FileForums

FileForums (https://fileforums.com/index.php)
-   PS2 Games (https://fileforums.com/forumdisplay.php?f=19)
-   -   Question for Charlie (https://fileforums.com/showthread.php?t=42407)

Jackel777 19-12-2002 20:28

Question for Charlie
 
I just installed a Magic 3 on my V7 PS2 (brand new). The problem is it will not boot any DVD media not movies, not PS2 games (original or Backups). It boots CD-R based games (original and backups) and PS1 games (original and backups) perfectly. I know it’s not the media since it will not boot original DVD based games and I can play my DVD-R backups on my other machine with a Magic 2. When you insert a DVD (game or movie) all you hear is a clicking sound, after a while it just stops and nothing happens (not red screen or anything). I tried adjusting the laser, but nothing happens and the truth is I don’t know anything about adjusting laser, I turned the little silver screw that reads “DVD” on the bottom of it like 2 whole times little by little and checking to see if it would read the DVDs and nothing then I did the same turning it the opposite way and still nothing. Do you think it could be on the motherboard, if so why would it load CD based games and not DVD based games?

dust2dust 20-12-2002 07:12

did it load dvd origanals before chip? and films?
my guess is yes then its a install fault (or bad chip)but i guess at the install

put laser setting back to were it was i hope u marked it
then check double check your install

Jackel777 20-12-2002 09:34

It did load DVDs before I install the chip.
So you think it might be something with the motherboard and not the laser?
I'm going to recheck everything and see what happens.

charlie_ps2 20-12-2002 13:52

Look at the install. Paricularly wire E but generally look for a solder ball behind the pins on the CD/DVD Controller or the BIOS.

When you turn the Messiah 2 off, do original DVDs boot?

xim2 20-12-2002 20:54

LOOOOL CHARLIE THE GUY HAS A MAGIC 3 and there is not wire "E" this chip !!! :D :D

Jay_83 21-12-2002 02:50

Quote:

Originally posted by xim2
LOOOOL CHARLIE THE GUY HAS A MAGIC 3 and there is not wire "E" this chip !!! :D :D
If you read charlie's post it refers to messiah 2 (It even says that)
No need to laugh at the geezer! :p

He's a busy guy!!!! :D

charlie_ps2 21-12-2002 02:59

I should have said:

Lokk at the install. particularly wire W but generally look for a solder ball behind the pins on the CD/DVD Controller or the BIOS.

When you turn the Magic 3 off, do original DVDs boot?

xim2 21-12-2002 10:26

I didn't know "CHARLIE" had a PITBULL named JAY_83 :D :p :D

Jay_83 21-12-2002 10:32

Quote:

Originally posted by xim2
I didn't know "CHARLIE" had a PITBULL named JAY_83 :D :p :D

Grrrrrrrrrrrrrrrrrr! :mad:

charlie_ps2 21-12-2002 17:44

Quote:

Originally posted by xim2
I didn't know "CHARLIE" had a PITBULL named JAY_83 :D :p :D
Jay_83 called me a 'geezer'. Some Pitbull.


All times are GMT -7. The time now is 18:33.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
FileForums @ https://fileforums.com