![]() |
I'm New Here
I'm new here, Please Be Gentle
I was Thinking of getting a mod chip but which one, Which is the best, I was thinking of the PS2 Plugmod Is it any good What else do i need [hardware] Will it work for PS1 & PS2 and where can i get it without using a credit card because I don't Have one Thanks for the co-op:) |
The Messiah, Magic 2, Apple, and Matrix 2, are the best chips available...They are all DIRECT BOOT chips (which means, you don't have to swap with a gameshark and original game)...
You just put in the backup and play.....:D Quote:
NO.......It sucks........ Quote:
And you should also consider purchasing a DVD burner..(Pioneer A03 or A04 is what most on the forum uses) Yes.... Most mod chips will work with PS1 games also.... |
Where can i get those chips
Do they require soldering I don't think it is the usb mod Here is the address so you can see it http://www.psxtune.com/ First one Yes I have a dvd burner |
Quote:
Yes....All of the Direct Boot chips require 23 wires to be soldered..(Unless you are a PRO at soldering, let someone install it for you) When I find out where you are located I can also rec. people that can do the install for you.... I see the chip you mentioned..... Do what you want, BUT if it was me.........GET A DIRECT BOOT CHIP......... What type of DVD Burner do you have.....? AND, What type of CD Burner do you have? |
BD
I'm From Ireland Dvd burner - Philips |
If your DVD burner is a Phillips it probably is a DVD+R burner, correct?
The +R format is harder to read in a PS2.... The one everybody like to use for the PS2 is the -R format..(Pioneer A04) WHAT TYPE OF CD BURNER DO YOU HAVE...(Model # etc):cool: |
It can also copy cd's aswell
but I also have a completely seperate cd burner on my other pc 2.53ghz 512mg rd ram 128mb Geforce 4 ti 4600 etc |
You do not need to use you DVD burner to burn CD based PS2 games..... It is not RAW+96 capable and thus cannot produce a 1:1 copy....
Also....Does your DVD burner burn DVD-R's or DVD+R's.... |
I don't know
How do I check is there any point Do you know anybody In Ireland that will do the job- probably not |
Look at one of you blank DVD disc case.... IT WILL SAY DVD-R or DVD+R....
(What type of dvds do you buy when you want to use your burner???) Yes there is a point......IF ITS A +R burner there is a good chance your PS2 will not read the disc...... |
It says Philips DVD+RW-DO1
|
Ok.....That format is not the best for the PS2.....
Some PS2's will read a +R disc.....MOST will not.... How old is your PS2.....? Look on the back of your PS2... There is a sticker on the back....There is a number also... It starts with SCPH-#######..what is that number? Then we can tell what version PS2 you have..(You have to find this out BEFORE you purchase a mod chip anyway) |
Its the version 4
30003 |
You are going to have a HARD time getting your PS2 to read the +R discs.... They have been known to work on a V4 BUT not very often...The V5 and above have alot higher success rate...
|
What about xbox , Dreamcast etc
|
I'm not very familiar with those two consoles....
I do know that X-Box games involve ALOT more work to copy one... |
Not really the enigma mod chip has everything
Direct boot etc but the mod inself has 30 pre soldered joints you have to solder, there is no way in hell that i'm am going to solder 30 joints! anyways regarding ps2 dvds you could always give me some:D |
I know what you mean...... I didn't mean about the mod chips thereselves.....
I'm talking about backing up the game....Since X-Box games are larger than 4.37 gigs they won't fit on a DVD-R....(without ripping) I know people are copying them now BUT its harder to copy them than it is a PS2 game.... I'm with you on the soldering thing......I'm NOT soldering ANYTHING....Much less 30 joints......:D |
Okay, Thanks for the Info
I have to go now I'll be back ----------- SOLIDUS ----------- |
| All times are GMT -7. The time now is 02:32. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
FileForums @ https://fileforums.com