FileForums
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

FileForums (https://fileforums.com/index.php)
-   Conversion Tutorials (https://fileforums.com/forumdisplay.php?f=55)
-   -   Universal Accelerator - cls-mtx.dll (https://fileforums.com/showthread.php?t=103664)

Cesar82 14-09-2020 09:21
Quote:
Originally Posted by BLACKFIRE69 (Post 487937)
for cls-mtx:

[External compressor:bcm]
header = 0
packcmd = Res\Bcm compressor\{compressor} -9 $$arcdatafile$$.tmp $$arcpackedfile$$.tmp[/CODE]
I understand what you said, but it would be useful to be able to use it as used in arc.ini for other compressors that do not use CLS-MTX.dll.

Currently in CIU it uses this configuration mode that allows the user to inform the command in more than one way.
Code:
[External compressor:rz,RZ,razor,RAZOR]
header    = 0
packcmd  = "RAZOR\RZ_x64" a -y -d {option} $stdio$ <stdin> <stdout>
unpackcmd = "RAZOR\RZ_x64" e -y $stdio$ <stdin> <stdout>
For 32-bit version the executables are "RZ_x86.exe"

If possible, it would be very useful to be able to configure this way (in the next update of CLS-MTX.dll).
It also needed to allow the use of compressors without the CLS-MTX, such as using for mtx: [External compressor: mtxrz, mtxrazor, mtx_razor, mtx_rz]
and for RAZOR norml to use [External compressor:rz,RZ,razor,RAZOR]
This same name variation would be used for other executables like mpzapi and perhaps some others.

BLACKFIRE69 14-09-2020 10:04
Quote:
Originally Posted by Cesar82 (Post 487942)
I understand what you said, but it would be useful to be able to use it as used in arc.ini for other compressors that do not use CLS-MTX.dll.

Currently in CIU it uses this configuration mode that allows the user to inform the command in more than one way.
Code:
[External compressor:rz,RZ,razor,RAZOR]
header    = 0
packcmd  = "RAZOR\RZ_x64" a -y -d {option} $stdio$ <stdin> <stdout>
unpackcmd = "RAZOR\RZ_x64" e -y $stdio$ <stdin> <stdout>
For 32-bit version the executables are "RZ_x86.exe"

If possible, it would be very useful to be able to configure this way (in the next update of CLS-MTX.dll).
It also needed to allow the use of compressors without the CLS-MTX, such as using for mtx: [External compressor: mtxrz, mtxrazor, mtx_razor, mtx_rz]
and for RAZOR norml to use [External compressor:rz,RZ,razor,RAZOR]
This same name variation would be used for other executables like mpzapi and perhaps some others.

all right then. i'm working on it. :D

(i've a few exams in the coming days. so it may not be quick. :o)

BLACKFIRE69 14-09-2020 16:38
cls- mtx Update
 
cls- mtx Update v2.0.0.5




New update for "cls-mtx".




What's New:
  • "{Compressor}" is no longer required.
  • Can use more than one name.
  • Known issues have been resolved.
  • Please use (") for directories with spaces.


New Arc.ini (or any config.ini):

Code:
[External compressor:mtx_rz, mtx_razor, mtxrz]
header    = 0
packcmd  = "Res\Rz Compressor\rz64.exe" a -d 128m $$arcpackedfile$$.tmp $$arcdatafile$$.tmp
unpackcmd = "Res\Rz Compressor\rz64.exe" e -y $$arcpackedfile$$.tmp $$arcdatafile$$.tmp

Inputs: (that supports)
Code:
1. $$arcdatafile$$.tmp
2. <stdin>

Outputs: (that supports)
Code:
1. $$arcpackedfile$$.tmp
2. <stdout>

Masquerade 15-09-2020 10:34
@BLACKFIRE69

I have messaged you my setup, I copied the line from your SetIniString example but it does not work.

Maybe a second pair of eyes to look could really help.

It's on line 1950

BLACKFIRE69 15-09-2020 13:03
Quote:
Originally Posted by Masquerade (Post 487959)
@BLACKFIRE69

I have messaged you my setup, I copied the line from your SetIniString example but it does not work.

Maybe a second pair of eyes to look could really help.

It's on line 1950
ok, check the inbox. :p

BLACKFIRE69 16-09-2020 06:43
cls-mtx New Update
 
cls-mtx New Update v2.0.0.6




What's New:
  • Some improvements.
  • Minor issues fixed.
  • Not case sensitive as before. :p



and i was able to reduce the final size from "191 kb" to "100 kb". :D


_

Masquerade 16-09-2020 13:01
@BLACKFIRE69

Thank you for the update, however a huge bug has been introduced. Nothing has changed in my arc.ini since I added the new version to my compressor:

Code:
Compressed 119 files, 13,245,186,961 => 1,672 bytes. Ratio 0.00%
Compression time: cpu 14.33 sec/real 483.57 sec = 3%. Speed 27.39 mB/s
All OK
Using method: mtx:c64m:t16:rz

The folder being compressed is ~700MB and sometimes it says all 700MB becomes 1kb, other times like the above it only recognises some of the data.

BLACKFIRE69 16-09-2020 14:20
2 Attachment(s)
Quote:
Originally Posted by Masquerade (Post 487971)
@BLACKFIRE69

Thank you for the update, however a huge bug has been introduced. Nothing has changed in my arc.ini since I added the new version to my compressor:

Code:
Compressed 119 files, 13,245,186,961 => 1,672 bytes. Ratio 0.00%
Compression time: cpu 14.33 sec/real 483.57 sec = 3%. Speed 27.39 mB/s
All OK
Using method: mtx:c64m:t16:rz

The folder being compressed is ~700MB and sometimes it says all 700MB becomes 1kb, other times like the above it only recognises some of the data.

no. it works without problems.
more details plz. what about my example compressor?
or send me related files.

Masquerade 17-09-2020 00:51
@BLACKFIRE69

Yes with your compressor it works, but I did not change a single config between last time I used MTX and this time.

Perhaps I should fully remake my compressor and tidy things up? I'll get back to you after I try sort it.

Sorry for wasting your time...

Edit: I have mailed you an example compressor, I tried rewriting 3 times but it keeps returning <1KB files :(

BLACKFIRE69 17-09-2020 06:55
Quote:
Originally Posted by Masquerade (Post 487979)
@BLACKFIRE69

Yes with your compressor it works, but I did not change a single config between last time I used MTX and this time.

Perhaps I should fully remake my compressor and tidy things up? I'll get back to you after I try sort it.

Sorry for wasting your time...

Edit: I have mailed you an example compressor, I tried rewriting 3 times but it keeps returning <1KB files :(

ok, check my answer i solved your problem. ;)

and guys, since v2.0.0.5, the keyword "{compressor}" is no longer supported on arc.ini. please see the example.

BLACKFIRE69 27-09-2020 10:47
Update



What's new:
  • Bringing back "{compressor}".
    - Added support for "{compressor}" as before.



* cls-mtx supports two methods.

Code:
1: The simple way

[External compressor:precomp, mtxprecomp, mtx_precomp]
header    = 0
packcmd  = "Res\Precomp\precomp.exe" -cn -intense0 -o$$arcpackedfile$$.tmp $$arcdatafile$$.tmp
unpackcmd = "Res\Precomp\precomp.exe" -r -o$$arcdatafile$$.tmp $$arcpackedfile$$.tmp

Code:
2: Alternative method

[External compressor:precomp, mtxprecomp, mtx_precomp]
header    = 0
packcmd  = "Res\Precomp\{compressor}" -cn -intense0 -o$$arcpackedfile$$.tmp $$arcdatafile$$.tmp
unpackcmd = "Res\Precomp\{compressor}" -r -o$$arcdatafile$$.tmp $$arcpackedfile$$.tmp


and the exe name must be "precomp.exe" (similar to the first one in section names.)

dixen 30-09-2020 07:14
Test

Left 4 dead 2 2.2.0.1

*.WAV (srep+mtxrz)

Quote:
Tested 47,599 files, 4,218,328,066 => 9,937,777,119 bytes. Ratio 42.45%
Testing time: cpu 8.50 sec/real 82.11 sec = 10%. Speed 121.03 mB/s
All OK

BLACKFIRE69 02-10-2020 06:49
cls-mtx October Update
 
cls-mtx October Update v2.0.0.7




What's new:
  • Fixed a minor issue..
    - Fixed an issue that related to the working directory.

kj911 12-07-2022 09:57
Any members tested the accelerator, using DLZ compressor in multi-core PC's?? (x86 or x64 and more CPU cores 2/4 to 8-16)

Masquerade 12-07-2022 10:02
Quote:
Originally Posted by kj911 (Post 497594)
Any members tested the accelerator, using DLZ compressor in multi-core PC's?? (x86 or x64 and more CPU cores 2/4 to 8-16)
Don't use DLZ. LOLZ is superior + has built in mulithreading.


All times are GMT -7. The time now is 12:42.
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
FileForums @ https://fileforums.com