FileForums - DEADLIGHT DVD5 Installer Inno + Freearc

FileForums (https://fileforums.com/index.php)

- PC Games - CD/DVD Conversions (https://fileforums.com/forumdisplay.php?f=39)

- - DEADLIGHT DVD5 Installer Inno + Freearc (https://fileforums.com/showthread.php?t=93599)

senseman

26-10-2012 06:54

DEADLIGHT DVD5 Installer Inno + Freearc

1 Attachment(s)

DEADLIGHT DVD5 Installer Inno + Freearc

Source: YENER90

1: Install the game and install the PATCH 1.1

2: FreeArc need to be installed on your system

3: Download attachment extract completely (wherever you want)

4: Go to install directory....move redist folder to DEADLIGHT

5: Go to install directory,run FreeArc,compress the following files

Code:

all files and folders

        

Output archive: Data1.cab

Compression: No compression: -m0

Make exe: Not checked

6: Now Move Data1.cab to Deadlight folder

7: Burn or Make iso content with any label

Fabioddq

26-10-2012 08:35

Hi senseman, Works in win7 64Bit. Thanks!

By the way, you don't have a fix for unlock 30FPS to 60FPS? :D

mikey26

26-10-2012 08:49

hi Fabioddq from what i have been checking on the net u can unlock the fps in the ini file in the game dir.dont have game yet to make sure.

senseman

26-10-2012 09:04

Quote:

Originally Posted by Fabioddq (Post 408925)

Hi senseman, Works in win7 64Bit. Thanks!

By the way, you don't have a fix for unlock 30FPS to 60FPS? :D

try this :D

Code:

http://www.evga.com/forums/tm.aspx?m=1776103

Fabioddq

26-10-2012 10:45

Quote:

Originally Posted by senseman (Post 408928)

try this :D

Code:

http://www.evga.com/forums/tm.aspx?m=1776103

That's what I needed! Now it's very better with 60FPS! Thanks! :D

Instructions in this link above:

To remove the 30fps Frame Cap

Browse to \My Documents\My Games\UnrealEngine3\LOTDGame\Config\LOTDEngine.ini
Find MaxSmoothedFrameRate=30 (there are two MasSmoothFrameRate)
Change the value to whatever you want!

pakrat2k2

26-10-2012 12:25

senseman, any way to integrate the 30fps fix into the installer ? So that you dont need to change that value everytime you want to play the game ???

PS Nice job on conversion btw !

mikey26

26-10-2012 12:46

just change is manually and then just recompile the game so when u install it will install it with the fps fix :-)

senseman

26-10-2012 13:54

Working on it

pakrat2k2

26-10-2012 14:29

Quote:

Originally Posted by mikey26 (Post 408945)

just change is manually and then just recompile the game so when u install it will install it with the fps fix :-)

the 'fix' has NOTHING to do with game files..
its in \My Documents\My Games\UnrealEngine3
\LOTDGame\Config\LOTDEngine.ini

which is different for every person dependant on OS.

senseman

26-10-2012 14:48

new Attached Files added incl fps fix...test and report back

pakrat2k2

26-10-2012 19:55

worked fine BUT the white text on tan background ( screenshots 3 / 4 ) are very hard to read... will have to change it to something more readable ? thanks for posting fix.

Betoxr1

26-10-2012 21:36

hi, I'm new... I try to do this convertion , the conversion goes well, but when I install the game in Spanish and start, the game is in English .. not Spanish. :(

pakrat2k2

26-10-2012 21:53

Quote:

Originally Posted by Betoxr1 (Post 408976)

hi, I'm new... I try to do this convertion , the conversion goes well, but when I install the game in Spanish and start, the game is in English .. not Spanish. :(

english audio, spanish subs ( which needs to be enabled ingame. ) According to steam community there is NO spanish audio ( voice ) JUST subs!

Betoxr1

26-10-2012 22:10

I install the game again and then do the conversion, choose Spanish .. the game is installed correctly ... Start the game and in-game texts, menus and subtitles are in Spanish and English voices ... not change anything in the game to bring in Spanish ... Then I installed the game with the conversion, it ends, I make the ISO and install the game again, start the game and texts, subtitles are in English. What could be wrong?

pakrat2k2

26-10-2012 22:36

missing some reg entry for language

Betoxr1

26-10-2012 22:40

Quote:

Originally Posted by pakrat2k2 (Post 408982)

missing some reg entry for language

Thanks for your patience! .. You know how you fix this problem? :o

Fabioddq

26-10-2012 22:40

This is the codes for languages:

English: $00000001
French: $00000002
German: $00000003
Italian: $00000004
Spanish: $00000005

EDIT...

Follow the instructions by pakrat below... :D

pakrat2k2

26-10-2012 22:47

just use this code below to fix temporarily, until new script is corrected

Code:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\TequilaWorks\Deadlight]

"installdir"="C:\\Program Files (x86)\\Deadlight\\"

"language"=dword:00000001

Just change the 001 to 005 & save the file, rename to extension to reg & import it. Oh & correct install dir too, IF yours doesnt match.
make sure the \\ are there as its a reg file.

Betoxr1

26-10-2012 22:58

Quote:

Originally Posted by pakrat2k2 (Post 408985)

just use this code below to fix temporarily, until new script is corrected

Code:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\TequilaWorks\Deadlight]

"installdir"="C:\\Program Files (x86)\\Deadlight\\"

"language"=dword:00000001

Just change the 001 to 005 & save the file, rename to extension to reg & import it. Oh & correct install dir too, IF yours doesnt match.
make sure the \\ are there as its a reg file.

Thank you guys! WORKS ... I Will wait the fix:D

senseman

27-10-2012 16:27

Fixed reg entries for all languages,Apologies for the delay ( thanks to pakrat for helping to =))

Maxgrilo

27-10-2012 17:03

Here the game is only 3.7GB or DVD5.

Betoxr1

27-10-2012 17:11

Quote:

Originally Posted by senseman (Post 409006)

Fixed reg entries for all languages,Apologies for the delay ( thanks to pakrat for helping to =))

Thanks!!.. Can compress much more the game? .. :D

pakrat2k2

27-10-2012 17:33

you can change the compression from -m0 to something more BUT it will take longer to uncompress the file.

elbubi

27-10-2012 19:05

Thanks for the effort put in this conversion senseman! Tested under w7x64 spanish, worked perfectly!

With compresion set to "ultra" it goes up to 2957mb.

Kind regards!

Ps: Fps-cap fix didn't worked for me, before executing the game for first time the value was set to "60", but after entering the game it reseted back to "30", changing it manually did the job. Kind Regards!

REV0	28-10-2012 02:13

Quote:

Originally Posted by elbubi (Post 409018)

Thanks for the effort put in this conversion senseman! Tested under w7x64 spanish, worked perfectly!

With compresion set to "ultra" it goes up to 2957mb.

Kind regards!

Ps: Fps-cap fix didn't worked for me, before executing the game for first time the value was set to "60", but after entering the game it reseted back de "30", changing it manually did the job. Kind Regards!

Go to Conversion/Deadlight folder and set ini file as read-only, re-compile

elbubi

28-10-2012 06:51

Thanks REV0! I found and alternative way though: editing "Deadlight\LOTDGame\Config\LOTDEngine.ini" with correct parameter (60) before conversion, since I guess it's the source file it uses to generate the one in "Documents\MyGames".

Kind Regards as always!

REV0	28-10-2012 08:03

Quote:

Originally Posted by elbubi (Post 409042)

Uhm, you were suppose to edit it first, you were suppose to edit it and put the ini file in Deadlight folder, and set it's attributes as 'read only' so game will not overwrite it. It should be fine i suppose.

Cheers

elbubi

28-10-2012 14:52

You are 100% correct. The way I mentioned worked becuse uninstaller left the unrealengine folder untouched, so when I installed it again it took the value from there, but it does not work with a clean install, so no, that method I mentioned does not work either.

Thanks once again.

Betoxr1

30-10-2012 09:11

There is a game update that fixes the frames ...

senseman

30-10-2012 10:08

UPDATE

- Removed fps fix
- Added Patch 1.0 support

- The limitation to 30 FPS has been changed and now the game is running at 60 FPS.

Changelog

Code:

http://store.steampowered.com/news/9230/

coccolino_dbro

30-10-2012 12:46

Quote:

Originally Posted by pakrat2k2 (Post 408972)

worked fine BUT the white text on tan background ( screenshots 3 / 4 ) are very hard to read... will have to change it to something more readable ? thanks for posting fix.

Thanks for the awesome work, but I share the above opinion also (not only for this game's conversion)... This is just an idea, but the small progress window's background should be a solid color or a very faint and washed-out image, to make the text as readable as possible...

pakrat2k2

30-10-2012 16:32

Quote:

Originally Posted by senseman (Post 409148)

UPDATE

- Removed fps fix
- Added Patch 1.0 support

- The limitation to 30 FPS has been changed and now the game is running at 60 FPS.

Changelog

Code:

http://store.steampowered.com/news/9230/

Thanks for the update info, and just to keep it straight for others use a version number in future uploads. ( start with V1.0 & any update/fix for script upload new file with corrected V#)

nene777

01-11-2012 03:47

It works perfect, but the conversion is already recorded 1.0 crack and update it?

stlkelvin

02-11-2012 06:04

Go to install directory,run FreeArc,compress the following files

i already run FreeArc, then how?

i confused

senseman

02-11-2012 07:43

2 Attachment(s)

Quote:

Originally Posted by pakrat2k2 (Post 409179)

Thanks for the update info, and just to keep it straight for others use a version number in future uploads. ( start with V1.0 & any update/fix for script upload new file with corrected V#)

OK.

Quote:

Originally Posted by nene777 (Post 409264)

It works perfect, but the conversion is already recorded 1.0 crack and update it?

yes

Quote:

Originally Posted by stlkelvin (Post 409341)

Go to install directory,run FreeArc,compress the following files i already run FreeArc, then how? i confused

Xaelin

21-11-2012 05:09

Thanks. Works fine but i cant install vcredist silent mode.

Code:

LaunchArg2=/silent



LaunchArg3=/silent

http://img694.imageshack.us/img694/1378/error1ac.png

http://img210.imageshack.us/img210/6468/error2ia.png

REV0	21-11-2012 05:31

Quote:

Originally Posted by Xaelin (Post 410460)

Thanks. Works fine but i cant install vcredist silent mode.

Code:

LaunchArg2=/silent



LaunchArg3=/silent

It says you already have newer version of VC, so there's no point on installing older one. Just ignore it

-VC'nin yeni sürümü olduğundan eskisini yüklemeye gerek yok diyor

Xaelin

21-11-2012 06:10

Quote:

Originally Posted by REV0 (Post 410463)

It says you already have newer version of VC, so there's no point on installing older one. Just ignore it

Thanks a lot.
I fixed with "/quite" tag for twice :)

All times are GMT -7. The time now is 12:20.