How to
 

Hi guys!I need some help!Im new to this forum.i was using the CI whole day and i was figuring out how to change the issskin of the installer.i have a black skin called vista.cjstyles. and i tried to put it in,but i didn't understand.:(

Rename vista.cjstyles to setup.cjstyles and put in Setup.cab
Anyway, read the instructions: :)
http://fileforums.com/showthread.php?t=92805

Same
 

i renamed the file into setup.cjstyles and added to setup.cab,but it didn't work!:o Plus there' is one more shitty problem,and that is i cant move the corner shitty buttons.

https://fbcdn-sphotos-a.akamaihd.net...36227465_n.jpg

go back to page1 read under setup.ini [InterfaceSettings] all to do with button settings, height/width/left/right etc.. you need to change them to suit.

R.G.RAYSIN
CI v7.2.5 doesnt support ISSkin.
Use v8.0.1 instead.

How to edit setup.ini to install the latest installation disk? thanks

[LauncherSettings]
InstallRedist = 1

Launch1 = DirectX
Launch164 = 0
Launch1BeforeInstall = 1
LaunchCom1 = Redist \ DirectX \ DxSetup.exe
LaunchArg1 = / silent

Launch2 = Microsoft Visual C + + 2008 x86
Launch264 = 0
Launch2BeforeInstall = 1
LaunchCom2 = Redist \ vcredist_x86.exe
LaunchArg2 = / q: a

Launch3 = PhysX
Launch364 = 0
Launch3BeforeInstall = 1
LaunchCom3 = Redist \ PhysX \ PhysX_7.07.09_SystemSoftware.exe
LaunchArg3 = / qn

LaunchBeforeInstall = 0

Another problem
 

Finally,have another problem,i compressed a file from 4gb to 1gb and it took me 2hrs,when i opened it ,it was with the orginal folder like Timeshift\preload\paks and when am trying to extract from C.I .it goes like this'' C:\Program Files (x86)\R.G.RAYSIN\TimeShift\TimeShift\preload\paks' '
cuz,i had setted the path (x86)\R.G.RAYSIN\TimeShift''
i need it to overwrite the default folder ''TimeShift'',uhh sorry for my bad English.:rolleyes:

when creating the archive with freearc, start in the paks folder itself, then when you extract it, you specify the path in setup.ini

no thats not the problem,the problem is the file which i compressed with freearc took me hours to compress i cant compress it again,the compressed file was in the default timeshift folder,like timeshift\preload the main file is preload i was to add the preload to archive ,unfortunately i added with the default folder,''timeshift'' i just need a way to overwrite the destination folder of the installation without installing it inside the folder two time eg;Timeshift\Timeshift\preload and i want it to be ''just timeshift\preload.is there away to extract this file up of the destination folder.overwrite!

R.G.RAYSIN there is -ap option to set main folder in archive.
If your archive structure is Timeshift\preload\packs you can use
to finally get installation structure c:\installpath\preload\packs. But unfortunately I don't know where to add this in script.

yener90 so there is my another proposition for improving CI: adding possibility to using different options for unpacking each cab in FreeArcFile# line :)

unfortunately cant add it.
why dont you directly compress the files inside the folder :/ not the folder itself...
you told took long.
if it takes really so long i would do az night. cant do here anthing...

I want to compress a file is frozen in 10gb and 27.03%, probe on another PC and same thing happens, any suggestions

[IMG]http://img829.imageshack.us/img829/6210/capturapy.png Uploaded with ImageShack.us[/IMG]

leo95 probably there is faked header at 27%. Use verbose mode (-v switch) to find its position (it'll stuck once again at 27% but you'll recive several-digit number). Now start precompressing once again and ignore this position (-i######## switch where ####### is the number given in previous step).

I get the following error when installing:

[IMG]http://img694.imageshack.us/img694/8588/data2pcf.jpg Uploaded with ImageShack.us[/IMG]

[InstallOptions]
ApplicationName=Total War Shogun 2 - Fall Of The Samurai
Publisher=SEGA
MyExecutableName=Shogun2.exe
MyExecutablePath=
SaveGameFolder=
GameSize=30000
Lang=de,en,enuk,es,esmx,fr,it,pl,pr,prbr,ru
LangUI=0
PrecompVer=0.42

[InstallSettings]
GDFBinary=BmGDFBinary.dll

[ExtractSettings]
FreeArcFile1={src}\Data2.cab;DestDir:{app}\data;Di sk:1;PrecSrep:1


You can combine Datax.cab Setup-xxx.bin and on the same project