im gettin all of it apart from :confused:

-first put the chip in the right position(u on bout flicking the 4 switches accordingly on the chip?)
then...
-put turn it on (put wot to turn on?)
-make sure the bios boots (how will i know if it boots)

the rest of its got me confused :o

soz dude. if ya could just clear this up for me, hopefully ill be on my way to get this dilemma resolved

to flash - http://www.dms3.com/cgi-bin/xbit/sit...oftware_manual

to install - http://www.dms3.com/cgi-bin/xbit/dia...ogopin_Install

setting up evox - http://www.fileforums.com/showthread.php?t=49079

to know if the bios boots
itll say xecuter 2 under the splash x
instead of microsoft
follow all those
chronologicaly
it should work then

cheers AXmichigan,all help appreciated. gna try it now

yea no prob
good luck
let us know if anythin goes wrong

the situation after nearly 2 yrs....no further.

i gave what you sed a go after a long break. this is the status.

1. installed and checkd the chip was in the right place (chking control points in diagram)
2. connected the chip to the computer via usb and flashed with configuration of x4
3. formated and wrote binary file EvolutionX 2.0 (1024, selected 1mb partition)
4. put the files of (default.xbe, evox.ini, bios folder and skins folder). tried with configuration of harddrive f:\ and e:\ (as it sed it needs to be changed if there is a second harddrive. i have two harddrive looking parts in mine xbox, so wasnt sure, so did both)
5. tried with both DVD+RW and CDRW...conclusion.....i get the default microsoft dashboard and the error, disk not recognised.

whats gone wrong, i followed everything step by step, but still end up here....AXmichigan or n e 1...any help?!!?!

i would appreciated n e help. ive had the chip this long and still got no where.. :(

thingsthings

i'm kind of new at this so i have a couple of questions. i had a friend that put a xbit chip in my xbox and loaded all the bios for me. i added a second HDD to my xbox. the HDD i'm using now is a 80 gig, and the new one is a 120 gig. do i need to get seperate bios to use the second HDD. i'm not even really sure what bios i'm using. i have all the wires ready for the second HDD but havn't hooked it up yet. can someone please help me.

Do you have an HDD switch, or ar you replacing the 80 gig drive with the one you have?

The bios you have is fine. You just need to unlock the current 80gig drive from the eeprom so the new drive can be used. After the 80 gig drive is unlocked, you insert the new drive and partition it. The EvolutionX dashboard can unlock the drive for you. It can also partition it.
You have to:
1. backup the current drive
2. unlock the hdd
3. swap drives
4. load evox or other application that can manage the HDD
5. partition the drive
6. send the backed-up files to the new drive

i have a hdd switch. so right now i'm running the 80 gig and want to hook the 120 gig up as a backup, cuz i'm running out of space. what should i do?

Well, then, switch to the 120gig drive and use evox to format the drive. You will need to backup the C partition of the 80gig drive so the 120gig drive will have a dashboard.
Format: http://xbox-scene.com/articles/hdd-ftp.php

You can search the net for "slayers evox auto-installer". It is a version of evox that will format and restore new and old hard-drives easily.

so i can just plug the 120 gig in, and switch to it and format it? will a menu show up to show me how to format the drive and unlock or lock (whatever is needed). is there a easier way to install a dashboard, instead of backing up partition C. and how would i backup partition C if thats the only thing i can do.

The bios are fine, someone just modifed the hash of the ini or the bios in the past. Why do you think slayers needs a newer bios flashed to the chip? You get some odd message?

A menu may or may not show up (other than the dashboard). It depends on the method. You may or may not need to backup the C partition. I already answered both of your questions in my last 2 posts.

wooah this thread is old
quall's still my boy

ok now i have a problem. when i connected the 120gig harddrive in i got a error saying the dashboard couldn't be launched. what do i do. i just opened the hdd and hooked it up. what should i have done......??????

You should have loaded up evox or compliant software, formatted the drive, and re-installed all the software/files that you backed up from your original drive.