Ah crap...
 

Well my install went fine.

Turned it on slight buzzing sound, so took back apart and 3 wires had come off, A, SCEX and T.

Fixed A and SCEX. But I think the VIA for T has come off :eek: :mad: BALLS! Wat can i do if anything, im really really really miffed atm.

:( Drat.

Think i've found a fix, hope it works :)

Help, i cant seem to get enough solder on the pin without it bridging any ideas?

(Seaney sed if i followed the via back, i cud solder to the pin its on, which wud be pin 4, will this work?)

HELP!

try cleaning the via with a fiber glass pen then put a small bit of fiux in it and re tin the wire then resolder should have no problems getting it to stick

yeah well follow that also did u buy some tip tinner/cleaner
that works a ok ans solder should stick to that fine.

yeh had tat 4 a while

Why didnt you send it to Lufc or Seaney?

he insisted that he wanted to do it. But i guess its to late now. Jon if u got a digi cam take a pic so we can see whats going on.

Yeah, that's true.

Looks like he'll have to repair that trace...

good luck!

I wanted to send it to LUFC_Fan but he sed he was no longer doing it for postal. Only to local people.

What I did for the pins is apply flux to the wire and the pin. I put some solder on the tip of my soldering iron and dipped the end of the wire in the melted solder. If it is not enough then let the wire dry and dip it again and it will come out thicker. If it has too much you can cut off some of the solid solder from the wire with a wire cutter. Then I dipped the in flux again and place it ontop of the leg. Then I just touch the wire thats against the leg for less than a second and thats it.

I had a simular problem too I accidently pulled on the wire and tore off all of the solder from the SCEX point. I thought I ruined it but luckily I added a lot of solder and got the point on. Everything works fine. So don't loose hope. Good luck. :)

will try that thanks