PSXChange Boot MOD Disk
 

Thank you Game Forum creators for a fantastic site. I have two questions, which I hope someone can help me:

1: I recently purchased a PSOne unit and thought I would try using the PSXChange Boot MOD disk before I crack the case on it. I am not having much luck with the Boot disk. Has ANYONE ever heard of ANYONE having any success with this Boot MOD disk?

2: How can one tell if the burned import is successful besides running the unit in a MOD ps-unit? If one is able to place the import CD into PC and have the PC read it as if it were the original, is this a "true test" of its success?

Any insight at all would be much appreciated.

I have emailed PSXchange twice and they have not been much help...which makes me think I was screwed $20...oh well...

- Muon Tracker

I use the PSX Change2 Boot Disc on my PS Console and I have never had any problems reading successfully burned games or originals. Where did you get the disk? Did yours come with the spring or the cardboard tab to install? Maybe that is the problem.....

I bought the Boot Disk from ModChipInc, USA (directly) and use the cardboard strip. The boot disk loads fine and informs me to replace the Boot Disk with the import and press start. Once I do this, the import disk just spins and spins. I use Nero 5.5 and setup the configuration as suggested by a reliable website (do not have it on me right now). It appears to copy the CD successfully, and I can read it in my PC as if it were the original, however, they never work. Any suggestions?

How do you check a successful import CD without a working MOD?

Thanks, by the way!

- Muon Tracker

A couple of other things?? Are you using NTSC or PAL? What games have you tried to burn? I'm not familiar with Nero, I only use CDRWIN and CDClone. As far as I know, you can't play burned games without a modchip. I have only used NTSC games, so I'm not familiar with PAL, but from what I understand, you need a stealth chip to play PAL games on a NTSC console and Vice Versa.

****If I'm incorrect, please correct me..******

Hi m8ty
I totally agree with the above posts,cdclone or cdrwin is the way to go for backing up psx games.
the problem with nero is that in does not support reading sub-channel data from tracks which is a feature of the psx protection.
Use cdclone to make 1:1 back ups and check on the megagames site to see if any of the games you are trying to back up are mod-chip protected,that's when cdrwin and 'patching games comes in'.
Get a program called clonyxxl from www.cnet.com , it detects the protection on a disc and then you start up clone from there and it passes on the settings needed to clone.

Firstly check www.elaborate-bytes.com (the clone website) to check for compaterbility to your reader and re-writer.

Hopes this helps

Thank you all for your expert advice. I WILL try the Clone CD. I had it before, but could never get a solid successful burn from it, so I dumped it. I will follow the link and the advice from both of you and let you know how it goes.

Your posts have raised further questions and concerns which I had not thought of:

1) Obviously I can not simply burn my PS games and slap them into the PSXchanger and go...there will be more to it and each game is different?

2) I can get software to help patch problems...and so the quest continues.

I will be back...many times...I am sure...thanks again and what a great forum!

- Muon Tracker

What game are you trying ? Try another. I know that psxchange has trouble with ea games and you must use a anti mod disk also. I had trouble with harry potter. Just a black screen but with a anti mod It runs fine.

Again, thank you all for your responses…they have been very helpful toward educating me in the Dark Art of PS Importing. However, my problems are still occurring. Let me answer some questions that were fired at me:

KIDXTC: I use only NTSC|U/C playstation games. The games I have tried to import are Spiderman (1), Crash Bandicoot, Crash Bandicoot Warped, and Harry Potter. I have, of course, many more games, but thought if I could not get one of these four to work, why continue?

OURKID: I dumped my NERO and downloaded CLONECD 4.0. I tried using this on Crash Bandicoot and still the same thing happens as described in my original post. Also, I downloaded CLONYXXL and it is ALWAYS in German, do you or does anyone know where I can get an English version of this software? I have checked my hardware and am compatible according to CLONECD’s webiste (SONY CDRW CRX700E and Toshiba DVD). I have tried direct copy from the DVD to the CDRW and also just from the CDRW to the CDRW (taking CD’s out when asked).

BUZZON: Thanks for the settings! I tried all of this in CLONECD 4.0 with Spiderman (1) and still the imported CD just spins and spins as I posted originally. It should not be this hard?

KNARF: Take a look at my response to KIDXTC for the list I have tried. I only have been using the NTSC|U/C playstation games…none are EA. You mention ANTI MOD and it runs fine…excuse me for just getting involved with MOD, but this is a chip you soldered in or something? Or just patched your burn somehow?

Thank you all for being so much help. I will conquer this quest I am on…if it can be done, I will eventually do it. Any additional help would be appreciated. Does anyone know if hacked versions of burning software could make the difference?

- Muon Tracker

PS...I should not be able to close my PSOne door after installing the cardboard sticker thing, right?

What type of media are you using? I personally use Verbatim, it is very good media.
You are using the term "Imported", are you buying games from other countries or are the strictly American games - NTSC-U/C?
If you are using games from other countries, you my have to patch the copy with a PAL to NTSC patch for each games.
You should be able to close your lid after you install the tab. You can also leave the lid open when you play burned or original games.
Give us more specifics: What type games (NTSC-U/C)?
What type media you burn to?
Also, make sure that the originals that you are using aren't all scratched and smugged up. The originals need to be as clean and smooth as you can find them. I was having the same problems with Syphon Filter 3, It was a rented game and probably just so messed up, it wouldn't copy correctly. Good Luck.

HELP!!!!!!!!
 

I am VERY VERY UPSET. I am a HUGE FAN of the dance dance games. I Also bought the psxchange boot disk. I cannot play dance dance revolution 3rd mix, 4th mix, 5th mix . and beatmania best hits. it acts all retarded and it has that Red sign saying that software aborted or something like that.. PLEASE PLEASE PLEASE PLEASE help me.

KIDXTC: I use FujiFilm CD-R-700MB. They seem to be a very good medium for Music and other software, but maybe not for PS backup. I use the term “Imported” because this is what the PSXChange software uses…I am correct in assuming this is their nice way of saying “burned?”

Since you run a PSXChange, can you describe exactly your procedure for running your Boot Disk? Perhaps I accidentally purchased some crazy “import game” only Boot CD. But I think they are saying IMPORT when they mean BURNED.

I am using ONLY American games (National Television Systems Committee).

With my cardboard tab, I thought it blocked the hole where the lid closes, therefore I COULD NOT close the lid without simply placing something on top of it. I simply pushed a little harder and VIOLA! It closes fine…THANKS!

Some of my CD’s are a little scratched, but I have tried even the smoothest (new) CD’s and still no luck.


And I found the LIST for protected games finally…for anyone wanting that URL its:

http://www.megagames.com/psx/psx_pro...games_us.shtml

This is for PSONE only and also for US-NTSC games. The others should be easy to find from there!

If you install the sticker correctly it closes just fine, the diagram that comes with it does a terrible job of showing where it does thou. The strip that juts out goes into the hole but the edge should be at the edge of the slot (where the lid catch goes into the system is a sqaure) the edge at the back of the tab should be against the edge pointing into the center of the disk drive and not up against the outside of the disk drive oval.


http://home.att.net/~timbond/wsb/med...5/site1169.jpg

Crap! You are right! I did not read the instructions like that at all, and ended up placing my tab right against the edge of the circular diameter. I think I will move it in closer to the center as you show in your pic? Do you think this is wise?

This is why my door was jamming, I had too much of it over the hole...great pic by the way...it really explains it all...maybe MODCHIPINC should invest in something like that!

- Muon Tracker

Not nessecarily, once the tab is attached and removed it's hard to get it to stick and stay a second time.

Thats what I figured, and anyway, it seems to be working fine as it is. Thanks though...

- Muon Tracker

PSX boot-disc
 

Hi Muon Tracker, Ive have simular problem with my boot disc and I
called Game-Gizmo and found that my older PSX needed a different boot-disc than a new PS ONE.He asked what color my boot-disc was,it was silver,he said i needed a black[or blue i forget] anyway Ihave to send it back to get right one,maybe you also got wrong one.

Kidxtc you use Verbaitem cd-rs,I was wonderihg if they are made in Japan or Taiwan,I read that cd-rs fron Taiwan dont work good ror psx copies and all the Verbaitem I can find are made there.

The one I use has a Green and Black label NTSC version 2.0 and has a black bottom just like a Playstation game.

I use the blue print and silver CD with a silver back...version 3.0N. It does work excellent now that I use CDRWIN3.8G with the correct settings.

Yea I got the silver back one sent to me but I needed the black backed one for my older psx.Good think I have a gold finger already so I can still boot up to play burns.:)
By the way what type of cd-r's do you guys like to use?I've tried Fuji,Memerx and Maxells,all have worked,but only about 80% as still get a few costers.Verbatum seems to be the experts choice on this forum I need to try them.

I use Verbatims, I'm not sure about the whole Taiwan issue. From my experience, any media with a blue bottom, those seem to be the best.

Mine worked great
 

Just want to add my 2 cents to this subject. I had been a PC gamer for the most part, just recently purchased a PSone b/c the price of it was so cheap. From even before I got it I heard about modchips and boot disks. I could never actually try one since I dind't have a psx. Well after I got one I went net' surfing and when I did I found a website based in Hong Kong. www.lik-sang.com , they said they had the PS-X-Change disk, I read about it on other sites, they claimed it worked so for a totalof 21 dollars I ordered one. After I got I I started testing my backups and all but a few worked like 26 out of 30. And now I notice that the ones that didn't work were b/c they needed a patch. Now all work. I would highly reccomend the PS-X-Change boot disk to anyone.

Muon Tracker, did you managed to get the Harry potter copy to work with the PSXChangeV2?
Should I always try to run the originals with this boot disk before making backups?
The ideia is that if the originals work, a perfect copy should work too!?
Please advise.
My HP backup doesn't work like the original. It's a UK version.

cheers

EE

Great stuff m8s
I managed to get my original and backup of Harry Potter (UK version) to work!!!
I used PS-X-Change V2 and after this one I used the “Import Player For PAL PS1” boot disk and…voila!!!
Great stuff
Thanks for all replies.
I’m Happy!!!!

Cheers

EE

I can't use GameShark
 

I had the same problem with Harry Potter, and other EA games. The Import Player CD took care of the blank screen. My problem is, using a boot CD, and the Import Player, I can't use GameShark. Bummer! Has anyone found a work around for this? I know I could mod the PSX, but until now, I haven't had to! I use CDRWIN to burn. Is the problem still there burning with other software?

PS-XCHANGE BOOT DISK
 

I have purchased the boot disk and instaled the little plastic strip and it works fine