Ps1 soldering tips
 

can someone give me some ps1 soldering tips please

Thanks
Seaneyb2003!

- Practice on some scrap boards with soldering to the sides of micro capacitors. See how easy they come off if you use too much solder or hold the iron too long.

- Use wire wrap ( laminated wire ) Easier to work with. Get a bit of solder on your tip, touch it to the end of the laminated wire for a second, it should bond and melt the coating off the end. Wire is ready.

- You can prime the spot on the board with a tiny bit of flux, I don’t bother. I just get a fresh bead of rosin core solder on my tip, knock the excess off and touch the spot for a split second.

- Knock any excess solder off your iron tip and touch the tip of wire you prepared to the spot on the board you prepared, then touch the iron over the wire for a split second and connection should be bonded. I give a tiny tug on the wire to make sure.

do u know where to get a soldering kit this inc everything i need plus this is my first ever time i will be chipping a playstation but i have soldered befofe where can i get a mod chip from ive seen lots of em but which place is best to get em any ideas

When I briefly looked into soldering myself, dust2dust game me a good bit of advice. Get hold of an old PC modem or something similar. Start off soldering to the larger points, then work you way onto the smaller points. Practice, practice, then practice some more. When you have finished, practice again.

:)

right i think this is ok im getting a

18 w antex soldering iron
Fluxed solder
0.10 mm soldering nib
pre soldered wired mod chip

Does this sound ok for installing a mod chip onto a 9002 model im getting the mod chip form kanection.co.uk

if i need anything else please tell me :)

will i need a de soldering braid?