Tom Clancy's H.A.W.X. 2 (DVD9 to 1x DVD5) *Multi 6*
 

Tom Clancy's H.A.W.X. 2 (DVD9 to 1x DVD5) *Multi 6* *1 LANGUAGE*

1) Install the game from DVD9

2) Extract 'HAWX2_1xDVD5.7z.001...HAWX2_1xDVD5.7z.011' archives contents

3) Copy DVD9 contents to 'HAWX2_1xDVD5\HAWX2' folder

4) Launch Repack.bat, select your language & wait...

5) Burn or mount ISO in 'HAWX2_1xDVD5' folder

Note: Credits video will be replaced with fake one.

Rename the files:
HAWX2_1xDVD5.7z.009.7z -> HAWX2_1xDVD5.7z.009
HAWX2_1xDVD5.7z.010.7z -> HAWX2_1xDVD5.7z.010
HAWX2_1xDVD5.7z.011.7z -> HAWX2_1xDVD5.7z.011

@EMPiRE
WTF? Valid file extensions are only 001...008, remove this limitation!:mad:

Tom Clancy's H.A.W.X. 2
(DVD9 to 1x DVD5) *Multi 6* *1 LANGUAGE* *Update v1.01 Slipstreaming*

1) Install the game from DVD9

2) Extract 'HAWX2_1xDVD5.7z.001...HAWX2_1xDVD5.7z.011' archives contents

3) Extract 'HAWX2_1xDVD5_v1.01.7z to the same location and then overwrite the contents

4) Copy DVD9 contents to 'HAWX2_1xDVD5\HAWX2' folder

5) Launch Repack.bat, select your language & wait...

6) Burn or mount ISO in 'HAWX2_1xDVD5' folder

Thanks Peterf1999 work perfectly on win7 x64.
Buone feste a tutti!

Tested in Spanish and, as always, working 100%.

Ps: You have accomplished what others said that was "imposible". Congrats!!! :)

it works perfectly, IF you follow the instructions.. use 7-zip to open the files, winrar causes errors.

here's your clue ! --> FreeArc 0.666 creating archive: .\HAWX2\HAWX2_arc.exe

Does that look like this c:\program files\HAWX2? Obviously not.

First off DO NOT extract the 7-zip files into your game dir.
Second make sure the 'temp' folder HD has tons of space. +20GB freespace. by temp folder I mean the drive where the 'HAWX2_1xDVD5\HAWX2' folder is.

Third if anytime you get any errors, delete the temp folder, start over again, from the first step.

thanks!! i speak english just a little, i don't understand all instructions.
can you plz make a video ? thanks in advance =)

or can u explain more this step plz

3) Copy DVD9 contents to 'HAWX2_1xDVD5\HAWX2' folder

i can't extrat 7-zip can't open archive why??? plss help

make sure you rename the following files, without the .7z extension:

HAWX2_1xDVD5.7z.009.7z
HAWX2_1xDVD5.7z.010.7z
HAWX2_1xDVD5.7z.011.7z

The first 8 files DONT have that extension. Just a limit of the board to 8 files, peter had to rename them to finish the full set.

What does it mean to '3) Copy DVD9 contents to 'HAWX2_1xDVD5\HAWX2' folder'?
Where do I find these contents?

I followed the steps pakrat2k2 said and have about 25GB in my hdd for the 'temp' folder and 7+GB for my game dir, but still FreeArc is asking me to retry.

The dvd9 contents are what you installed the game from!

The downloads in post #1 HAWX2_1xDVD5.7z.01 --> HAWX2_1xDVD5.7z.011 will give you the 'HAWX2_1xDVD5\HAWX2' folder once you extract the files from those 11 files. Then follow the rest of the instructions.

iam getting the same error trying to rebuild..what should i do...please help

more information would definately help..

what error message? What OS are you running?

IF running Win7 right-click on bat file & run as admin. ( for starters )

hello need some help here guys, how do i Rename the files:
HAWX2_1xDVD5.7z.009.7z -> HAWX2_1xDVD5.7z.009
HAWX2_1xDVD5.7z.010.7z -> HAWX2_1xDVD5.7z.010
HAWX2_1xDVD5.7z.011.7z -> HAWX2_1xDVD5.7z.011
coz everytime i right click on them and rename - when i try extract them it always fail and you still see the .7z at the end of the file name, i tried everything and im in dire need to get this game to work coz i jus finished hawx 1
Pleeeeeaaaseeeeee help

Get a file manager (FAR Manager or Total Commander), select all the files and rename them to "*." (an asterisk and a dot); this will cut the (last) extension off the file name. Or open a DOS prompt, go to the directory of these files and run the command "ren *.7z *.". (The quotes are not to be entered.)

How game is working when crack is not relased yet, is this only conversion to 2xdvd5 or full game wich will working with that conversion?

the conversion works perfectly as a backup to the original media, and it doesnt need a crack... I OWN the original game....

Is The DVD9 contents wich i need to copy in folder HAWX2_1xDVD5, is is the contents of install dir or from original DVD9?

I have problem with conversion. When i run REPACK.bat, on the end of conversion he said ERROR: Could not open CAB file: F:\HAWX 2 install\HAWX2_1xDVD5\HAWX2\data1.cab
The system can't find the file specified.

Adding resampled biks and dummy files, please wait...
ERROR: Could not open CAB file: 'F:\HAWX2_1xDVD5\HAWX2\data1.cab
The system cannot find file specified.


ANYONE KNOW WHAT IS THE PROBLEM :(

P.S. When i Copying files form installation dir to HAWX2_1xDVD5 do i need to overwrite all files or not?And wich is the size of the iso file on the end of conversion?

To help you explained, i have done this:
1. I'm installed the game
2. I download and extracted files from 7z archives
3. I copy from games installation dir all files to HAWX2_1xDVD5\HAWX2' folder and overwrite all
4. I launched REPACK.bat, select English language and hit enter, then he asked me where is the game, i put him right place of HAWX2_1xDVD5\HAWX2 folder and hit enter
6. He starts to compresing files and finsh all, and then I got a ERROR MESSAGE:

Could not open CAB file: F:\HAWX2 install\HAWX2_1xDVD5\HAWX2\data1.cab
The system can't find the file specified.

And next ERROR:

Adding resampled biks and dummy files, please wait...
ERROR: Coul not open CAB file: ' F:\HAWX2_1xDVD5\HAWX2\data1.cab
The system cannot find the specified

you copied from WRONG location...

3) Copy DVD9 contents to 'HAWX2_1xDVD5\HAWX2' folder

pakrat2k2 Now i have secon problem i do all of that, and when i lounch REPACK.bat, chose my language, and put right place of conversion he said me this:


FreeArc 0.666 creating archive: .\HAWX2\HAWX2_arc.exe
WARNING: no files, erasing empty archive
There were 1 warning(s)

WARNING: FreeArc returns an error, please retry...

1.I must say that I enter a good location of my conversion
2.I have a lot of space on my hdd
So I don't know what is the problem right now :(

You must type game folder path (e.g. c:\program files\Hawx2) and not the conversion path :D

People, when you install the game, and run icon of HAWX 2, how you pass firs window where you need to put username and password and to login on server, he asked me there a serial number. How can i play this game, without that?

Hi Peter,

I've been going through some of your scripts that have those really cool slideshows. However, they're buried in between all this code, and I'm not sure which parts of the script are only for the slideshows. Is there any way you could separate out the part of one of your scripts that I could paste into any of my scripts to add the slideshow functionality?

Finally is this game working, I mean can we play this game after this conversion or we need some crack wich is not relased yet, in my earlier posts i said that i run game and new window shows wich need username and password to login. So i now dont understand is this just a conversion to dvd5 or his is full game wich i can play without internet conection?

for the last time... its just a conversion from dvd9 to 1xdvd5. you need original game cdkey to be able to play it. period. there is no crack for it.

use the witcher 2 ISS script and go thru the script the parts for the slideshow are fairly easy to spot. if you need help just PM

Here is about as far as I've gotten, comments included in the code. Thanks pakrat (and Peter) if you can help!

HAWX renaming the files
 

Thanks Jody will try this as soon as i get home....downloading file commander now, ill let you know how it went by tommorow:cool:

Thanks peter! English audio with Spanish subs, working great!

Before making this conversion, update to patch 1.01 and its set for crack released yesterday.

sorry, after I downloaded the attachment (HAWX2_1xDVD5.7z.011), I can't extract it because it gives an error. I tried with 7zip, winrar, freearc and winzip, but all with an error.
can you control this file please?
thanx

worked perfectly fine here, its on your end. try newest version of 7-zip / winrar

use this Application

http://www.hjsplit.org/windows/

When i completed compression my iso file have 5.18gb. I do not why because i do like you write. Anybody have same problem?

dont need to use hjsplit, use latest version of 7-zip, they extract perfectly fine.

I did pakrat,I use winrar 4.20 64 bit , 7zip 64bit not working for me :confused: tried to HJ split worked flawlessly for me

Hi Peter! Is there any way to slip update 1.01 inside 1xdvd5? Tested a few things but can't manage to make it fit.

Kind regards and sorry for being always such a PITA :D

7-zip 9.25 X64 working perfectly fine here

interesting...Today I tried again and it worked flawlessly 7zip... whatever 7zip and hj split works %100 :D