:        a0010000 801fff00

Execute!



S_ADDR(801fff00) S_SIZE()

TYPE : 6 free button or flying-V form

PSX Control PAD Driver Ver 3.0

*** Here shows Breaker Pro Menu ***



TCB        00000004

EVENT        00000010

STACK        801fff00

BOOT =         cdrom:\SLES_033.55;1

argument =

*** Here Breaker Pro freezes ***

So, Breaker Pro freezes after reading the SYSTEM.CNF file. With any other emultator, as PCSX, the game starts properly. After this last "argument = " string, the PCSX execute a new KERNEL SETUP!... With Breaker Pro, it seems this not going on...

This is the situation.

Any idea???