Spyro 3
 

Hi There
I just got the patch for spyro 3 (the pal version)
installed the patch burnt the game and it stops at 5per cent of the game.Is this were it stops in the game without the patch and if so what have I done wrong.
The patch was the Bad version patch
Thanks
Hitty

sorry man, but the Bad crack dosen't work, just like the Paradox one. I'm still waiting for the 100% PAL crack. If you find one, I'd love to hear from you!

I have also had the same prob and would love to hear from you should you find a working one..

Cool
Thanks guys If I find one I will let you all know
But if anyone finds one lets us all know
Thanks
HITTY

Same thing I patchedit with the paradox patch +4 trainers and it failed. Somebody hellllllp!

hello, i'm going to do this, i have the spyro3 pal, i do the image and put the image into NTSC and then i use the pdx patch 100% +2trainers, and finally i put in Pal version with the pal4u and i burn it, if it run i tell you

if youre plan works over the if you let me know

I doubt there will be a working patch for PAL version.
Paradox NEVER have corrected any of their later stuff ups.
Attempting to conver to NTSC to try patching is idiotic and will not work.

Why don't they remove that pal patch? Or at least place some kind of warning.

--

"Ja toch, niet dan?"

Calimero

Clone it!

I agree with the above post. Just clone it using CloneCD. It means you never need to worry about patches. Just as long as you have a decent CDWriter and use quality media. I have had no problems with my Sony CRX140E and Memorex or Sony (blue) CD's.

i have tried with clone but i don't know what settings to use...
i use verbatims discs and my writers are a hp plus 9300 series and a ricoh MP7060a........ should i be alright with the right settings???

Phuckit: I got all the settings from here : http://www.daemon-tools.com/clonecd.htm. You basically just need to make sure you read and write @ 1x speed and make sure when you make an image to select the 2 "Read subchannel data" tick boxes. Then, when writing the image to a CDR, make sure you tick "Do not repair subchannel data". But all this info (and screenshots) are on the above URL. Worked for me! Good luck! :)

Their are no fully working patches for Spyro 3 us or pal versions,clone cd is no use eithier it can copy one lc4 protection but not multiple lc4 as is the case with this particular game,dont waste your cds wait a wee bit longer.

WRONG!! CloneCD copies this fine!

hey...i think this will work...you can use a game enhancer to take this anti protection off....I used it for "Dino Crisis" & "NBA shooutout 2k1", and it work good....try this code

D007AF6C 023A
8007AF6E 1000
D0078464 0008
80078466 2400

or

D007AEE4 000A
8007AEE6 1000
D0078464 0008
80078466 2400

I'm pretty sure that it would work....if it doesnt the sorry but it wont hurt to try...
ps...try not to use it with a patched spyro game..."it mite not load".