Can u guyz PLEASE help me out?!
 

Hey there!

Yo, i have Warcraft III but my little bro keeps getting to it and I'm afraid that hes either scratching or getting the CD dirty.
This is affecting the play quality and i fear it may lead to the game not working entirely.

Could you please add a No CD/Fixed EXE file under the Warcraft III RoC section on www.gamecopyworld.com so that i may be able to download the file form the archive and play the game without worry.

Thanx ppl,
Hells_Janitor

Hi Hells_Janitor,

Perhaps you did not look thoroughly, but there is quite a large section for Warcraft 3 and The Frozen Throne expansion pack at gamecopyworld.com. I've used the no CD cracks successfully. Make sure you click on the small "Game Index" link that is directly under the listing of latest games on the home page, and then click on the "W" section of the alphabet. And you will find it. Hope this helps.

Take care. :o)

reply to ure reply
 

Hey man!

Thanx for the reply, but i have dun that and gone thru the W section of the game index. It's not there for me. Could this perhaps be because u r using a different mirror to the one i am? eg: Asia, Europe etc. If so, please tell me what one ure using. I REALLY need that No CD/Fixed EXE file!

Please reply,
Hells_Janitor

Hello again Hells_Janitor,

I have no idea why that would be. I use the North American links. Try these links below.

GameCopyWorld mirror (North American)
http://www.xyra.net/sn/gcw/games/pc_...ft_3_roc.shtml

Megagames
http://www.megagames.com/cracks/html/c905130_0.htm

Gamefix
http://gf.wiretarget.com

Hope this helps.

Take care. :)

Which file is it?
 

Hey!

I got your message, and thanx for helping out. Right now i've got a couple of questions for ya...

1 - The link you gave me to "Megagames", do the same principles of gamecopyworld apply when extracting the file? (extracting in the EXE file of Warcraft III etc.)

2 - The link you gave me to the gamecopyworld file archive of Warcraft III, what was the file called? It may be named differently in this to what I am used to.

and 3 - Would the file be to large to be attached to an e-mail, if not, could you send me the e-mail with the attached file. My address is hells_janitor**********com and the version of Warcraft III is 1.0.0.1 (Whether that means its 1.1 or 1.01 I'm not sure.)

Kind regards,
Hells_Janitor

Hello again,

"1 - The link you gave me to "Megagames", do the same principles of gamecopyworld apply when extracting the file? (extracting in the EXE file of Warcraft III etc.)"

A crack is a crack (no pun intended *lol*), there is nothing specific as to how cracks are installed that you downloaded at gamecopyworld, versus Megagames, versus Gamefix. These web sites do not make the cracks, only host them. Replacing the .exe with the cracked .exe generally is how most no CD cracks work, but not all. Refer to the instructions included with each crack. Generally it is in a .nfo file that you need to open with a text editor such as "Notepad".


"2 - The link you gave me to the gamecopyworld file archive of Warcraft III, what was the file called? It may be named differently in this to what I am used to."

There are many files at that link. The file you need depends on the numerical version of your game.


"and 3 - Would the file be to large to be attached to an e-mail, if not, could you send me the e-mail with the attached file. My address is hells_janitor**********com and the version of Warcraft III is 1.0.0.1 (Whether that means its 1.1 or 1.01 I'm not sure.)"

I do not believe it is necessary for me to do this, nor should it be my responsibilty to do so. I'm sure you are an intelligent person capable of learning. Therefore you are capable of downloading, extracting, and installing the files yourself. If you do not understand how, all you need to do is ask.


What I would do in your case is download and install the Warcraft 3 Reign of Chaos patch version 1.14b from the Blizzard web site.

http://www.blizzard.com/support/?id=mwr0738p

Then goto the Gamefix link I posted in my previous post, scroll down to the "Reign of Chaos" section and download the two cracks for version 1.14b. (Just in case one of them does not work) Extract/uncompress the .rar file(s) with WinRar.

http://www.rarlabs.com/

Open the .nfo file with a text editor and look for the install instructions.

Try your game without the CD in the drive.

If it works, great!

If not, try the other crack.

Take care. :)

Hey man!

Thanx for your help... but i cant seem to access the file that explains how to install the crack :( This is probobly because i dont have the Program that allows you to read it.

Do you think you could post me the link to get/download this program so that i can read it?

Yours truely,
Hells Janitor.

PS - *Take care too man! ;) *

Hey man... Forget my last message,

My patience is wearing thin... I obviously dont have the Programs capable of reading the info cards that tell you how to install the cracks.

You said you had gotten the No CD/Fixed EXE file to work for Warcraft III on Gamecopyworld, So do you think you could just send me the file because i know i have the Programs for gamecopyworld, and i know how to install them Freehand.

The version is 1.4 like you said!

I hope after i get my game backed up we can still be friends...

Please reply with attached file,

Thankyou,
Hells Janitor

Hello again Hells_Janitor,

I can understand your frustration. My apologies if I have spoken/typed beyond your knowledge of windows.

Unfortunately e-mailing you the file will not get you any closer to your goal, as you will still be unable to open the .nfo file to read it. I think that there has been a break down of communications somewhere. Let's see if we can resolve this.

First of all, I'm assuming from your previous posts that you've been able to download and extract/uncompress the crack(s). And that the primary issue is that you are unable to open the .nfo file to read the instructions. (If not let me know where you are stuck/confused.)

If you are running any version of Microsoft Windows, and even Linux for that matter. Then you do have a text editor installed on your operating system by default in the most likely of circumstances. For the following instructions I'm going to assume you are using some version of Microsoft Windows.

By default you will find the windows text editor called "Notepad" in the "Start" menu> "Programs"> "Accessories" folder. If you are unable to find it there, then goto the "Start" menu> then select "Run...", and type in "Notepad" in the "Open" field. Then click on "OK".

Once "Notepad" has been opened, goto the "File" menu within "Notepad", and select "Open...". Browse to the location that you saved the .nfo file. Open the "Files of Type" drop down menu at the bottom, and change it to "All Files". Select the .nfo file, and click on the "Open" button.

Another way of opening .nfo files, and what I find to be easier, is to just right click on the file and select "Rename". Then change the name to "readme.txt" (without the quotes). Then just double left click on the file and it will open in your default text editor program.

I've tried to be as clear as possible in my instructions. But if I have overlooked something that you do not understand, just say so, and I will try again.

Once you are able to read the instructions, then we can move on from there if you get stuck. Don't afraid, or ashamed to ask the dumb questions. *lol* Everyone, was a beginner at somepoint. I hope this helps you.

Take care. :)

Arrgghh! (Please excuse my anger/frustration)

Please man!! I've got it to open but I can't make heads or tails of it!!! Just this once... Forget about the learning! Can you attach the Gamecopyworld version of the No CD/Fixed EXE because I have already used them before and know how to install them etc.

Please...:(

Please Attach file!

Hells_Janitor

Hello Hells_Janitor,

I've given you all the tools and information to get and do what you want. Probably far and beyond what anyone else would have done. It's not like I've asked you to disassemble the origanol executable and figure out how to program your own no CD crack. If you cannot, and are not willing to learn how to download, extract/uncompress, and install a no CD crack. Then you really do not have much business being here. As the no CD cracks are hosted so you can download them yourself, and the forums are here so you can hopefully get the answers you need, help someone out, or find where else to get a crack. Why should I do all the work for you? Then everyone else would want me to e-mail files to them when all the tools and information is already at everyones disposal.

The analogy that comes to mind is if you asked me how to clean your toilet. And I took the time to carefully explain how to do this. But you got frustrated listening to the explaination, and could not, or was not willing to form the proper questions to help you understand the process. So instead you ask me if I could clean your toilet for you because don't want to learn how. If you were in my shoes, would you want to do that?


So without malice, I say again:

Why should I do the work for you?