Hi all. I wasn't about to look through all of these posts to see if this was already here but I hope it's new.

Burner:LG Electronics CED-8080B (common w/ recent Dell computers)
Software:Blindread + Blindwrite
Time to dump and burn: About 15 minutes for dump; same for burn

Successfully copied games: Age of Empires II, Age of Empires II: Conquerors Expansion, Giants: Citizen Kabuto (won't install but runs after install w/ original), No One Lives Forever, Unreal Tournament (big toughie, huh?), The Sims, Sim City 3000, Quake III Arena, Alice (installs fine but needs No-CD crack)

I'm still a newbie at this so I'm sure the list will grow longer but this was enough to impress me.

-------------------------------
Brand : HP
Model :8200 series
Software Used:Discjuggler v2.0
Special Settings w/Software:none
Successfully burned games/software:100s
-
-
-
-
-
-[/quote]

Sony crx140e

software: cdrecord cdrwin dj nero clondecd adaptec, probly some others... burned many games and burned ripped games well too...

Brand : Plextor
Model : Plextor R820T Scsi
Software Used: Nero 5.0.3.8, CDI2NERO 0.9b3 DAO,
Special Settings w/Software: For the CDI i download, i use Cdi2Nero 0.9b3 Dao to change the image format to Nero. Then i use nero to burn.
Successfully burned games/software:
-Almost every game I burn works fine on my DC.
-Evolution 2
-Jet Set Radio
-Gundam 0097
-etc........

Sincerely
Tom

Try checking this site out. I got it from here but I never used it yet. Im planing on copieing DC games soon.
CeQuadrat Software

WinOnCD Power Edition v3.7.548 + (English Help Files)
WinOnCD Power Edition v3.7.572-2 Update
PacketCD UDF v3.0 build 199
PacketCD UDF v3.0 build 209 update


HERE"S the SIte ::www.cdrsoftware.ic24.net/home.htm

Brand : PLEXTOR
Model : ULTRA PLEX 40max
PLEX WRITER 12/10/32s (BOTH scsi)
Software Used: DJ 2&3 BUT PROBLEMS
SETTINGS/ RAW READ DONT REPORT READ ERRORS

STIL NO LUCK CAN ANY OF YOU HELP

Brand : Acer/Tevion/Medion/ALDI
IDE/ATAPI Description: 4432
Model : Tevion 9898 1MB Cache Firmware 3.VR
Software Used: DJ 2, Nero 5038, CCD 2.4.8.3, CDRECORD 1.19
Special Settings w/Software: Always at 1x Speed :)
Successfully burned games/software: RECV (NON-Boot and Self-boot), MKGOLD (NB & SB), Soul Calibur (NB & SB), Virtua Tennis (NB & SB), THPS 2 (SB), Silent Scope (SB)

Made a lotta coasters but this may related to my RAM ---> 64 MB
64 MB in WinME = substract 50 % and you got your free mem :)

Brand : memorex
Model : CRW-2646
Software Used: disk juggler 3.00.758-FTU
Special Settings w/Software:
Successfully burned games/software:
-Crazy Taxi
-Capcom vs Marvel
-Capcom vs SNK
-######## Star Online
would be more but i just started burning yesturday

Brand :
Model :Creative
Software Used:CDRW 800
Special Settings w/Software:Nero, Clone CD, CDRwin
Successfully burned games/software:
-Dance Dance Rev 2
-Marvel Vs Capcom 2
-Dream Snes
-Planetscape browser 2.6
-Quake 1
-Sonic 2 trial

Brand : LG Electronics Internal IDE (8x4x32x)

Model : CED-8080B

Software Used: DJ3.0, Nero 5.???, CD Clone, Blind Read / Write

Special Settings w/Software: Tried allsorts!

Successfully burned games/software:

This drive did burn things at the beginning, but decided to crap out really quickly. As did the replacement. So I switched to a Plextor (cos of this forum). No problems. My advice : Don't buy one of these devices. You'll end up with problems.

Well really i am getting very ungry.
I have bought the plexor 12/10/32A
burner because it is said to
be excellent and i am only doing coasters.

I have installed forceaspi1.7 and finally i could install dikjuggler 2
and i could only
burn with success one game: TOKIO.

I ahve also
installed
the jinxter ghost driver.

In summary i try to burn 10 CDs and i only got success in 1 CD, i think that is a very bad rate, i was tired of
my old generic obsolete cd-rw
6*2*2 because it was slow but with
this old one i have never
had any problem burning games
with dikjuggler 3 or any other software.
Now i have spent U$S 323 in this plexor cd-rw and i am
only throwing discs to trash.

I have configured diskjuggler as follows:

Mode 2
2336
cdrom
Raw: activate.
Karaoke: activate

And i have also tried to burn at 1x and the same result, the first tracks are
always recorded successfully but the last track (about 1M) when it tries to write
it gives me an error: Event 17812 "(CDB: 2a000004aae100000a00, status: 040002, Sense: 052400) illegal field
in command descriptor block"
or something similar with different numbers.
It looks like it can not
write this last
short track properly.
I have also tried converting cdi image to nrg (nero), i have converted it
well but then when i try to burn it,
the process goes on normally the, burn proccess completes and reachs the 100% but then it gives me some error
messages
in red and the copy does not work.

I can not really understand it, i could with my old cd-rw overburn for example the cdi 80:30 image of sould calibur and with this new
cd-rw i can not even burn well anything.

Please someboby help me.

Perhaps my cd-rw is damaged ?

On other hand, i have
also
installed winoncd 3.8 power edition but i can not figure
out how to open and burn a cdi image.
This program let my only open cdj and c2d project files but
i can not open cdi files.
Please can anybody explain me how to open, configure the
parameters and burn a cdi
image succsesfuly with this program ?

Thanks, good bye.

Brand : Plextor
Model : 1610A
Software Used: WinOnCD 3.8

After the most frustrating moments in my life trying to make a copy with discjuggler (just one success, and burned at x1 speed) followed a post from this forum and tried the WinOnCD-CDcopy option... and it works GREAT.

Special Settings w/Software: just the defaults and cd-copy. No problems with speed, just leave at max.

Successfully burned games/software:
- Quake 3: Arena
- MSR (overburned)
- UFC (overburned)
- Project Justice.

(all of them self-booted)

I bought the recorder recently, so I only made these four copies, but some of them actually boot faster than the master, so i think this option is the best by now.

For non self-boot games CloneCD works fine.

My advice: if you have a burn-proof recorder forget discjuggler and use this option.

Findor

Brand : HP
Model : 7200i
Software Used: DJ 3, Nero 5
Special Settings w/Software:
Mode2, 2352, cdxa

Successfully burned games/software:
Crazy taxi
Capcom vs. snk
fighters evolution
Daytona USA (Jap)
Silent scope (Jap)
Utopia boot disc
Smash pack
Doa2 LE (Jap)
Tokyo highway racer
Hydro Thunder

iomagic 8x4x32 cheapest cd burner i could find at the time. i have never seen any compatability post for this brand. so i went to there website and they have a forum. in the forum a person writes acer makes there cd burner sure enough they do. i #####ed the model number so i have an acer 8432ia anyways
i burn with diskjuggler 3 and copy with clonecd and psx copy.

Hi i have same burner and software but am unable to copy my games for back up. Can you run me through the procedure?

Thanks

Plextor
 

Brand :
Model :plextor 12/10/32A
Software Used:Discjuggler 2.0 & 3.0
Special Settings w/Software: No settings, just pop in a blank and burn
Successfully burned games/software:
-Street Fighter 3: third strike
-marvel vs capcom 2
-soul caliber
-######## star online
-records of lodoss war
-grandia 2 (repack)
- and the list goes on and on and on...

Brand: IOMagic
Model: MagicWriter 4432
Software: DiscJuggler 3.0 and FireBurner 1.0
Special Settings: None
Sucessful burns - 20 DC games in CDI and BIN form

Brand : LG
Model : CED-8080B
Software Used: DJ 2.0
Special Settings w/Software: None
Successfully burned games/software:
Quake3, NBA2k1, Unreal tournament, Ducati, plus many more.

I saw someother guy told you not to buy this one, but it's
worked perfectly for me and was pretty cheap, so I would recommend it. DJ 3.0 doesn't work though.

Greets Sven

Brand- LG
Model- LG CD-RW CED-8120B
Software- AdaptecEZ CD C. CloneCD, DiscJuggler 3x
Special Settings-
Burned Games:

Silver
3 BootCD's
NBA 2K1
WWF Royal Rumble
2 Crazy Taxi's
NHL 2K
7 Coasters!!!!!

Has anyone here been able to burn disk juggler images using a LiteOn LTR-0841 8X/4X/32X ??

Drive: Lite-On LTR 0841 w/firmware MS8E
Software: EZCD 4 (crap), BlindRead/BlindWrite (for PSX games, toasts every DC I tried), Nero 5.5 (for DC and PSX, but it's slower than BR/BW)
Configuration: Just don't use RAW and everything will be fine

Sucess:
PSX: Spiderman, Driver 2, Castalevania Symphony Of The Night
DC: Smash Pack Volume 1
PC: Settlers 3, F1 2000 (only with crack, recorder doesn't suppor RAW ;( )

I just forgot: To burn with BlindWrite you just have to use SAO cooked mode, any other will produce PSX toast that will only work in bicycle wheesls and frisbee :))

Brand : Philips
Model : PCRW 400 series(specificaly 404)
Software Used: Discjuggler 3.xx & Nero
Special Settings w/Software: None
Successfully burned games/software:
Crazy Taxi
Virtual On
Daytona USA
Utopia Boot Disk

Brand : Crreative Labs
Model : RW 8438E
Software Used: Discjuggler 4 & Nero 5.5
Special Settings w/Software: Overbun with DJ 4
Successfully burned games/software:
Everyone that doesn't requirer that damn 11700, cause his only gives me 11702.

Anyone with a LG can record a lba 11700?

I have always used crap burners....and they have always worked....I now use a lite-on sohw 1213s dvd burner.....this burner cost under a 100 and has burned more than 50 gamez already.....I had a cheaper burner b4 and that burnt more than 150 games......never had problems...what I had to do from time to time IS not copy the 0000001.tmp and 0000002.tmp files......some programs....like nero would not copy certain games....only maybe 3 out of 200......one that comes to mind was painkiller....I could only get to 2 percent....when I excluded the files....it burned fine....same with others. When I open these temp files...there is not much to it....but they do seem to neglect certain burners with certain software programs used to burn.