need help disc tray will not open
 

What does it mean after the messiah was installed, and the disk tray will not open. I need help very fast here anyone. It is an ntsc ver 4 system. Some points in the board were different, than the diagrams, than on my system.

I know the system is a ver 4 the serial is U305xxxx, date code 1A

NEED HELP FAST

I don't know much about ps2's but what I'm thinking is that when your ps2 was taken apart the eject/reset button thingy on the top cover was damaged

Check the ribbon cable that goes from the eject/power button assembly to the Motherboard is securely in place and that it is the right way around, and that the clip over it is pressed down.

Inspect the cable to see if it is damaged

Check to see if the DVD tray is unobscured so that indeed can open.

It does not sound too good that your board is different than the drawings - all V4 boards are identical to the drawings - if not you do not have a compatible V4.

I can see from your post that the serial etc. points to a V4 - but is your bios a gap or non-gap one ?? if it is a non-gap the Messiah will not work...also did you overheat any of the components while soldering the connections ??

Buffet