network xbox - pc
 

Hi,

I am trying to network my xbox to my pc. I have read other posts and tried everything that I have found in them but it still didn't work.
I have the executer2 mod.
My xbox settings are...

IP: 192.168.0.157
Subnet: 255.255.255.0
Default Gateway: 192.168.0.157

My pc tcp/ip settings are...
IP: 192.168.0.1
Subnet: 255.255.255.0
Default Gateway: 192.168.0.157

These are settings that I have found in posts.
Here is a log file of what happens when I try to connect to my xbox.....


WinSock 2.0
Connecting to xbox
Connected to xbox -> IP=192.168.0.157 PORT=21
220 Please enter your login name now.
USER xbox
331 Password required for xbox.
PASS (hidden)
230 User xbox logged in , proceed.
SYST
215 UNIX Type: L8
REST 100
502 rest is not implemented.
This site may not allow file resuming
PWD
257 "/" is current directory
TYPE A
200 Type set to ASCII.
PORT 192,168,0,1,4,17
425 Can't open data connection to 192.168.0.1:4356
Connection lost: xbox

Thankyou for your help.

is ur xbox set on static ip?

yes my xbox is set to static IP.

I thought there may be a problem with my Xbox so I took it where I had it modded. They were able to network to it without a problem. Yet when I try on my pc, I can connect but it says it can't open data connections. Some help would really be appreciated.

I am not sure if it had anything to do with windows 2000 but I have just upgraded to winxp, clean installed.
I again set up my tcp/ip for pc and ip address in xbox as previously advised by Tango87....

"Go into your xbox setting change the Ip settings to:
Static IP: Yes
IP: 192.168.0.157
Subnet:255.255.255.0
Default: 192.168.0.157
SAVE THE SETTINGS!!!
Go to your computers "network connections" -> Properties->TCP/IP Settings
Set them to:
IP:192.168.0.1
Subnet: 255.255.255.0
Default IP: 192.168.0.1

Now turn off your xbox, open Flash FXP, go to quick connect, type in 192.168.0.157 then xbox as the password, turn on your box, then hit connect... that should work for you. try it out."

This time it worked :D

Thanks to Tango87

or u could change the ip address

Your IP 192.168.0.157 is the same as the default gateway. Change the gateway to what ever IP your PC is, i.e 192.168.0.1 and make sure Static IP is enabled in the evox.ini.

No need to change any IP address now.
It's all working perfectly the way I set it up before.
Thanks anyway.