HDD if is ide starforge
 

*******************************************
and one more thing can you send me one photo full
please;;

to see what cables i have to set off( one photo will all the back inside) please;; i you can;;;;
after i will do inplug the cables

do i ahve to go in
Contro Panel/ System/ Hardware/ Device Manager/ CD-DVD drives.

to do uniinstall;;;

my dvd drive is up
and
my dvd recorder is in the second position
**********************
i know that i ahve to to unplg my dvd drives and dvd recorder in my case
but i have one qustion;;

do i have to change my hDD (ide) amd to put him in one card scsi;;

can you help me please;;

starforge checks and ide channels;;;

in this case what i do;;

You need to unplug the IDE data cable (you can unplug the power cable, too, if you want). The IDE data cable is a long, 40- or 80-wire, very wide so-called "ribbon" cable, it goes from the motherboard to IDE devices - hard disks and CD/DVD drives - and it usually has three connectors - one for the motherboard and two for two IDE devices; if you can't find it, ask a friend or go to your local computer shop to show those cables to you.

To make your CD/DVD drives disappear, yes, you could move them from IDE to a SCSI or S-ATA controller. But NOT the CD/DVD drives you already have as IDE, SCSI and S-ATA have completely different connectors!

As for the rest of your post, sorry, I don't understand it...

can you help m,e with this
*************
e as IDE, SCSI and S-ATA have completely different connectors!******To make your CD/DVD drives disappear, yes, you could move them from IDE to a SCSI or S-ATA controller. But NOT the CD/DVD drives you already hav******

i dont understand
if i will unplug the ribbbon will can i play the games which protects
with starforce;;;
and go in the mamager and set off the drives cd and dvds
will can i play the games which protects
with starforce;;;

or i need to move them from IDE to a SCSI or S-ATA controller. But NOT the CD/DVD drives you already have as IDE, SCSI and S-ATA have completely different connectors!;;;;

can you help me please;;

do i need to do this with my drives''';;;
please;;

if i will unplug the ribbbon will can i play the games which protects
with starforce;;;
and go in the mamager and set off the drives cd and dvds

so i dont need nighrmare starforge
and

and i don t need eed to move them from IDE to a SCSI or S-ATA controller.

can you help me please;;

You need to hide your IDE CD/DVD drives; either with Starforce Nightmare and other tools (see the FAQ for the list) or by physically disconnecting them. The latter might be the better solution, as Starforce re-activates IDE CD/DVD drives, unless you have motherboard with nForce chipset. Some say Virtual Drive Pro 10 can also hide CD/DVD drives properly.

If your IDE CD/DVD drives are hidden, THEN you can mount a mini/maxi/full image of the game into Alcohol 120% or Daemon Tools and play. (Starforce will think that the mounted image is actually the original CD.)

but my motherborad is not reforce

so

the best solotion
is to unblug them, plhisicaly;;;
am i corect''':;
so in my case i dont need starforge or viusual drive
becuase my motherborad is nforce

do i ahve wrihgt;;;;
foster;;;;

becuase my motherborad is not nforce

foster;;;
or in my case i have to,,use and nightmare;;;

Try both. (And again, Starforce Nightmare is NOT the only CD/DVD drive hider tool!)

now can i ask you one another quetsion;;;

when i will open my case
i will unplug the ribon from motherboard which is down;;;;

No, unplug the device (CD/DVD drive) only.

By the way, as you're obviously a beginner in PC hardware stuff, I would recommend that you ask a knowledgeable friend (neighbor, school mate etc.) to explain basic things to you. Perhaps, you could try to find a Greek forum if you're having problems with the English language. You may get better results by doing that; by asking such simple questions and waiting for the answer for hours, you will not solve your problem within a year...

can i do one another questiom
when i will open my computer
i will do unplug only the riibon which is down the motherbaoed which conects the dvd drives and dvd rom drives;is not nessasery to unplug the ribbbon from up side which are the dvds and dvd rom;;;

when i will unplug the riibon and do restart can i put the case of my computer;;;
beofore or later;;;

then i have to go in the devise manager for

to unistall the drives
but how can i later after 2 weeks if want to use my dvds and cd s
to install them again;;;
how do i need any cd to install them later because exple ( ALREADY NOW
I WENT AND I DID UNINSTALL THEM HOW CAN I DO ISTALL THEM:;;
when i will be in decision to to put the riibon again which connects
the dvds and cds first i put the riibon and then i do install the drives;;;
soory for all this questions sooory but you must understand me
i am leraning things tthat i didnt know before in past!!!!!!!!!

WHEN I WILL DECIDE TO DO UNPLUG PHISICALY BEFORE I DO

THE COMPUTER MUST BE CLOSED;;;
AND EVERYTHING IS BACK IN THE CASE TO TAKE OFF FOR TO OPEN MY CPU;;;;

If you re-connect the drives, Windows will re-activate them automatically; that's what Plug & Play is for.

From Where Can I Download Virtual Drive Pro;;;
Can You Help Me Please;;

Search on Altavista, Google or your favorite Web search site.

But Can You Help Me Please;;

In The Last Post;

First I Have Make A Koclusion And Tell Me If I Do Wronk Ok;;

First I Close My Cpu
I Open My Case
I Unplug The Ribbon Which Connects The Dvd Roms And Dvd Recorder
I Unplug The Ribbon From Up Side Which The Drives Are
And Not From The Montherboard Am I Correct;; Until Now;;
Which Is Down
Then
I Put The Case Of My Cpu
I Do Start The Cpu
I Go In Devise Mamnager I Do Unstall The Devices
Am I Coorect Tell Me If I Do Any Wrong Please;;
Corect Me Please;;;

In The Meatime While I Have Unplug The Ribon From The Drives
Must The Case Of My Cpu Not To Put;;;;

Or To Put;;; The Case;;;

If you unplug the devices, they will get uninstalled automatically, you won't see them in Device Manager anymore. As for putting the case back or not, it doesn't matter.

This is my last post in this thread; I cannot spend time with answering basic questions.

AND ONE LAST QUESTION PLEASE;;
FOR EVERYTHING UI HAVE TOLD YOU IN THE LAST PM

ABOUT;;************************************
First I Close My Cpu
I Open My Case
I Unplug The Ribbon Which Connects The Dvd Roms And Dvd Recorder
I Unplug The Ribbon From Up Side Which The Drives Are
And Not From The Montherboard Am I Correct;; Until Now;;
Which Is Down
Then
I Put The Case Of My Cpu
I Do Start The Cpu
I Go In Devise Mamnager I Do Unstall The Devices
Am I Coorect Tell Me If I Do Any Wrong Please;;
Corect Me Please;;;***********************

AM I COORECT

PLEASE;;

Yes, you're correct. One thing: the devices will disappear automatically from Device Manager.

But After I Will Unplug The Ribbon From The Upside On The Cds Drives And Before I Close The Case The Ribbon Where O Will Put It
After I Will Unplug It I Mean I Will Put It Down In One Side And

I Will Close The Case ;;

Do You Understand Me Lll The Rest Of The Riibon After I Will Unplug It Where I Will Put It Before I Close The Case;;

and one last thing and this is the last

do i have to unplugging and the power cable; with the ribbon ;;;;
together;;;;
do ihave to;;;