Yamaha 8/8/24 Driver seeks for WinMe
 

I have puffer problem in WInME at bigger than 5x writing speed. Is any body has a solution to solve this problem?
The writer is master the Cd-Rom is another ide chain!

Here's the recommended connection method for IDE burning:

Primary IDE port: master = Hard drive (c:\)
slave = free or extra hard-drive

Secondary IDE port: master = cd-rom
slave = cd-writer

Make sure your BIOS searches for all your drives and correctly configures them, ie mode 3,4 etc.

Also, you'll need to make sure that you enable DMA in Windows (if your drives are fairly modern). WIndows disables this as a safety precaution. Also disable auto-insertion notification as thus can be a real nag sometimes when you're inserting disks.

Hope this helps out a bit. Let us know if you have any success.

Bye ~