Xecuter 3CE?
 

I installed this mod chip on my box yesterday, I then proceed to start up my box, it beeps, restarts, beeps, restarts, beeps, then shuts down. I was wondering if anybody else experienced this issue or knows how to get it working? I would HIGHLY appreciate help :)

Thanks for reading

Make sure you have your BIOS banks set to the FlashBIOS bank. Without this, the box will simply frag as you describe (as it ships blank). Therefore, you need to flash the chip with a BIOS such as the X3 BIOS from Team Xecuter or a hacked BIOS if you want to play backups. On the front dip switch panel, set the switches on that small panel to:

1 = On
2 = On
3 = Off
4 = Off
Flash Protect (5) = Off

From here, you can either use a disc with the BIOS on to flash, or use Network Mode to flash via Ethernet connection. Check your X3CE install guide for setting the banks to the appropriate sizes for your chosen BIOS.

Hope this helps...

i'm new to this whole xbox thing but i have a question i want to ask.

do you know the best place where can i buy Xecuter3 ? I live in the U.S.

mods4less.com