Hi, I want to leave the Spanish archives because that is the language I want. Now you tell me that deleted files sfx sound and put the English files ?. Some have all these file sfx sound, belongs to those files ?. He said that the conversion makes me 10 dvds. Thank You

yes you leave the Spanish sound files BUT also have to leave the English as well.
and it will increase to 10dvds because of the extra language files.

You can not just leave Spanish?

See the screen

try it & see. are you using the cracked verison ?

Yes, I have the version 1.5 and creack reload. The only way the game is run with sfx sound files. Now I have another problem that throws the ultraarc. What is the solution. Thank You

redownload the files from first post, your using an old version & it caused those issues.

Yesterday download it, are not the same files?

sorry had a moment :o

check first post & download the new 2400 version of UA. Move the Unity_
folder from the old version into the new one, then run it. It should work without issues.

same error "Failed to create Data1.cab Process stopped at: 01:09:22 p.m."

change your output folder. Make a ACU_Temp folder on C & put that as your Output folder rather then desktop.

If you have another HD / partition then use that is even better. Not a good idea if at all possible to have temp & game on same partition. But some people have no choice.

Turn off your antivirus during the compression process too.

I did everything, turn off antivirus, tried to disk c and d, still the same error, I have over 170gb free, is happening, the first time I tried it worked well, not now. Which may be the error. Thank You

do you have any cab files in the unity folders ? if you do delete them, then restart conversion process.

I have nothing that can not be.

Hello, compile successfully achieved with spa and sfx sound files. What I did was delete the UltraARC.ini the line "FreeARC = SREP, delta, lzma" with "FreeARC =", then run ultraarc.exe, complete source and output and start. They were 9 folders and 10, I say if anyone else has problems or want to fix it. Thank You

:D:D good to hear you got it figured out & thanks for posting back results for others if they have issues. :cool:

Hello, now I have another problem. When I run the installer to test if well installed, give to install and do not spend more than three seconds that says finish the installation, you deoy to finalize and cuuando I see the game is not installed, it installs only the installer and nothing more, the game is installed, it can be. Thank You

what do you have for cab files in UNITY_ folders?

Yes, all data data1a.cab cab, data1b.cab, so each unit folder

Hello, already solved the problem, I went back to do the conversion and I am all right, the conversion remained on 7 dvd !!!, better than 9. Let me explain a little details that I had and how you perform to make it better .

1- Install Assassins Creed Unity
2- Update fully patched, 1.2-1.3-1.4-1.5 and apply crack, in this case 1.5
3- Remove the languages ​​that are not necessary, in my case I chose Spanish, but also had to leave the sfx sound files because the game no started, pulling mistake acu.exe stopped working. (Image1)
4- Download Unity Conversion_V2.rar the 2 parts and no video.
5- Remove Unity Conversion UltraARC.ini V2 and edit the file. In the line that says "FreeARC = SREP, delta, lzma" leave well "FreeARC =" and save the file. (Image2)
6- UltraARC.exe Run, go to options and tick SREP, delta and lzma. (Image3)
7- Choose source where it is installed Assassins Creed Unity, in my case "C: \ Program Files (x86) \ Assassin's Creed Unity"
8- Choose the folder where you extracted output "Unity Conversion_V2"
9- Give start. The compilation slow me like 4 hours to me, I have intel I5 4670, 8 gb ram, windows 8.1.
10- When finished removing all Unity_NovideoV2.rar, go to Unity_1 (the Unity_NovideoV2 folder) and copy all the files inside and replace those who are in the conversion, I mean "Unity Conversion_V2 / Unity_1".
11. Burn the iso from the folder or test if it works.

To me they left me 7 dvds with these sizes:

1- 4.37GB
2- 4.37GB
3- 4.37GB
4- 4.37GB
5- 4.37GB
6- 4.37GB
7- 3.21GB

The game is perfectly installed in many less dvds, and error free. I had to use file novideo because otherwise the dvd1 going to have 4.54gb not enter a DVD5. I hope this can serve them all. Greetings and thanks to pakrat2k2 for their contributions and help in my conversion. Greetings To You

glad you understood enough to finally get it converted

Thank you, if you want to test the conversion if you have also fits on 7 dvds. greetings To You

I downloaded all the same mistake again and the process starts and ends soon after.

When I try to unistall the game, the computer shows
Runtime Error (-1:0) Cannot import GameuxIntallHelper.dll

used V2 conversion files & moved unins* files out of game dir before starting conversion.
( all listed in first post )

I moved unins* files from game dir and I use UA 2400 to compress but nothing.
I have same problem.

check your original gamefolder for GameuxIntallHelper.dll if its there move it out of game folder as well. try again.

What difference does it make if I use rar5 + best and not freearc?

The Conversion uses UltraARC but you can choose to compress with WinRAR, from within UA, but have no clue as to what the differences will be in output.

As far as I can see it creates a data.cab. I think compression algorithm doesn't interfere with installation.

Unity_1 is slightly bigger than a dvd: 4.57 gb.

you can use WinRAR in the program but you still need to specify maximum size for first dvd

Ok, my mistake, I didn't set first dvd in path screen.
7zip should be better than rar, although freearc (that I am too lazy to download) should be faster in the process of compression.

The output should be the same, and for the normal user it's just clicking the setup.exe and installing.

Another question: is there any way to change data.cab name? Now I get data1a, data1b... I would like numerals as data1 data2 data3.

Edit: freearc is not included in rar packages, isn't? I don't have those options.

no that's the way UA works, & if you want freearc then you must install it.

Ah ok, thank you.

Then 7zip should do the trick. Unity_9 is 3.6 gb, so it must be everything (patch+dead kings), maybe I've missed some of the other DLCs.

There is a problem on uninstall though.

"Cannot import dll [...] GameuxInstallHelper.dll".

Anyone else having this problem? Is it normal?

you will have to recompress game, & add that file to exception list ( like unins* )
it must exist in original gamefolder & cant access it ( same file is used for uninstall in conversion )

Ok I will try another compression in full.

I wonder if it's the only dll with this problem though.

Can you explain what exception list do?
Does it mean it won't be included in my splitted archive and therefore not installed in new installation?

Freearc: I gave a try with "srep, delta, lzma" and it just quits at 10%.
Using freearc gives me an E.T.A. of 5 hours versus 2 hours of 7zip, I don't know why - even if would work for me with freearc, would it speed up installation later?

Here's my procedure:
- decompressing Unity Conversion_V2, with the backbone of the conversion;
- decompressing UA_2400_03172015.rar in overwrite under Unity Conversion folder.
Then I select good installation, first folder (unity_1 with exe), output.
Freearc isn't working so I shall go with 7zip.

At this point even with a good splitted archive, I do have the corrupt dll on unistall. It's a common problem it seems.

Now I am trying a repack with that exact dll as exclusion but ... do I have to install it manually after?

Ok, it's fixed.
Uninstall worked fine.

pakrat2k2 i have question?

add the uninstall files, & GameuxInstallHelper.dll, or move them out of game dir.

for uninstalll file it need to only uninstall.exe or uninstall.exe and uninstall.dat

Thank You sir

in UltraARC.ini

[Exclusions]
Exclude1=unins*
Exclude2=GameuxInstallHelper.dll
Exclude3=FirewallInstallHelper.dll

Will be enough, no need to move them out of game folder.