The Godfather 2 DVD9 to 2xDVD5
 

Make new folder Disk 1 and Disk 2

1. Copy all files and folders to Disk 1

2. Download Attachment 1745 and extract the file "autorun.rar" to extract the file "autorun.dat"

3. Replace the original "autorun.dat" with this edited "autorun.dat".

4. Move the following files and folder to Disk 2.


5. Copy the files and folders from Disk 1 to Disk 2


6. Disk 1 should only contains this files and folders.


7. Burn Disk 1 with label: GF2_1
8. Burn Disk 2 with label: GF2_2

Install Sequence: DVD1-DVD2- Open Task Manager and End Task all msiexec.exe and EASetup.exe that are present.

Tested works.

NOTE:
The installer will give an error "Please insert disk The Godfather 2" at the very end of Disk 2 because of the missing "Joypad_example_txt or #joypad.cab" at sequence "3728". It was the last file that I did not found inside my DVD... But the game works perfectly without it.

If someone can try fixing it that would be great. thx.

The Godfather II (2009) DVD9 to 2xDVD5
 

Create folders with name Godfather II and Godfather II_2.
Content for Godfather II disk should be like this:
Attachment 1746
Content for Godfather II_2 disk should be like this:
Attachment 1747
In Godfather II replace file autorun.dat with same file in autorun.rar.
http://rapidshare.com/files/217009428/autorun.rar
Install sequence DISK1-DISK2-DISK1

The Godfather DVD9 To 2xDVD5
 

The Godfather II DVD9 TO 2xDVD5

1) Create 2 folders:
DISK1
DISK2

(These are gonna be the DVD/ISO labels)

2) Copy all the DVD contents to DISK1 folder.

3) Replace autorun.dat with this one:
LINK

4) Move the following files & folders to DISK2 folder:
movies (folder)
GODFATH2.viv
From data_gf.cab To data_gf5.cab

And copy autorun.inf & GF2.ico to DISK2 folder.

5) Edit autorun.inf to look like this:

[autorun]
open=0
Icon=GF2.ico

6) Make ISOS or Burn with the labels DISK1 & DISK2.

Sequence : DISK1 - DISK2 - DISK1

RE-WRITING Conversion to DISK1 - DISK2 sequence, please be patient.

dark_prince69, you seem to be only one who edited embedded mst's

is there reason for DISK1 and DISK2 disk prompts? you added those on english install but other languages have original disk prompt + 1 or 2 at end depending of disk.

Little suggestion.

If there is no install errors for using other than DISK1/DISK2 then i would use The Godfather™ II DVD 1 and The Godfather™ II DVD 2 instead for english also.

EDIT: @animex2k9, error at end of disk2, joypad.cab is embedded into autorun.dat, so copy autorun.dat also on DVD2 and that might fix missing error in your conversion

dark_prince69 your coversion is good but it's asking for disk2 too early, try to edit autorun.dat by putting the GODFATH0.viv and GODFATH1.viv on disk1 and the rest of the .cab on disk2 see if it's working!!

ravd, there's no install errors, I changed to its original name adding the 1 & 2 on front of each, I'll be uploading in rapidshare in a few minutes.
canibus2677, I don't see what seems to be the problem with asking the DVD earlier, I think there's no need to mess around with the embedded mst files anymore , I guess..or Is It?

The Godfather II.(2009) MULTİ6 TESTED AND WORKS
no error

1. Creat folders

Godfather II
Godfather II_2

2. Copy all files and folders to Godfather II

3:looking at the picture below into the file with Orca autorun.dat edit
Attachment 1748

4: and excluding all other Group0.cab file data_t14.cab. cab files ending with II_2 Godfather Move to folder

5: Copy the files are written to GodfatherII_2

Autorun(folder)
DirectX(folder)
Redistributable(folder)
Support(folder)
TeamSpeak(folder)


6: written below in the file folder, move Godfather II folder GodfatherII_2

movies(folder)
GODFATH2.viv

7: Now make ISO files:

First DVD's label will be: Godfather II
Second DVD's label will be: Godfather II_2

Install Sequence: DVD1-DVD2-DVD1

senseman it's working but it's asking for the disk not for disk 2(disk 1)!!
It's not good!!:confused:

The Godfather™ II (DVD9 to 2xDVD5)

1) Create temp folders

'GF2_1'
'GF2_2'

2) Copy DVD9 content to 'GF2_1'

3) Move 'GODFATH0.viv-GODFATH1.viv' files from 'GF2_1' to 'GF2_2'

4) Copy autorun.inf and GF2.ico from 'GF2_1' to 'GF2_2'

5) Edit autorun.inf in 'GF2_2' and change open=AutoRun.exe to open=0

6) Copy and overwrite edited 'autorun.dat' to 'GF2_1'

7) Burn or make isos with labels 'GodfatherII_1' and 'GodfatherII_2'

Install Sequence: DVD1-DVD2-DVD1

peterf1999 method works for me.

Win Xp sp3
English setup only tested

------------------------------------------
7: Now make ISO files:

First DVD's label will be: Godfather II
Second DVD's label will be: Godfather II_2
------------------------------------------
senseman, i think DVD1's label must be Godfather II_1 according to media table.

I tried to kill it must be yes if the label is not to kill does not terminate the installation

THE CONVERSION OF dark_prince69 IT'S THE BEST, tested and working 100%!
Thanx dark_prince69 again!!
You have a beer from me!! :D :D

try that one.
couldnt test it.

make the same like in peterf conversion, but use this msi.

the label:
disc 1=Godfather II
disc 2=Godfather II_2

Some suggestions which "might" fix error

1. Run setup.exe instead autorun.exe

2. Change diskprompt and label only for dvd1, leave dvd2 as it is (worked for quantum of solace and some other games, but problem with this was that it asked installation disk at end of disk 2 when it wasn't needed)

Or it is non-fixable windows problem, same error happens sometimes even with original discs (GTA IV)

It's perfect. thx.

Here it is (for italian & spanish users), follow the steps of my previous conversion ;)

Thanx peterf1999, works!
grazie mille

Works perfect.

Thx.

It's alive!!!
 

It works... Nice job :D
The only thing i h8 about these EA install programs is damned Uninstall... Lasts too long... :)

Thought you may like to know - I tried this method and works fine!
:)

the version of peterf1999's was just perfect.

conversion is coming... :)

Ty sensemen,
good work :D

@dark_prince69 thanks for ur effort.works perfect.:D and i replace crack with orjinal exe and its more perfect.if u add your conversion or someone want to do like this first do @dark_prince69 conversion and then replace the files in my link.
here is the link for changed cab and autorun files.cheers buddy..:D
http://rapidshare.com/files/25391958...ceditedaut.rar

thanks works perfect, can always count on peter

I know, this game is very old, but i put my hands on it just today... i was looking for a conversion and found here, but in a DVD1-DVD2-DVD1 sequence, so i made my conversion with DVD1-DVD2 sequence, i hope you enjoy...

Just replace autorun.dat

and look at screens:

dvd1.png -> dvd1 contents

Attachment 1740

dvd2.png -> dvd2 contents

Attachment 1741

durring the installation you'll get this:

Source file not found: E:\GODFATH0.viv. Verify that the file exists and that you can access it.

Attachment 1742

Just mount or insert the second DVD and click Retry...

When the installation finished it will say:

The wrong volume is in the drive. Please insert volume Godfather II into drive E:

Attachment 1743

just press cancel several times if appear again.

and the game is installed:

Attachment 1744

i hope you enjoy it.

cheers

thank you peter.......cool