i need serious help....
 

Ok... i burnt evoX and booted it up to the xbox.... everything works ok... i chose sys. utils then flash bios.... there was to option... one with somehting like "evox" and the other one has "evox eject fix" (something like that). then it says flashing bios... when its done it says turning of system now... then it turned off... from there on i cant seem to boot evox anymore.. plz help. thnax

What modchip were you using? If it isn't evo-x certified, then you just f'ed up your chip.

Oh, and there is always the possibility of a bad flash.

other back up games still works... so i dont think i messed up my chip...

But bad flash, how would i fix it?

and i do not recall what chip i have.... sorrie

well, if your backups still work, then your probably right that your modchip isn't messed up.

As for a bad flash....It depends on your chip. X2 lite, a bad flash is not fixable. If you have the matrix/xodus modchip or X2 Pro, then it is possible to re-flash the chip with your PC. It depends if the chip has protections against it or not. Which is why I asked what chip you had.

Also, is it booting to a dashboard, or is it just games that are working?

its booting up into the normal microsoft dash board

well, just re-install the evoX dashboard.

evoX cdrw doesnt boot up anymore.... it pops into the ms dashboard and it gave an window saying that xbox does not recognize the disc.

i think i either have the apple x mod chip or the xecuter

does your xbox play any of your backups? If not, then I don't think the chip is working. If your modchip was flashed wrong, your xbox could be booting to the normal xbox bios.

I don't think the apple X is flashable through evoX, but the apple X-2 is. X-ecuter is not, but x-ecuter Lit/Pro are.

So, if you have the Apple 1/v1.1 or x-ecuter, then your probably screwed.

If you have the Apple-X2, or X-ecuter 2, your probably fine.

its playing alll my backups, execpt for evox.
i got the xbox media player working also..

you posted as I was editing, nevermind the extra stuff there.

Well, you will either have to put a dummy file on the evolutionX cd/dvd, or put evolutionX on boXplorer and do it that way.

putting evox in boxexplorer?
yea... omg... i just had boxplorer working a sec ago... why did i reset....!!! GRRR... so how do i put evox in boxexplorer

You have to burn evolution X in a folder on the same CD as boXplorer, if you want to use it to put evolutionX on.

Before you do though, check to see if you already have it on your HDD. You can see if the evolutionX dashboard is already on your xbox with it boxplorer. Just load it up and if your not on the C drive already, press stat and choose it.

Look for a file like "evoxdash.xbe" or something like that. If it's there, then you already have it. Just rename the xboxdash.xbe to msxboxdash.xbe and the evoxdash.xbe to xboxdash.xbe. I dunno how well you know that program, but I'm going to give the basic controls that you'd need.

thanks no evoxdash.xbe