FileForums
Page 58 of 62 « First 8485657 58 5960 Last »
Show 40 post(s) from this thread on one page

FileForums (https://fileforums.com/index.php)
-   Conversion Tutorials (https://fileforums.com/forumdisplay.php?f=55)
-   -   [CIUv3] Custom Installer Ultimate v3 (https://fileforums.com/showthread.php?t=102510)

Cesar82 05-01-2023 18:39
Quote:
Originally Posted by KaktoR (Post 499684)
@César

Code:
[ProgressBarSI]
//Width=0                        // integer              (Default = SmallInstaller >> Width - 30)
Could you change this to "Default = SmallInstaller TextWidth"? This is the case with [ProgressBar], where this is correct in my opinion.
I think it's already like this, see:
Code:
  SIProgressGauge := TNewProgressBar.Create(WizardForm);
  with SIProgressGauge do begin
    Parent := WizardForm;
    Left := GetValInt('ProgressBarSI', 'Left', GetValInt('SmallInstaller', 'TextLeft', 15)) + GetValInt('ProgressBarSI', 'MoveX', 0);
    if SIProgressVertical then
    begin
      Top := GetValInt('ProgressBarSI', 'Top', GetValInt('SmallInstaller', 'TextTop', 15)) + GetValInt('ProgressBarSI', 'MoveY', 0);
      Width := GetValInt('ProgressBar' + IfThen(IsSectionEmpty('ProgressBarSI'), '', 'SI'), 'Width', 14);
      Height := GetValInt('ProgressBarSI', 'Height', GetValInt('SmallInstaller', 'TextHeight', GetValInt('SmallInstaller', 'Height', 220) - 30));
      SetWindowLong(Handle, GWL_STYLE, GetWindowLong(Handle, GWL_STYLE) or PBS_VERTICAL);
      SetWindowPos(Handle, 0, 0, 0, 0, 0, SWP_FRAMECHANGED or SWP_NOZORDER or SWP_NOSIZE or SWP_NOMOVE);
    end else
    begin
      Top := GetValInt('ProgressBarSI', 'Top', GetValInt('SmallInstaller', 'TextTop', 15) + 65) + GetValInt('ProgressBarSI', 'MoveY', 0);
      Width := GetValInt('ProgressBarSI', 'Width', GetValInt('SmallInstaller', 'TextWidth', GetValInt('SmallInstaller', 'Width', 500) - 30));
      Height := GetValInt('ProgressBar' + IfThen(IsSectionEmpty('ProgressBarSI'), '', 'SI'), 'Height', 14);
    end;
    Min := 0;
    Max := 1000;
    Position := 0;
    if CustomCursor then
      OldCursor := SetClassLong(Handle, GCL_HCURSOR, NewCursor);
    Visible := False;
  end;
Code:
Width := GetValInt('ProgressBarSI', 'Width', GetValInt('SmallInstaller', 'TextWidth', GetValInt('SmallInstaller', 'Width', 500) - 30));

GetValInt('SmallInstaller', 'Width', 500) - 30
This will only be used if [SmallInstaller] TextWidth= does not exist.
If the key Width does not exist it will be 500.

Default To ProgressBarSI WIDTH === read ini:  ProgressBarSI/Width << SmallInstaller/TextWidth  << SmallInstaller/Width-30 << 500-30

KaktoR 06-01-2023 04:14
Thanks for info.

-30 is left + right, so overall it is -60 then? Or -15 from both sides?

Example: SmallInstaller is 500, ProgressBarSI is 440 or 470 then?

Cesar82 06-01-2023 04:26
Quote:
Originally Posted by kaktor (Post 499690)
thanks for info.

-30 is left + right, so overall it is -60 then? Or -15 from both sides?

Example: Smallinstaller is 500, progressbarsi is 440 or 470 then?
-(15+15)

470

andreiutzu21 22-01-2023 11:31
CIU 3.0.0.1 b9 u4 BUG
 
2 Attachment(s)
i have found 2 bugs with last update. see atached images. thanks

Cesar82 22-01-2023 14:53
2 Attachment(s)
Quote:
Originally Posted by andreiutzu21 (Post 499935)
i have found 2 bugs with last update. see atached images. thanks
The bugs must be from before the last version.
Thanks for reporting.

Here it works, see the attached video.

@andreiutzu21 please test attached setup file and report if bug continue.

andreiutzu21 22-01-2023 22:52
hi @Cesar82 in your Setup on my desktop it shows correct VRAM and disk space without that dot but on my laptop not showing correct VRAM memory 3 GB instead of 4GB. but if you remember same problem was with CIU 3.0.0.1 b9 u1 and was fixed. i have used last night that script and everything was ok including UWP games VRam memory and that dot. i will do same test with this last update of CIU. thank you for your time and hard work

Cesar82 23-01-2023 01:19
Quote:
Originally Posted by andreiutzu21 (Post 499939)
hi @Cesar82 in your Setup on my desktop it shows correct VRAM and disk space without that dot but on my laptop not showing correct VRAM memory 3 GB instead of 4GB. but if you remember same problem was with CIU 3.0.0.1 b9 u1 and was fixed. i have used last night that script and everything was ok including UWP games VRam memory and that dot. i will do same test with this last update of CIU. thank you for your time and hard work
What about UWP games?

If possible, test with old versions of the script, and if any don't have the bug, let me know which version the bugs came from.
Thanks!

andreiutzu21 23-01-2023 07:25
Ciu bug
 
2 Attachment(s)
hi again @Cesar82 i have done some tests and i have atached some files. if you need more test let me know. thanks

Cesar82 23-01-2023 09:31
Quote:
Originally Posted by andreiutzu21 (Post 499953)
hi again @Cesar82 i have done some tests and i have atached some files. if you need more test let me know. thanks
@andreiutzu21...
1) You didn't tell me if the setup.exe attached to my previous post contains the deimal point bug in the labels "0." (required size on disk).

2) If possible let me know which script prior to b9.u1HF6 had the bug.
I think maybe it had the bug up to b9.u1HF2 and it was fixed in HF3. Confirm that this is the case.

3) If possible see which version after b9.u1HF6 the bug appeared again.

For me, everything works here, so it's difficult to analyze without you giving me the results.
If you prefer, send me a PM so as not to pollute this topic too much.

I'll see your attachment text file now. Ignore questions you have already answered.
Thanks!

andreiutzu21 23-01-2023 10:01
Quote:
Originally Posted by Cesar82 (Post 499954)
If possible let me know which version prior to hf6 contained the bugs.
i think this bug started with CIU 3.0.0.1 b9 u2 HF2 from 11.09.2021 but with last HOTFIX was realy ok

Cesar82 23-01-2023 11:32
@andreiutzu21, let me know if the dot is displayed when unchecking the components (like: 0. MB) in the setup.exe file attached HERE and let me know.

andreiutzu21 23-01-2023 11:46
2 Attachment(s)
Quote:
Originally Posted by Cesar82 (Post 499956)
@andreiutzu21, let me know if the dot is displayed when unchecking the components (like: 0. MB) in the setup.exe file attached HERE and let me know.
the dot is not there after the 0 but at VRAM is the same it shows 3 gb instead of 4

Cesar82 23-01-2023 12:17
Quote:
Originally Posted by andreiutzu21 (Post 499957)
the dot is not there after the 0 but at VRAM is the same it shows 3 gb instead of 4
That VRAM without problem.

THE STORY:
The CIU formerly at the time of Yener90 used the get_hw_caps.dll library to detect hardware.
As some functions stopped working with this library after the release of new versions of windows, the CIU started to use the ISSysInfo.dll library (by petef1999).
However, after the emergence of GPUs with VRAM greater than 4 GB, this library began to not correctly detect the VRAM of these GPUs.
Then I searched for efficient hardware detectors for VRAM, until in "CIU 3.0.0.0_b9.u1.HF6" I made my own version in the CIU script itself getting the values in the windows registry, but using the same ISSysInfo library .dll to read GPU name
But that wasn't so efficient because as you commented the labels were smaller on "CIU 3.0.0.0_b9.u1.HF6" (see it has 2 video card names).
What happens is that in idle mode, current laptops turn off the dedicated video card using only the integrated Intel HD Graphics card.
So after that in "CIU 3.0.0.0_b9.u2" Razor12911 helped me by improving a code which he himself had shared in the debate about not having a functional VRAM detect code so that this code would not only detect Namee VRAM of all GPUs and generate a list. Now it ordered and returned only the highest VRAM value (a logic because the dedicated card would probably always have the highest VRAM).
So I inserted Razor12911's code into CIULib.dll trying to make the VRAM check faster than the script itself using my code.

Now I perfected my script code to not only get the largest VRAM, but also read the name of the current GPU that has the largest VRAM size (I hope it's not slow).
I will send you a PM soon with test file.
If possible send me by PM the original captured images of your previous post b9.u1.HF6 (the labels are illegible).
Thanks.

Proxson 26-04-2023 16:29
It's me again. :p ;)

Ok, after a while...ermm....cough.... I have noticed some non logical steps in the installation process. It's about the Customize and Next option at the first setup window/page whatever. If you choose Customize then you go through the steps like EULA page, info page, hardware requirements page etc. That's ok but if you choose directly the Next button then the installation promptly begins. Here comes the non logical part. If there is an EULA and by not accepting it, you can't proceed with the installation which is on the other hand bypassed when Next (prompt) is chosen. Long story short, the EULA page and info page should appear in both ways, no matter what you choose. This should be fixed by all means. Thanks guys for your great work btw. Cheers.

Something like this:

Customize --> EULA (if there) --> Info (if there) --> Hardware requirements --> Components --> Tasks --> Installation path --> Prerequisites --> Install

or

Next --> EULA (if there) --> Info (if there) --> Hardware requirements --> Install

Cesar82 26-04-2023 17:16
Quote:
Originally Posted by Proxson (Post 500956)
It's me again. :p ;)

Ok, after a while...ermm....cough.... I have noticed some non logical steps in the installation process. It's about the Customize and Next option at the first setup window/page whatever. If you choose Customize then you go through the steps like EULA page, info page, hardware requirements page etc. That's ok but if you choose directly the Next button then the installation promptly begins. Here comes the non logical part. If there is an EULA and by not accepting it, you can't proceed with the installation which is on the other hand bypassed when Next (prompt) is chosen. Long story short, the EULA page and info page should appear in both ways, no matter what you choose. This should be fixed by all means. Thanks guys for your great work btw. Cheers.

Something like this:

Customize --> EULA (if there) --> Info (if there) --> Hardware requirements --> Components --> Tasks --> Installation path --> Prerequisites --> Install

or

Next --> EULA (if there) --> Info (if there) --> Hardware requirements --> Install
Thank you for your opinion.

This FAST mode is used since the original project that Yener90 created, so I didn't want to change it.

You can let your installers behave without this FAST mode (So it will always show the license).
For that, try using EnableFastInstall = 0 in the [InterfaceSettings] section.

If more users find the requested behavior better, I change it.
But I particularly prefer a FAST mode as is (Perhaps with an additional ready page (not currently supported) to know what is being installed and where, like components, tasks, directory, etc.).

Perhaps a solution would be to put an additional key to activate the behavior mode you suggested.
What do you think?


All times are GMT -7. The time now is 03:48.
Page 58 of 62 « First 8485657 58 5960 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
FileForums @ https://fileforums.com