no solder mod chip lamer than fu*!ing steven Q Urkel!
 

damn this shit SUX i have tried every boot method listed on site here. and none work. jak and daxter burnt onto some cheap ass silver cdr it is under 600 megs so i knwo that isnt the problem. i burnt it at low speed liek the cdrwin tutorial said to. i am runnign a no solder lik sang pnp mod on a spch 30006-r and nomatter what method i try it freezes i tried dave mira i tried makign a dummy dvd code entry like stalker said and i tried the orginal way of single swap is it the game shark or what?

I have the No Solder v5 and it works perfectly if you use this method....


This was posted by "villasgeo" in a different forum

To all of you that trying the dave mirra trick with the new AR2 V2.1 (new v) and it Doesn’t work .
I will explain what I done:
1. create a new entry in the code list and call this game code "DVD-R"
2. create an empty code entry in this "DVD-R" game code and call this entry "dummy-code"
3. Boot the ps2 with the AR2, then swap (just regular eject) the AR2 disc with a DVD original larger then the DVDR you trying to boot and wait 20 sec.
4. chose AR codes from the main menu and turn on or off this "dummy-code" before you start the game .
5. chose start game-with codes and press X then it says updating code list and in this exact time press the eject for 2 sec for open the tray with the r-mod chip and swap the original DVD with the DVD-r.
Good luck





Hope it works for you too

turns out it is all my fualt for not reading enough i guess. i read that no solder supports dvdr so i bout it thinking it meant dvd rip. but little did i know i guess it means dvd EXACT COPIES ONTO DVD media not a dvd ripped and hacked and mangled and tossed onto a cdr hehe am i correct? please lemme know

it WILL boot dvd rips too as long as there under 640 megs.

my chip lets me play the dvd rip of spiderman the movie, but gta3 didnt work

grrrrr
 

I just cannot get anything to work. I have tried tekken tag
(cd rom game) ICO (cd rom) and dvd rip of jack and daxter. noen worked. all were under the size they should be. I got no clue what is wrong. I dont think it is my mod chip because when i hold eject at swap time it works and it closes after 5 secs liek it suppose to so that is all the mod chip is needed for. hmmm no clue

Maybe it is your gameshark or action replay I had a gameshark mess up on me got a new one all ok just a thought I would although think you have tried everything and it my be your chip. Just my 2 cents good luck.

Re: grrrrr
 

What type of Media are you using to burn with... The PS2 can be a little bitchy with cheaper media sometimes.....One last thing, if you can, junk the no-solder mod and get the MESSIAH!!!!!!:cool: