Help with X.B.I.T
 

im a newbie with all the mods n everythin. heres the situation, i bought a X.B.I.T mod chip from mod-chips.com, i installed it into the xbox as it sez on the site. but what now? the main chip is inside, and a black and yellow wire threaded out to another lil chip thing. i also got a usb connector with it. im totally lost, have i dun the installation?

can anyone help in guiding me through, simplest as possible. ive checkd the newbie xbox guide, but still find it confusing. wots all the bios n flashing. im really confused :confused: .

please, if any 1 can help, ide appreciate it to the max.

thanks

tingstings

hmm its pritty easy. Right so you have the inside modchip all hooked up yep? and there are yellow cables attatched to a lil chip on the back of the xbox correct?

It should have a place where u plug a usb cable into to flash the xbit. Right once thats connected up to the xbox and to the pc its time to flash the chip.

go on this site for the app u need to flash the bios http://www.dms3.com/cgi-bin/xbit/site.pl?page=home

i followed this tutorial
http://www.mod-chip.com/xbit_transfer_software.htm

i started up the xbit flash tool. made the connection to my xbox, selected to format, picked the requried configuration. but then it sez select a valid bios according to you configuration....wot does that mean.

im really lost.

you need to get a valid bios such as x2 bios and it has to be the correct size to fit in the specific slot. you can choose betweena 256 512 and 1mb bios the xbit has 2 mb room to store your bios so you should prob get the cromwell bios and the x2 bios for reasons im not aloud to tell you where to get this sept cough *xbins*

cromwells garbage
just xbins for x2 4981.06

as said above, cromwell is horrible, but is not meant for games anyways. I suggest the same bios as AX.


Hope you can wait your next 11 or so days AXmichigan, nice to see you are getting better.

oo thanks quall
yea 10 days now!
:)

if hes got 2 1mb bioses why not just have a linux bios and a x2 one

if u have money, y not waste it?
o wait
CUZ ITS STUPID AND USELESS

I would only do that if you ran linux. Otherwise, something like the debug bios would be more usefull. At least that way, you can make screenshots of the games.

he sounds liek a beginner
probably is one
y complex things for him?
let him just do the x2 now
and if he wants to mess around later
then he can

wow thanks for the replies dudes.

n yes, i am a total beginnner. i bought the xbit chip thinkin all ide have to do his a simple installation n then backup my games like i do my pc ones, but obviously that woznt the case.

xbins for x2 4981.06, i dun understand, xbin the name?, n the 4981.06 the version?, wot is the 'x2' part?

sorry, i just need to get all things clarified :o .

help again plz :)

http://www.xbox-scene.com/articles/xbins.php
thats how u use xbins
and yea
x2's 4981.06
x2 stand for xecuter 2
they made the bios
just flash it with that
u know the wesbite that explains how to use the chip right?

thanks AXmichigan. well, i know how to format my outerchip to have the flash configuration. is that what you meant by using the chip.

also, case scenario, i get the bios written onto the allocated slot,what do i do then. i got the dashboard on cdrw. do i then insert that?

yea
first put the chip in the right position
then...
put turn it on
make sure the bios boots
turn it off
turn it back on by pressin eject
put the cd in
and if u did that right
it should be fine

im gettin all of it apart from :confused:

-first put the chip in the right position(u on bout flicking the 4 switches accordingly on the chip?)
then...
-put turn it on (put wot to turn on?)
-make sure the bios boots (how will i know if it boots)

the rest of its got me confused :o

soz dude. if ya could just clear this up for me, hopefully ill be on my way to get this dilemma resolved

to flash - http://www.dms3.com/cgi-bin/xbit/sit...oftware_manual

to install - http://www.dms3.com/cgi-bin/xbit/dia...ogopin_Install

setting up evox - http://www.fileforums.com/showthread.php?t=49079

to know if the bios boots
itll say xecuter 2 under the splash x
instead of microsoft
follow all those
chronologicaly
it should work then

cheers AXmichigan,all help appreciated. gna try it now

yea no prob
good luck
let us know if anythin goes wrong

the situation after nearly 2 yrs....no further.

i gave what you sed a go after a long break. this is the status.

1. installed and checkd the chip was in the right place (chking control points in diagram)
2. connected the chip to the computer via usb and flashed with configuration of x4
3. formated and wrote binary file EvolutionX 2.0 (1024, selected 1mb partition)
4. put the files of (default.xbe, evox.ini, bios folder and skins folder). tried with configuration of harddrive f:\ and e:\ (as it sed it needs to be changed if there is a second harddrive. i have two harddrive looking parts in mine xbox, so wasnt sure, so did both)
5. tried with both DVD+RW and CDRW...conclusion.....i get the default microsoft dashboard and the error, disk not recognised.

whats gone wrong, i followed everything step by step, but still end up here....AXmichigan or n e 1...any help?!!?!

i would appreciated n e help. ive had the chip this long and still got no where.. :(

thingsthings

i'm kind of new at this so i have a couple of questions. i had a friend that put a xbit chip in my xbox and loaded all the bios for me. i added a second HDD to my xbox. the HDD i'm using now is a 80 gig, and the new one is a 120 gig. do i need to get seperate bios to use the second HDD. i'm not even really sure what bios i'm using. i have all the wires ready for the second HDD but havn't hooked it up yet. can someone please help me.

Do you have an HDD switch, or ar you replacing the 80 gig drive with the one you have?

The bios you have is fine. You just need to unlock the current 80gig drive from the eeprom so the new drive can be used. After the 80 gig drive is unlocked, you insert the new drive and partition it. The EvolutionX dashboard can unlock the drive for you. It can also partition it.
You have to:
1. backup the current drive
2. unlock the hdd
3. swap drives
4. load evox or other application that can manage the HDD
5. partition the drive
6. send the backed-up files to the new drive

i have a hdd switch. so right now i'm running the 80 gig and want to hook the 120 gig up as a backup, cuz i'm running out of space. what should i do?

Well, then, switch to the 120gig drive and use evox to format the drive. You will need to backup the C partition of the 80gig drive so the 120gig drive will have a dashboard.
Format: http://xbox-scene.com/articles/hdd-ftp.php

You can search the net for "slayers evox auto-installer". It is a version of evox that will format and restore new and old hard-drives easily.

so i can just plug the 120 gig in, and switch to it and format it? will a menu show up to show me how to format the drive and unlock or lock (whatever is needed). is there a easier way to install a dashboard, instead of backing up partition C. and how would i backup partition C if thats the only thing i can do.

The bios are fine, someone just modifed the hash of the ini or the bios in the past. Why do you think slayers needs a newer bios flashed to the chip? You get some odd message?

A menu may or may not show up (other than the dashboard). It depends on the method. You may or may not need to backup the C partition. I already answered both of your questions in my last 2 posts.

wooah this thread is old
quall's still my boy

ok now i have a problem. when i connected the 120gig harddrive in i got a error saying the dashboard couldn't be launched. what do i do. i just opened the hdd and hooked it up. what should i have done......??????

You should have loaded up evox or compliant software, formatted the drive, and re-installed all the software/files that you backed up from your original drive.