FileForums

FileForums (https://fileforums.com/index.php)
-   Conversion Tutorials (https://fileforums.com/forumdisplay.php?f=55)
-   -   Mini Compressor AIO 2021 (https://fileforums.com/showthread.php?t=96315)

Carldric Clement 27-11-2021 00:25

Quote:

Originally Posted by kj911 (Post 495028)
ISDone: Tested one/two languages configures INNO setups, and dont work. ISDOne, dont read the modified translated langfile, from during decompression process. Tested two <langname>.ini file, tested one langfile and without *.ini files, no more effect the ISDone messages. Any idea?

Hungarian translated ini file attached from testing.

Processing to updating MC. adding some language for Inno Maker. :)
Code:

[CustomMessages]
Language=ENG
MB= MB
GB= GB
TB= TB
Hour=hour
Hours=hours
Minute=minute
Minutes=minutes
Second=second
Seconds=seconds
SystemCheckNavigation=Check if PC supports this app
InstalltionNavigation=Start Installation
TipsCaption=TIPS
Extracted=Extracting
FreeSpace=Free Space
NeedSpace=Needed Space
Progress=Completed: <Progress>
SpaceLeft=<FreeSpace> Disk Free Space
MemoryLeft=<MemoryLeft> Memory Free
LanguageChange=Change Language
;Btn Caption
ProceedBtn=Proceed
InstalBtn=Install
CancelBtn=Cancel
FinshBtn=Finish
BrowseBtn=Change

YesBtn=Yes
NoBtn=No
OkBtn=Ok

DialogMessage1=Notification
DialogMessage2=RESPONSE
DialogMessage3=MESSAGE
SetupExit=Setup is not complete. If you exit now, the program will not be installed.%nExit Setup?
FileNotInDir=The file "<FileName>" could not be located in the specified directory. Please select another folder.Want to Browse?

;Side Panel captions
HomeLabel=Home
Infolabel=Information
SystemLabel=System Check
ConfigLabel=Configuration
ReadySideLabel=Logs
InstallSideLabel=Installation
FinishSideLabel=Finalization

;Welcome Page Captions
WelcomePageTitle=Home
WelcomeTitle=WELCOME
WelcomeCaption=Welcome to <AppName> setup wizard %nThis will install <AppName> on your computer
GuideTitle=GUIDE FOR INSTALLATION
GuideCaption=Follow these guides to help installation run smoothly
NavigationTitle=NAVIGATION
NavigationCaption=Use the sidebar on the left
More=MORE
Guide=Please turn off antivirus software during installation%nIf this is an online installation, please make sure you have internet

;Information Page Captions
InfoPageTitle=Information
InfoTitle=<AppName>
PackageTitle=PACKAGE
PackageDescription=<PACKAGEDESCRIPTION>
Other=OTHER
OtherPackageDescription=Genre: <GameGenre> %nRating: <GameRating>

;Config Page
ConfigPageTitle=Configuration
DirPath=INSTALLATION PATH
SelectDirlabel=<AppName> will be installed in:
PathDetails=SELECTED PATH DETAILS
DirTip=Make sure you have enough space
FreeSpace=Free Space
NeedSpace=Needed Space
AfterSpace=Space After Installation
TotalSpace=Total Space

;System Page
RequiredLabel=REQUIRED
YourSystemLabel=YOUR SYSTEM
MoreLabel=MORE
VerdictLabel=VERDICT
OtherComponentlabel=OTHER COMPONENT
ProcessorPagelabel=System requirements | Processor
MemoryPageLabel=System requirements | Memory
GraphicPageLabel=System requirements | Graphics
WindowPageLabel=System requirements | Windows
Processor=Processor
Memory=Memory
Graphics=Graphics
Windows=Windows

;Ready Page
ReadyPageLabel=Review
sysReviewLabel=SYSTEM COMPONENTS
DirPathReviewTitle=INSTALLATION LOCATION
CheckBtnLabel=Check

;Installation Page
Installation=Installation
InstallPageLabel=Installation
ProgressLabel=PROGRESS
StatsLabel=STATISTICS
InstallationTip=Please wait while app is installed
ElapsedTime=Elapsed time
EstimatedTime=Estimated Time
RemainingTime=Remaining Time
TransferRate=Transfer Rate
CurrFile=File

;Finish Page
FinishPageLabel=Finish
FinishHeadingLabel=COMPLETING SETUP
FinishedLabel=<AppName> has been installed successfully%nClick Finish to close setup wizard
FinishGuideHeading=GUIDE FOR APPLICATION
FinishGuideHint=Follow these guides to help run <AppName>
FinishedGuideLabel=You can now launch the application from your desktop%nYou can find another launcher under your startmenu%nUse control panel programs and features to uninstall the application

EDIT: This is old... Were going to use new version later.

Carldric Clement 06-12-2021 08:49

Mini Compressor AIO v21.4e - Stable Released

Changelog: here

Source code is updated on github. here

Go check it out. :D

kj911 09-12-2021 11:01

How to resolve the kill idle xtool.exe process properly, after press Cancel button from during installation??

@Gehrman, posted the problems: https://fileforums.com/showpost.php?...&postcount=118

Carldric Clement 09-12-2021 22:23

1 Attachment(s)
Quote:

Originally Posted by kj911 (Post 495125)
How to resolve the kill idle xtool.exe process properly, after press Cancel button from during installation??

@Gehrman, posted the problems: https://fileforums.com/showpost.php?...&postcount=118

What I've seen here the installer might be didn't pause when pressing the Cancel button was not insert a code. When I check it back on my installer, nothing happens when I see it. :)

EDIT: Ask Cesar82 to solve that problem xtool.exe process to pause it when pressing the Cancel button.

NouZ-Bi 11-12-2021 03:52

Hello, thanks you for this awesome tool.

I have a failure, when i try to compress using the insane parameter i have this error :

"Arc.exe: user error (Unsupported compression method or error in parameters: tor/$photo=lepton/$wavz=tta/$void=srep)"


Can you help me to fix it please ?

fabrieunko 11-12-2021 12:06

Quote:

Originally Posted by Carldric Clement (Post 495035)
Processing to updating MC. adding some language for Inno Maker. :)
[CODE][CustomMessages]
Language=FR
MB= MB
GB= GB
TB= TB
Hour=Heure
Hours=Heures
Minute=minute
Minutes=minutes
Second=seconde
Seconds=secondes
SystemCheckNavigation=Vérifier si le PC prend en charge cette application
InstalltionNavigation=Démarrer l'installation
TipsCaption=TIPS
Extracted=Extraction
FreeSpace=Espace libre
NeedSpace=Espace nécessaire
Progress=Terminé : <Progress>
SpaceLeft=<FreeSpace> Espace libre sur le disque
MemoryLeft=<MemoryLeft> Mémoire libre
LanguageChange=Changer la langue
;Btn Caption
ProceedBtn=Procéder
InstalBtn=Installer
CancelBtn=Annuler
FinshBtn=Terminer
BrowseBtn=Modifier

YesBtn=Oui
NoBtn=Non
OkBtn=Ok

DialogMessage1=Notification
DialogMessage2=RÉPONSE
DialogMessage3=MESSAGE
SetupExit=La configuration n'est pas terminée. Si vous quittez maintenant, le programme ne sera pas installé.%nQuitter l'installation ?
FileNotInDir=Le fichier "<FileName>" n'a pas pu être localisé dans le répertoire spécifié. Veuillez sélectionner un autre dossier. Voulez-vous parcourir ?

;Side Panel captions
HomeLabel=Accueil
Infolabel=Informations
SystemLabel=Vérification du système
ConfigLabel=Configuration
ReadySideLabel=Journaux
InstallSideLabel=Installation
FinishSideLabel=Finalisation

;Welcome Page Captions
WelcomePageTitle=Accueil
WelcomeTitle=BIENVENUE
WelcomeCaption=Bienvenue dans l'assistant d'installation de <AppName> %nCela installera <AppName> sur votre ordinateur
GuideTitle=GUIDE POUR L'INSTALLATION
GuideCaption=Suivez ces guides pour faciliter l'installation
NavigationTitle=NAVIGATION
NavigationCaption=Utiliser la barre latérale sur la gauche
More=PLUS
Guide=Veuillez désactiver le logiciel antivirus pendant l'installation%nS'il s'agit d'une installation en ligne, assurez-vous d'avoir Internet

;Information Page Captions
InfoPageTitle=Information
InfoTitle=<AppName>
PackageTitle=PACKAGE
PackageDescription=<PACKAGEDESCRIPTION>
Other=AUTRE
OtherPackageDescription=Genre: <GameGenre> %nRating: <GameRating>

;Config Page
ConfigPageTitle=Configuration
DirPath=CHEMIN D'INSTALLATION
SelectDirlabel=<AppName> sera installé dans:
PathDetails=DÉTAILS DU CHEMIN SÉLECTIONNÉ
DirTip=Assurez-vous d'avoir suffisamment d'espace
FreeSpace=Espace libre
NeedSpace=Espace nécessaire
AfterSpace=Espace après l'installation
EspaceTotal=Espace Total

;System Page
RequiredLabel=REQUIS
YourSystemLabel=VOTRE SYSTÈME
MoreLabel=PLUS
VerdictLabel=VERDICT
OtherComponentlabel=AUTRE COMPOSANT
ProcessorPagelabel=Configuration requise | Processeur
MemoryPageLabel=Configuration requise | Mémoire
GraphicPageLabel=Configuration requise | Graphique
WindowPageLabel=Configuration requise | les fenêtres
Processor=Processeur
Memory=Mémoire
Graphics=Graphique
Windows=Windows

;Ready Page
ReadyPageLabel=Réviser
sysReviewLabel=COMPOSANTS DU SYSTÈME
DirPathReviewTitle=EMPLACEMENT D'INSTALLATION
CheckBtnLabel=Vérifier

;Installation Page
Installation=Installation
InstallPageLabel=Installation
ProgressLabel=PROGRES
StatsLabel=STATISTIQUES
InstallationTip=Veuillez patienter pendant que l'application est installée
ElapsedTime=Temps écoulé
EstimatedTime=Temps estimé
RemainingTime=Temps restant
TransferRate=Taux de transfert
CurrFile=Fichier

;Finish Page
FinishPageLabel=Terminer
FinishHeadingLabel=CONFIGURATION TERMINER
FinishedLabel=<AppName> a été installé avec succès%nCliquez sur Terminer pour fermer l'assistant d'installation
FinishGuideHeading=GUIDE POUR L'APPLICATION
FinishGuideHint=Suivez ces guides pour vous aider à exécuter <AppName>
FinishedGuideLabel=Vous pouvez maintenant lancer l'application depuis votre bureau%nVous pouvez trouver un autre lanceur dans votre menu Démarrer%nUtilisez les programmes et fonctionnalités du panneau de configuration pour désinstaller l'application

.

French

Carldric Clement 11-12-2021 12:27

Quote:

Originally Posted by NouZ-Bi (Post 495144)
Hello, thanks you for this awesome tool.

I have a failure, when i try to compress using the insane parameter i have this error :

"Arc.exe: user error (Unsupported compression method or error in parameters: tor/$photo=lepton/$wavz=tta/$void=srep)"


Can you help me to fix it please ?

Lepton was not available. Use packjpg. :)

EDIT: use the given mc method like mcx or mcs. Mostly was done to solution.

Shaer 13-02-2022 18:18

Help to decompress!
 
Hi there !
i'v compressed some data with Mini Compressor v21.4e Stable with msx method. Now i need to decompress it using cmd command. but every attempt i try resulting with some errors. Can u please tell me which files r needed to present in that directoty where i want to decompress with cmd command?
Thanks

Carldric Clement 17-02-2022 09:17

Quote:

Originally Posted by Shaer (Post 495825)
Hi there !
i'v compressed some data with Mini Compressor v21.4e Stable with msx method. Now i need to decompress it using cmd command. but every attempt i try resulting with some errors. Can u please tell me which files r needed to present in that directoty where i want to decompress with cmd command?
Thanks

Unfortunately, some other precompressor wasn't able to fix that with cmd. Use Self-Extract on Mini Compressor itself. :)

allgravy 17-03-2022 01:17

Thank you
 
Thank you

Carldric Clement 17-03-2022 02:28

Quote:

Originally Posted by allgravy (Post 496224)
Thank you

Okay?

Carldric Clement 15-05-2022 06:07

Mini Compressor AIO v21.5f - Stable Released

Changelog: here

Source code is updated on github. here

Go check it out. :D

Carldric Clement 19-09-2022 10:51

Mini Compressor AIO v21.6g - Stable Released

Changelog: here

Source code is updated on github. here

Go check it out. :D

animussavior 23-09-2022 04:42

Archive Header Is Corrupt
 
i use this settings with Mini Compressor AIO
lolz:dmo0:dto0:mc32:mtb16m:mt4:mtt1:tt1:fba4096

and using Windows Phone Script
but the installer giving me archive header is corrupt unarc.dll returned an error code 14
Error: archive structure corrupted (descriptor failed CRC check
is there any solution ?

Carldric Clement 26-09-2022 19:36

Quote:

Originally Posted by animussavior (Post 498425)
i use this settings with Mini Compressor AIO
lolz:dmo0:dto0:mc32:mtb16m:mt4:mtt1:tt1:fba4096

and using Windows Phone Script
but the installer giving me archive header is corrupt unarc.dll returned an error code 14
Error: archive structure corrupted (descriptor failed CRC check
is there any solution ?

check the cls_lolz.dll and cls-lolz_x64.exe file if there exist.
if not copy from Mini Compressor > Resources > ISDone_resource
and paste to your ISDone from Windows Phone Script.

Also ask here to get how to add line to make support with lolz.

kj911 30-10-2022 11:38

1 Attachment(s)
Quote:

Originally Posted by gozarck (Post 486117)
nice tool. Can u add lrzip ? also u can test if u want.
bye :)

Its my, not fully tested v0.631 package. Cygwin's variants copy. Not easy find the correct dll's its to running, the lrzip executable. This x86 version. x86_64 (v0.631) exe not working these dll's. This lrzip.exe halfly running from Win XP. Minimum correct Windows version, its probably Win Vista or 7 or Win7 SP1.

gozarck: Checked arc.ini "lrzip" sections: What the -vvf commands?

My tests, its recommended disabling the LZO incompressibility test feature, with use any internal compression, extremely expanding processing time.

example: -z -T -p 2

This understood switches: -N aka nice value. This affect the CR ratio or speed?? Or any? Value: -20...19

Carldric Clement 01-12-2022 22:15

Mini Compressor AIO v21.7h - Stable Released

Changelog: here

Source code is updated on github. here

Go check it out. :D

Carldric Clement 10-01-2023 22:26

3 Attachment(s)
This is would be a next-gen FMX Animation on Mini Compressor with CIU Designer. Stay tuned. :)

Carldric Clement 20-01-2023 01:39

Mini Compressor AIO v21.8i - Stable Released

Changelog: here

Source code is updated on github. here

Go check it out. :D

Carldric Clement 28-01-2023 02:06

Mini Compressor AIO v21.9j - Stable Released

Changelog: here

Source code is updated on github. here

Go check it out. :D

Carldric Clement 18-03-2023 07:25

Mini Compressor AIO v21.10k - Stable Released

Changelog: here

Source code is updated on github. here

Go check it out. :D

Celestosapien 16-09-2023 23:57

Bro 21.10k is saying virus on windows 11.
I don't know a lot about security so just asking the opinion of experts here.
What could cause this.

Carldric Clement 11-10-2023 21:31

Quote:

Originally Posted by Celestosapien (Post 502521)
Bro 21.10k is saying virus on windows 11.
I don't know a lot about security so just asking the opinion of experts here.
What could cause this.

Trigger as false positive. Just make sure you exclude the folder Mini Compressor. :)

Carldric Clement 14-11-2023 10:53

Mini Compressor has been moved to GitHub. Here.

It will no longer update this thread. Thank you guys.

kj911 15-11-2023 04:13

1 Attachment(s)
This internal FreeArc Recovery records compatible with any externals compressors? Adding a very large percentage or dedicated size recovery record to the archives is against the spirit of competition when repackagers are trying to achieve the smallest possible size.

Last FreeArc supported very tiny 0.01% recovery records adding the archive. (Negligible size, even for large repacks.) See the attached picture.

It is worth reading this, written by Bulat, and also the explanation linked in the first post of the topic, regarding the XZ/LZMA2: https://encode.su/threads/2631-Xz-fo...ll=1#post50780

Carldric Clement 15-11-2023 04:55

Quote:

Originally Posted by kj911 (Post 502918)
This internal FreeArc Recovery records compatible with any externals compressors? Adding a very large percentage or dedicated size recovery record to the archives is against the spirit of competition when repackagers are trying to achieve the smallest possible size.

Last FreeArc supported very tiny 0.01% recovery records adding the archive. (Negligible size, even for large repacks.) See the attached picture.

It is worth reading this, written by Bulat, and also the explanation linked in the first post of the topic, regarding the XZ/LZMA2: https://encode.su/threads/2631-Xz-fo...ll=1#post50780

No, I haven't tried yet since the person requested to make that FRR for Mini Compressor on the GitHub issues.

bytes 06-05-2025 00:06

Quote:

Originally Posted by Carldric Clement (Post 502919)
No, I haven't tried yet since the person requested to make that FRR for Mini Compressor on the GitHub issues.


guys i am new to repack games, i saw xtoll etc things which is console so i found this tool as this is gui, i download mini compressor from github and using freearc, split files option pics attached it gives me exe not found error

https://i.postimg.cc/tgjN395v/1.jpg

https://i.postimg.cc/mDZ3nVKQ/2.jpg

dont know whats wrong, opening run_fa.bat has this

Quote:

@echo off
title Mini Compressor v2024.07.08 - Compressing...
"" a -ma9 -ds -di -i1 -ep1 -ed -r -s; -w_Temp\ -lc1024 -ld1024 -mmsc+static2+lzma+diskspan:650m:650m "C:\Games\OUT\File1.arc" "C:\Games\Cricket 24\*"

LUISgamerX 20-05-2025 18:14

Translate.txt in spanish
 
1 Attachment(s)
Mini Compressor - Translate.txt in spanish :)

drzmx 16-11-2025 05:54

hi there, I have a problem making a installer for 32bits machines, at first it says it cannot start cls-srep x86 an cls-lolzx86, of course I put the proper executables in Isdone support, but the decompresion fails anyway, saying it cannot write in the disk, any idea?

kj911 16-11-2025 07:11

drzmx: Not a valid Win32 application or "Can't open read file mapping" errors?

First easily solve the linked applications.

Use this: "MakeXP-x86.exe" cls-lolz_x86.exe from patching executables/dll files running from XP.

drzmx 16-11-2025 07:57

no, it can execute and starts decomprension, even can decompress some files, and it just fails, this only happens in x86, in a x64 system it installs fine https://ibb.co/W4VqXqHc

Carldric Clement 16-11-2025 08:22

Quote:

Originally Posted by drzmx (Post 508893)
no, it can execute and starts decomprension, even can decompress some files, and it just fails, this only happens in x86, in a x64 system it installs fine https://ibb.co/W4VqXqHc

What kind installer you're using onto?

drzmx 16-11-2025 13:16

Quote:

Originally Posted by Carldric Clement (Post 508894)
What kind installer you're using onto?

I'm using Installer creator V3.1 , the one that is include in the minicompressor

Carldric Clement 19-11-2025 10:58

Quote:

Originally Posted by drzmx (Post 508898)
I'm using Installer creator V3.1 , the one that is include in the minicompressor

I need to know what method FreeARC are you using with?

drzmx 19-11-2025 17:52

Quote:

Originally Posted by Carldric Clement (Post 508908)
I need to know what method FreeARC are you using with?

I'm using this method https://ibb.co/0VYspnHK

Masquerade 22-11-2025 03:35

Don't use XLolz, LOLZ is natively multithreaded so XLolz is redundant.

Carldric Clement 23-11-2025 05:45

Quote:

Originally Posted by drzmx (Post 508910)
I'm using this method https://ibb.co/0VYspnHK

What about installer creator to external archive?

drzmx 23-11-2025 06:29

Quote:

Originally Posted by Carldric Clement (Post 508931)
What about installer creator to external archive?

idk, i need to test it out

Carldric Clement 24-11-2025 05:09

1 Attachment(s)
Quote:

Originally Posted by drzmx (Post 508932)
idk, i need to test it out

are you sure that you didn't mistake everything?

drzmx 27-11-2025 15:53

Quote:

Originally Posted by Carldric Clement (Post 508938)
are you sure that you didn't mistake everything?

pretty sure, the error only appear in X86 OS, in x64 it decompress and install FINE, i use the external media, with same results


All times are GMT -7. The time now is 10:45.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
FileForums @ https://fileforums.com