Help needed in booting ip DVD-R?
 

could someone Please tell me how to boot up a dvd-r with a neo 2.2 and ar2 v2 ive tried loads of different ways but no joy.

any help would be great cheers

hhmmm i can tell u basics c if u r on right line
boot up ar(i know 1.7 works for sure)
put in origanl dvd game (large toc size backup must b smaller toc size)
then swap for back up
not alot help i know but have looked all known sites with info r down
lucky me i boot anything no method

PAL PS2 Consoles DVDr Booting Method


We can confirm that all NEO2.x owners using an AR2
v1.7 / 1.9 on a PAL console can boot DVDR games
with a double swap with no patches and no problems

1) Turn on the ps2 with AR2 1.7 (holding down the
ON/RESET)
2) Select Start Game (Still Holding ON/RESET)
3) Press EJECT (while still holding the ON/RESET
button) and swap AR21.7 with DVD original
4) Press EJECT to close (Wait 10 seconds)
5) Then select WITHOUT CODES. Wait until disc stops
6) Now let go of reset and the tray comes out, Swap
DVD original for a backup DVDR press X
just as the tray starts to go back in (IMPORTANT)


NTSC USA PS2 Consoles DVDr Booting Method


We can confirm that all NEO2.x owners using an GS2
v1.7 / 1.9 on a USA NTSC console can boot DVDR games
with a double swap with no patches and no problems

1) Turn on the PS2 with GS2 / AR2 V1.7 or 1.9 (holding
down the ON/RESET)
2) Select Start Game (Still Holding ON/Reset)
3) Press EJECT (while still holding the ON/RESET
button) and swap GS2/AR2 with Boot DVD
4) Press EJECT to close (Wait 10 seconds)
5) Then select WITHOUT CODES. Wait until disc stops
6) Now let go of reset and the tray comes out, Swap
Boot DVD for a backup DVDR press X just
as the tray starts to go back in (IMPORTANT)



JAP PS2 DVDR Booting Method


You need DOA2 original JAP DVD game and Neo 2.2 jap
version intalled

Insert original DVD

When playstation logo appears press reset when it
reboots should eject, although some times takes
a few attempts

Insert backup n play

Never mind the "power of the Playstation".

What about the "power of the Forum"?!

Is the Forum with you or what - where other forums have gone to ludwig this Forum gathers strength. AshestoAshes (he's not a member yet) and Dust2Dust (he is) DAL SIMply no better forum, NightstalkerNightstalker.

I have a question regarding the AR2 then...

I have the AR2v2 together with the NEO2.5DVD-R. Okay, I understand I wont be able to boot DVD-R's unless I use the 1.9 or 1.7. But, I could not find the 1.7/1.9 at all. Can I just download an image of the 1.9/1.7 from the net, burn it and use it? will the PS2 accept it? or I need to get an original disk? or it is related to the AR2 card itself?

Can I use RegionX in order to boot DVD-R's?

Thanks,

Oren M.

:)

maybe i better get ashs2ashs to jion
hes my c&c tiberiansun gaming partner
anyone here play it online
my nicknames r
dust4dust
inthechit
unxpectd
apain2u
maybe i can kick your butts online
:)

hi sorry posted my reply as u posted your question
i not sure
to easy for me i got a messiah
but i shell search for u c what i can find
but i make no promises

i guess u tried the above with v2?

DONT KNOW ON THE AR2 v2 M8,HAS TO BE AR2 TO BOOT DVDR
BECAUSE OF SWAPS REGION X DOESNT HAVE ANY SWAP POINTS

No you need GS2/1.9 ot AR2/1.7

I've not got the URL immediately to hand but if you search the Forum on PrimoDVD, one of my posts contains a URL with the word PACIFIC in ite. That's got those downloads for you to burn with CDRWin.

You boot AR2/1.7 as a backup behind AR2/1.x or DVDR-X for that matter!

Thanks much Charlie!
I got da site and currently downloading the AR1.7.

Just to make sure I understand it properly, after I burn the AR17 image on a CD, I should load it using my AR2v2 just as I load a regular CD backup, and then use it to swap DVD-R?

Thanks again,

OM.

Thanks much Charlie!
I got da site and currently downloading the AR1.7.

Just to make sure I understand it properly, after I burn the AR17 image on a CD, I should load it using my AR2v2 just as I load a regular CD backup, and then use it to swap DVD-R?

Thanks again,

OM.

Thanks much Charlie!
I got da site and currently downloading the AR1.7.

Just to make sure I understand it properly, after I burn the AR17 image on a CD, I should load it using my AR2v2 just as I load a regular CD backup, and then use it to swap DVD-R?

Thanks again,

OM.

Thanks much Charlie!
I got da site and currently downloading the AR1.7.

Just to make sure I understand it properly, after I burn the AR17 image on a CD, I should load it using my AR2v2 just as I load a regular CD backup, and then use it to swap DVD-R?

Thanks again,

OM.