Please Razor, Sir, Mentor

Please Add 0.43 Precomp Support

I am now compressing using compressor 2.1

precomp 0.42

I hope it compress just like 0.43

This is the reason I did not add precomp043, It's because of this.

Precomp 4.2 with compressor v2.1 also not working

and why you dont add support please sir

help me

decompression failed error

You're missing the point of precomp. Precomp must not compress the file, in fact, to get good results, the output must beca lot bigger than the input, it even says that in the readme file that came with the exe. If precomp makes the result smaller than input, then do not expect results. I set precomp 0.38 as default for a reason, it does the job perfectly, the output is always bigger than input, unlike the new precomps (041, 042, 043). Precomp 043 will not work just like that, it's complicated, that's why it isn't added on most of my programs, you have to update cls-precomp.dll, you have to inject dll or something like that to make it work, another problem, you don't just use precomp for all files, check the readme or use trial and error because sometimes the final results are even better when you didn't use precomp.
Here's proof:

Input was 10mb.
Precomp038 made it 27mb
Precomp040 made it 27mb
Precomp041 made it 3.3mb
Precomp042 made it 3.3mb
Precomp043 made it 3.3mb

I used a strong compressor from the work of precomp, I used 7-Zip Solid LZMA2.
For precomp038 27mb became 2.5mb
For precomp040 27mb became 2.5mb
For precomp041 3.3mb became 3.3mb
For precomp042 3.3mb became 3.3mb
For precomp043 3.3mb became 3.3mb

It works here, I downloaded the attachment from first thread, applied update too then compressed, msc+precomp+srep+lzma, I testdled 0.38 and 0.42 with or without jpg compression, still works without errors.

That's really interesting, thx to your explanation I now understand how it really work :)

So Can You Tell Me Some Best methods of repacking

I Am Using Packjpg.

Is It Causing The Issue

I have it setup exactly as you said and it is not working same error as before...Maybe I have messed up somewhere else...Let me give a little bit more detail...

So I have script setup as you said.
On cd 1 I have:
Start.exe
autorun.ini
Redist --> with all redists inside
Data-1.bin --> compressed with:

arc a -lc8 -ep1 -ed -r -w.\ "Data.bin" -msrep+lzma:a1:mfbt4:d158m:fb273:mc1000:lc8 "D:\compress\*"

Cd 2 is the same only that I have Data-2.bin

And also what exactly is Setup-1.bin, I get only 1 for 2 cds... I probably messed up somewhere here.

Thanks in Advance!

Show the picture of the error.

messed up this part or you typed it wrong

arc a -lc8 -ep1 -ed -r -w.\ "Data.bin" -msrep+lzma:a1:mfbt4:d158m:fb273:mc1000:lc8 "D:\compress\*"

Data.bin -> Data-1.bin

Oh yea sorry for that. I rename the compressed bin afterwards and I have double checked.

As for the error
https://imagizer.imageshack.us/v2/32...538/RFCBnr.png

Oh btw Razor I know you said it is an internal error and will get fixed...but I assumed it got fixed after the update so I just wanted to make sure.

If i click ignore it gives an error for half of the other files in the folder include and when it is through it does not extract second bin. I found out that if i insert disk 1 setup finishes but that way it does not extract second bin

Just uploaded a solution for your problem. Check main post.

Game Uninstall problem in script

Just add this in the script and it fill be fixed :

Thanks! But it still kinda does not work... I am definitely doing something wrong. When I insert dvd 2 it does not extract it it skips directly to redists but gives no error.

Cd1:
Redist
autorun.ini
Setup-1.bin
Start.exe
Data-1.bin

CD2:
Redist
Autorun.ini
Setup-1.bin
Start.exe
Data-2.bin

Something is definitely wrong on my side and since i am no expert in this I blame the cd2... There has to be a setup-2.bin or doesnt it?

Sorry for your time!!!

Thanks in Advance!!!

I will try to fix it again.

Having This Issue! I repacked This Game Everything Working Fine Installation Work Fine and Now My Friend Try It. It Gives THis error and I Tried it Again it is giving error

In C drive 90 GB is Free

Judging the look of the picture, it seems to run in sandboxed environment. If so, that's why it fail, most of AV sandbox protection block dll extractions. You can also check if AV do not quarantine/delete extracted resources, for example AVAST automatically block nz64.exe because it's detected as generic malware.
Last, check windows UAC, it may block resources decompression too.

I didnot Used Any AV

but my UAC is enabled

UAC cause any prob in windows or what is its purpose

What the... !?? Seriously!?
In 2015 there is still people who don't use AV...incredible...and horrific...

I cannot help you, without any AV your PC is probably full of viruses/malwares that can prevent the setup from working as intended...

My recommandation : DO NOT save any files (probably infected), full format your PC, make clean reinstall and INSTALL AV. I'm sure at 99.99% it will solve your issues.

Having an AV is not almighty of course, but it's the very least you must have on Windows PC...

Yeah I Completely Reinstalled the windows now AV is on too

then again problem same error

i have again repacked but same error

i have tried disabling AV then also same error

Did you used Compressor 2.2 to make your archives ?

-- EDIT --
Are you serious ??!
You did not credit Razor for his work...Don't expect any help now...corepack, what a (bad) joke...

Yes Well Its 2.1 not 2.2

because i cant find 2.2 on this forum

i downloaded that and it extract as 2.1

I understand your frustration and disappointment but don't give these rip offs free advertising by mentioning their site. Trust me I do find it amusing that these so called 're-packing ripoffs' shoot their mouths off at how good they are at repacking but still have to rely on Razor and others for all their work. ;)

Sorry toto, I had to remove the link. ;)

@Grumpy
That's the reason I don't respond to some posts, PMs and adding copyright to my projects. They made it personal, especially the guys from the link you removed.

Scrip: mertderler graphic: mertderler :D

http://i.hizliresim.com/gA9bX0.jpg

@Grumpy: sorry about the link, I was surprised and angry, I didn't thought about unwanted advetising aspect...my bad...

@Razor: I understand your frustration now, this dumbass forgot to change the picture link, when I saw corepack in the link I remembered one of your PM so I checked their website...it's full of your stuff, zero credits...

Anyway, they are a minority while many people here (including me) respect your work :)

He's not CorePack btw,

What did you just say ? NO CREDITS ? Do you even know one thing ?? All of CorePack's installer comes with "Razor12911" watermark in them. And Razor12911 is a VIP on their forum, don't say that Razor12911 wasn't credited. Other peoples don't credit Razor12911 for his amazing work, they just use his stuffs. But CorePack do write Razor12911 name on their installers as watermark, check below :-

http://i.imgur.com/BYJTuAf.png

Got it ?

First of all, he's not a repacker of CorePack so don't divert everything directly to CorePack, "ShivShubh" is the main repacker there, And yes its full of Zee's installer, just installer, but not the repacks they have made. I really respect Zee and his work, he has done many unique work here.

I just don't know how without even checking you people started to say that CorePack never credited Zee. I am ShivShubh's friend. Before starting CorePack team, ShivShubh even told Zee that he's not like others who steal work and so he will put his name on CorePack's installer and so he did. Zee and ShivShubh are friends, you can just ask Zee about it.

how to add Binaries\Win32 \ exe in WPI

right in the script itself

IF the Directory was Binaries\Win32 then it would look like this

Corepack respect Razor and give him all the credit check every work his name always honored

Please fix this caption for spanish language

http://i.imgbox.com/yaD8plJT.png

The version WPI_No_Lock (08-13-2015) It is on par Update 2, I mean if it is based on this version WPI_v3.1_UPDATE2.

spanish.isl corrected. WPI_No_Lock.iss Customized Spanish language.

ONLY LEFT THE TOP CAPTIONS

http://i.imgbox.com/yaD8plJT.png

Sir Installer Is Great
 

First Of All Thankyou Sir, Your Installer Is Soooo Much Great

and i just got mad when i saw it

i just wanted to know is there any way to change the disk space needed MB to GB..

why so easy to convert... 3.56GB --> 3560 MB not necessary to change script, beside what would you do if game is less then 1GB ?? how will you enter that then.

i would be better with the MB and the GB in brackets...

Its Not The Problem Of Conversion.. Is There Any Way

for less than 1 we can write 0.6 GB...

Can You Help